Upgrading to snapshot did the trick - thanks for the great work! FWIW, I still see a quick message "entry point at: ..." just blinking, but the system boots normally. There are a few devices not identified, most importantly the Touchpad (i.e., HTIX5288). Below is dmesg:
OpenBSD 6.8-current (GENERIC.MP <http://generic.mp/>) #164: Thu Nov 5 15:11:03 MST 2020 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP <http://generic.mp/> real mem = 8388608000 (8000MB) avail mem = 8119074816 (7742MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x7a01f000 (78 entries) bios0: vendor American Megatrends Inc. version "E.G140J.D8.E1.016.bin" date 11/29/2019 bios0: Default string LapBook Pro acpi0 at bios0: ACPI 6.1 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG HPET LPIT APIC NPKT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI TPM2 DBGP DBG2 WDAT WSMT acpi0: wakeup devices LID0(S3) HDAS(S3) XHC_(S3) XDCI(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 19200000 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) N4100 CPU @ 1.10GHz, 1097.34 MHz, 06-7a-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 19MHz cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) N4100 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-01 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Celeron(R) N4100 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-01 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu2: 4MB 64b/line 16-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Celeron(R) N4100 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-01 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,MD_CLEAR,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu3: 4MB 64b/line 16-way L2 cache cpu3: smt 0, core 3, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus 1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus -1 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiec0 at acpi0 acpi0: GPE 0x26 already enabled glkgpio0 at acpi0 GPO3 uid 4 addr 0xd0c80000/0x82f irq 14, 35 pins acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 model "Li-ion Battery" serial 00 type Lion oem "GLK MRD" acpibtn0 at acpi0: LID0 "HTIX5288" at acpi0 not configured "ID9001" at acpi0 not configured acpicmos0 at acpi0 glkgpio1 at acpi0 GPO1 uid 1 addr 0xd0c40000/0xcef irq 14, 80 pins glkgpio2 at acpi0 GPO0 uid 2 addr 0xd0c50000/0xaff irq 14, 80 pins glkgpio3 at acpi0 GPO2 uid 3 addr 0xd0c90000/0x7bf irq 15, 20 pins "INT33A1" at acpi0 not configured "MSFT0101" at acpi0 not configured acpibtn1 at acpi0: PWRB acpihid0 at acpi0: HIDD, 5 button array "INT3400" at acpi0 not configured "INT3403" at acpi0 not configured "PNP0C0B" at acpi0 not configured acpipwrres0 at acpi0: DRST acpipwrres1 at acpi0: DRST acpipwrres2 at acpi0: DRST acpipwrres3 at acpi0: DRST acpipwrres4 at acpi0: DRST acpipwrres5 at acpi0: DRST acpipwrres6 at acpi0: WRST acpicpu0 at acpi0: C3(10@150 io@0x419), C2(10@50 io@0x415), C1(1000@1 halt), PSS acpicpu1 at acpi0: C3(10@150 io@0x419), C2(10@50 io@0x415), C1(1000@1 halt), PSS acpicpu2 at acpi0: C3(10@150 io@0x419), C2(10@50 io@0x415), C1(1000@1 halt), PSS acpicpu3 at acpi0: C3(10@150 io@0x419), C2(10@50 io@0x415), C1(1000@1 halt), PSS acpipwrres7 at acpi0: FN00, resource for FAN0 acpitz0 at acpi0: critical temperature is 95 degC acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1101, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x03 "Intel Gemini Lake DPTF" rev 0x03 at pci0 dev 0 function 1 not configured inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 600" rev 0x03 drm0 at inteldrm0 inteldrm0: msi, GEMINILAKE, gen 9 azalia0 at pci0 dev 14 function 0 "Intel Gemini Lake HD Audio" rev 0x03: msi azalia0: codecs: Realtek ALC269, Intel/0x280d, using Realtek ALC269 audio0 at azalia0 vendor "Intel", unknown product 0x319a (class communications subclass miscellaneous, rev 0x03) at pci0 dev 15 function 0 not configured ahci0 at pci0 dev 18 function 0 "Intel Gemini Lake AHCI" rev 0x03: msi, AHCI 1.3.1 ahci0: PHY offline on port 0 ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 1 lun 0: <ATA, KINGSTON RBUSNS8, SBFK> naa.50026b7683b29e5f sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi pci1 at ppb0 bus 1 iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x03: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 22 function 0 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 22 function 1 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 22 function 2 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 22 function 3 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 0 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 1 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 2 not configured "Intel Gemini Lake I2C" rev 