Hello, just installed a fresh 6.8 on an old but good Acer Aspire One netbook.
If I activate wsmoused=-2 in rc.conf.local the trackpad works correctly in CLI but stops working in X. If I kill wsmoused and rcctl restart xenodm the trackpad works correctly in X. wsmoused -i reports "wsmouse supported mouse: PS/2 compatible" May this be a bug? dmesg follows, thanks P OpenBSD 6.8 (GENERIC.MP) #1: Tue Nov 3 09:06:20 MST 2020 r...@syspatch-68-i386.openbsd.org:/usr/src/sys/arch/i386/compile/ GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> real mem = 1596956672 (1522MB) avail mem = 1551470592 (1479MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 10/06/08, SMBIOS rev. 2.4 @ 0xe8e70 (32 entries) bios0: vendor Acer version "v0.3310" date 10/06/2008 bios0: Acer AOA110 acpi0 at bios0: ACPI 4.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz, 06-1c-02 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,SENSOR,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz, 06-1c-02 cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,SENSOR,MELTDOWN ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins, remapped acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P32_) acpiprt2 at acpi0: bus 1 (EXP1) acpiprt3 at acpi0: bus 2 (EXP2) acpiprt4 at acpi0: bus 3 (EXP3) acpiprt5 at acpi0: bus 4 (EXP4) acpiec0 at acpi0 acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online "PNP0A08" at acpi0 not configured acpicmos0 at acpi0 "PNP0C14" at acpi0 not configured acpicpu0 at acpi0: !C3(100@57 io@0x416), !C2(500@1 io@0x414), C1(1000@1 halt), PSS acpicpu1 at acpi0: !C3(100@57 io@0x416), !C2(500@1 io@0x414), C1(1000@1 halt), PSS acpivideo0 at acpi0: OVGA bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0x60000000, size 0x10000000 inteldrm0: apic 4 int 16, I945GM, gen 3 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Realtek ALC268 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 pci2 at ppb1 bus 2 2:0:0: rom address conflict 0xfffe0000/0x20000 re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address 00:1e:68:a6:cc:5e rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 pci3 at ppb2 bus 3 iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:22:fa:11:a8:e8 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 pci4 at ppb3 bus 4 4:0:0: rom address conflict 0xffff8000/0x8000 "JMicron SD/MMC" rev 0x00 at pci4 dev 0 function 0 not configured sdhc0 at pci4 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4 int 19 sdhc0: SDHC 2.0, 50 MHz base clock sdmmc0 at sdhc0: 4-bit, dma "JMicron Memory Stick" rev 0x00 at pci4 dev 0 function 3 not configured "JMicron xD" rev 0x00 at pci4 dev 0 function 4 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 1 drive 0: <TOSHIBA MK3008GAL> wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard *pms0 at pckbc0 (aux slot)wsmouse0 at pms0 mux 0* pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 scsibus1 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <SD/MMC, SMI, 0010> removable sd0: 15399MB, 512 bytes/sector, 31537152 sectors uvideo0 at uhub0 port 5 configuration 1 interface 0 "SuYin Acer Crystal Eye webcam" rev 2.00/0.01 addr 2 video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on wd0a (e25b9dadfbce5987.a) swap on wd0b dump on wd0b inteldrm0: 1024x600, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)