Date: 8 Dec 2020, 14:35 From: [email protected] To: [email protected] Subject: OT acpi failure
> hallo list, > > my machine had one of the ahci failures after which it very fast went > stiff (just the caps and num locks did light on/off if appropriate keys > got pressed). "very fast" means like a half a minute during which i > managed to switch to ttyC0 to see this "one of the ahci failure" > messages that i suspect come from the kernel(?): > > $ doas strings /bsd | fgrep ahci | tail -3 > %s: ahci_pmp_probe_timeout: failed to clear active cmds: %08x > ahci > %s: ahci_pmp_probe_timeout: ccb in bad state %d > > yes, i panicked enough not to take down the message and whether it was > the first or the third one of the three showed above (it definitely read > "ahci0:" at the front of it and "31" at the very end of it) i'm not that > concerned about because the sole question i have to you Gurus is if this > is a dying motherboard or a dying hard disk (the boot one, the other two > are data) > > i dare to ask because duckduckgoing from my corner of the web reveals > 99% M$ noise with the remaining 1% even more nonsense. > > in the meantime i repluged the disk (with the same cable) to another > sata port and i'm hoping to luckily survive till someone knowledgeable > returns with the answer so i know what to mock Mr S.C. for. > /tru > > > OpenBSD 6.7 (GENERIC.MP) #182: Thu May 7 11:11:58 MDT 2020 > > [email protected]> :/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3991404544 (3806MB) > avail mem = 3857817600 (3679MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (52 entries) > bios0: vendor American Megatrends Inc. version "1701" date 11/18/2016 > bios0: ASUSTeK Computer INC. M5A78L-M LX V2 > acpi0 at bios0: ACPI 3.0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) RLAN(S4) PCE5(S4) PCE6(S4) > PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PS2K(S4) UAR1(S4) > P0PC(S4) UHC1(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 16 (boot processor) > cpu0: AMD FX(tm)-4170 Quad-Core Processor, 4219.57 MHz, 15-01-02 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TOPEXT,CPCTR,ITSC > cpu0: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache, 8MB 64b/line 64-way L3 cache > cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 32 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 17 (application processor) > cpu1: AMD FX(tm)-4170 Quad-Core Processor, 4218.96 MHz, 15-01-02 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TOPEXT,CPCTR,ITSC > cpu1: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache, 8MB 64b/line 64-way L3 cache > cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu1: DTLB 32 4KB entries fully associative, 32 4MB entries fully associative > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 18 (application processor) > cpu2: AMD FX(tm)-4170 Quad-Core Processor, 4218.97 MHz, 15-01-02 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TOPEXT,CPCTR,ITSC > cpu2: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache, 8MB 64b/line 64-way L3 cache > cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu2: DTLB 32 4KB entries fully associative, 32 4MB entries fully associative > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 19 (application processor) > cpu3: AMD FX(tm)-4170 Quad-Core Processor, 4218.96 MHz, 15-01-02 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TOPEXT,CPCTR,ITSC > cpu3: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line > 16-way L2 cache, 8MB 64b/line 64-way L3 cache > cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative > cpu3: DTLB 32 4KB entries fully associative, 32 4MB entries fully associative > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 20 pa 0xfec00000, version 21, 24 pins, can't remap > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus 2 (PCE4) > acpiprt5 at acpi0: bus -1 (PCE9) > acpiprt6 at acpi0: bus -1 (PCEA) > acpiprt7 at acpi0: bus 3 (P0PC) > acpicpu0 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS > acpicpu2 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS > acpicpu3 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS > acpipci0 at acpi0 PCI0: _OSC failed > acpicmos0 at acpi0 > aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM > acpibtn0 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > cpu0: 4219 MHz: speeds: 4200 4100 3700 2900 2100 1400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev > 0x00 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 3000" rev 0x00 > drm0 at radeondrm0 > radeondrm0: apic 20 int 18 > ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL > (0x2c80), msi, address c8:60:00:58:3d:68 > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 20 int 22, > AHCI 1.1 > ahci0: port 1: 3.0Gb/s > ahci0: port 2: 3.0Gb/s > ahci0: port 3: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 1 lun 0: <ATA, KIOXIA-EXCERIA S, SBFA> > naa.58ce38e10000ee52 > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > sd1 at scsibus1 targ 2 lun 0: <ATA, KIOXIA-EXCERIA S, SBFA> > naa.58ce38e10000ee44 > sd1: 228936MB, 512 bytes/sector, 468862128 sectors, thin > sd2 at scsibus1 targ 3 lun 0: <ATA, WDC WD5002AALX-0, 15.0> > naa.50014ee206d0229a > sd2: 476940MB, 512 bytes/sector, 976773168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 20 int 16, > version 1.0, legacy support > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 20 int 16, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 20 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 > addr 1 > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 20 int 18, > version 1.0, legacy support > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 20 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 20 int 19 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 > addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI > iic0 at piixpm0 > iic0: addr 0x20 01=11 02=22 04=00 05=00 06=00 07=00 09=00 0a=0d 0b=0d 0c=0d > 0d=0d 0e=36 0f=8b 10=00 11=10 12=10 13=00 14=00 15=0e 16=42 17=9d 18=80 19=fb > 1a=a2 1b=9d 1c=a9 1d=80 1e=0c 1f=03 20=09 21=09 22=09 23=09 24=03 3e=8b words > 00=ff11 01=1122 02=22ff 03=ff00 04=0000 05=0000 06=0000 07=00ff > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus2 at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <ATAPI, iHAS122, ZL0F> removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 20 int > 16 > azalia0: codecs: Realtek/0x0887 > audio0 at azalia0 > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci3 at ppb2 bus 3 > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 20 int 18, > version 1.0, legacy support > pchb1 at pci0 dev 24 function 0 "AMD 15/0xh Link Cfg" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD 15/0xh Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD 15/0xh DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD 15/0xh Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD 15/0xh CPU Power" rev 0x00 > pchb5 at pci0 dev 24 function 5 "AMD 15/0xh Host" rev 0x00 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > addr 1 > usb4 at ohci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > addr 1 > usb5 at ohci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0x290 > usb6 at ohci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 > addr 1 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd2a (3fbcab53d9dc28d5.a) swap on sd2b dump on sd2b > initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388 0x00). > radeondrm0: 1920x1080, 32bpp > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > >
