Hi, I have tested on a 64 bit version of the same ThinkPad T60 and error is consistent..
However Firefox opens files from any folder as root on these same machines running OpenBSD 6.5. Kind regards, Kihaguru. On Sat, Aug 22, 2020 at 9:34 AM Kihaguru Gathura <[email protected]> wrote: > Hi, > > Firefox fails to list files at 'File Open' with error message: > > (firefox:89328): dconf-WARNING **: 09:12:15.835: failed to commit changes > to dconf: The given address is empty > > Please advise > > Regards, > > Kihaguru. > > > # > OpenBSD 6.7 (GENERIC.MP) #169: Thu May 7 11:37:15 MDT 2020 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > real mem = 2137341952 (2038MB) > avail mem = 2082598912 (1986MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 04/30/07, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.4 > @ 0xe0010 (68 entries) > bios0: vendor LENOVO version "79ETD3WW (2.13 )" date 04/30/2007 > bios0: LENOVO 195143U > acpi0 at bios0: ACPI 3.0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT > SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) EXP0(S4) EXP1(S4) EXP2(S4) > EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 > GHz, 06-0e-08 > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,NXE,PERF,SENSOR,MELTDOWN > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 166MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 > GHz, 06-0e-08 > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,NXE,PERF,SENSOR,MELTDOWN > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus 4 (EXP2) > acpiprt5 at acpi0: bus 12 (EXP3) > acpiprt6 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 > halt), PSS > acpicpu1 at acpi0: !C3(250@17 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 > halt), PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7 > acpitz0 at acpi0: critical temperature is 127 degC > acpitz1 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "PNP0A08" at acpi0 not configured > acpicmos0 at acpi0 > "IBM0071" at acpi0 not configured > "ATM1200" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "COMPATIBLE" serial 44 type LION oem > "SANYO" > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0: version 1.0 > acpidock0 at acpi0: GDCK not docked (0) > acpivideo0 at acpi0: VID_ > acpivout0 at acpivideo0: LCD0 > acpivideo1 at acpi0: VID_ > bios0: ROM list: 0xc0000/0xea00! 0xcf000/0x1000 0xd0000/0x1000 > 0xdc000/0x4000! 0xe0000/0x10000! > cpu0: Enhanced SpeedStep 1829 MHz: speeds: 1833, 1333, 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: apic 1 int 16, I945GM, gen 3 > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog > Devices AD1981HD > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20 > pci1 at ppb0 bus 2 > em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address > 00:15:58:c4:f6:49 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 > pci2 at ppb1 bus 3 > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, > MoW1, address 00:1b:77:4f:64:5f > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 > pci3 at ppb2 bus 4 > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23 > pci4 at ppb3 bus 12 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci5 at ppb4 bus 21 > cbb0 at pci5 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > pcmcia0 at cardslot0 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM > disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI > 1.1 > ahci0: port 0: 1.5Gb/s > scsibus2 at ahci0: 32 targets > sd0 at scsibus2 targ 0 lun 0: <ATA, HITACHI HTS54166, SBBI> > naa.5000cca521c3bc11 > sd0: 57231MB, 512 bytes/sector, 117210240 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 > int 23 > iic0 at ichiic0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 6.2, 0x81a0b1 0x300000 0x0 0xa04793 0x0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uhidev0 at uhub1 port 2 configuration 1 interface 0 "PixArt HP USB Optical > Mouse" rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse2 at ums0 mux 0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (1e4c43cb065898fd.a) swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > inteldrm0: 1024x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > wsmouse2 detached > ums0 detached > uhidev0 detached > uhidev0 at uhub1 port 2 configuration 1 interface 0 "PixArt HP USB Optical > Mouse" rev 2.00/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse2 at ums0 mux 0 > uhidev1 at uhub3 port 1 configuration 1 interface 0 "Lite-On Technology > Corp. USB Keyboard" rev 1.10/1.09 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev2 at uhub3 port 1 configuration 1 interface 1 "Lite-On Technology > Corp. USB Keyboard" rev 1.10/1.09 addr 2 > uhidev2: iclass 3/0, 2 report ids > uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 > # > >