0x03 at pci0 dev 23 function 3 not configured "Intel Gemini Lake HSUART" rev 0x03 at pci0 dev 24 function 0 not configured "Intel Gemini Lake HSUART" rev 0x03 at pci0 dev 24 function 1 not configured "Intel Gemini Lake HSUART" rev 0x03 at pci0 dev 24 function 3 not configured "Intel Gemini Lake SPI" rev 0x03 at pci0 dev 25 function 0 not configured "Intel Gemini Lake SPI" rev 0x03 at pci0 dev 25 function 1 not configured "Intel Gemini Lake SPI" rev 0x03 at pci0 dev 25 function 2 not configured vendor "Intel", unknown product 0x31c8 (class serial bus unknown subclass 0x80, rev 0x03) at pci0 dev 26 function 0 not configured sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x03: apic 1 int 39 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma sdhc1 at pci0 dev 30 function 0 "Intel Gemini Lake SDIO" rev 0x03: apic 1 int 42 sdhc1: SDHC 3.0, 200 MHz base clock sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed, ddr52, dma pcib0 at pci0 dev 31 function 0 "Intel Gemini Lake LPC" rev 0x03 ichiic0 at pci0 dev 31 function 1 "Intel Gemini Lake SMBus" rev 0x03: apic 1 int 20 iic0 at ichiic0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 efifb at mainbus0 not configured sdmmc1: can't enable card sdmmc0: can't enable card ugen0 at uhub0 port 4 "Intel Bluetooth" rev 2.00/0.03 addr 2 uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/22.01 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 16 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/22.01 addr 3 uhidev1: iclass 3/0, 17 report ids uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 uvideo0 at uhub0 port 7 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 4 video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (80f2e3dafc09765d.a) swap on sd0b dump on sd0b drm:pid0:rc6_supported *NOTICE* RC6 and powersaving disabled by BIOS inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) iwm0: hw rev 0x210, fw ver 17.3216344376.0, address b8:9a:2a:3f:b6:6e hw.sensors.cpu0.temp0=44.00 degC hw.sensors.acpiac0.indicator0=Off (power supply) hw.sensors.acpibat0.volt0=unknown (voltage), UNKNOWN hw.sensors.acpibat0.volt1=7.60 VDC (current voltage) hw.sensors.acpibat0.power0=5.45 W (rate) hw.sensors.acpibat0.watthour0=36.46 Wh (last full capacity) hw.sensors.acpibat0.watthour1=4.80 Wh (warning capacity) hw.sensors.acpibat0.watthour2=1.46 Wh (low capacity) hw.sensors.acpibat0.watthour3=9.81 Wh (remaining capacity), OK hw.sensors.acpibat0.watthour4=38.00 Wh (design capacity) hw.sensors.acpibat0.raw0=1 (battery discharging), OK hw.sensors.acpibtn0.indicator0=On (lid open) hw.sensors.acpitz0.temp0=46.00 degC (zone temperature) On Wed, Oct 28, 2020 at 8:34 PM Theo de Raadt <[email protected]> wrote: > This particular diff is in snapshots. That's a shortcut which will let > more people try it quicker, and report back. > > > thanks to the fix from Mark, see > > https://marc.info/?l=openbsd-tech&m=160383074317608&w=2 the problem is > > solved for my machine. > > > > Best regards, > > Sven > > > > On 10/10/20 11:56 AM, Sven Wolf wrote: > > > Hi, > > > > > > on my Lenovo V130 I've to build a custom kernel without radeondrm and > > > amdgpu. > > > > > > https://marc.info/?l=openbsd-misc&m=159276382718317&w=2 > > > > > > The modified efiboot.c, see > > > https://marc.info/?l=openbsd-misc&m=159401011632149&w=2, doesnt work > on > > > this machine. > > > > > > Best regards, > > > Sven > > > > > > On 10/9/20 9:32 PM, Kastus Shchuka wrote: > > >> On Fri, Oct 09, 2020 at 03:37:37PM +0400, Michel von Behr wrote: > > >>> Hi all, > > >>> I'm trying to run snapshot on a Chuwi Lapbook laptop (Intel Gemini > > >>> Lake), > > >>> but I get stuck at boot time with the message "entry point at: > > >>> 0x1001000". > > >>> Based on previous discussions [1] it looks like the problem is with > > >>> BOOTX64.EFI > > >>> For now I'll be running -stable, but I would like to follow > -current. Is > > >>> there a way to run -current with an old version of BOOTX64.EFI for > > >>> example? > > >>> (i.e., the only alternatives I'm seeing is either 1) compiling a > GENERIC > > >>> kernel with the older version of BOOTX64.EFI src, or 2) (try to) > > >>> compile a > > >>> custom/smaller kernel to avoid the issue). > > >>> > > >>> [1] https://marc.info/?l=openbsd-misc&m=159147446008114&w=2 > > >>> > > >>> Any pointing to the right direction is welcome. > > >> > > >> I had the same problem with EFI on ASRock J4105M system, essentially > > >> failing > > >> to boot a kernel larger than certain size. I posted my solution here: > > >> > > >> https://marc.info/?l=openbsd-misc&m=159401011632149&w=2 > > >> > > >> I guess the patch requires more testing before asking for it to be > > >> committed. > > >> > > >> Thanks, > > >> > > >> Kastus > > >> > > > >
