On 1/12/21 9:41 PM, Duncan Patton a Campbell wrote:
Howdy all? I'm wondering if more than one RAID1 array is supported in 6.7++ I'm having problems that could be bios limitations, OS, or a bad SATA (Pwr?) cable. Currently I'm going with the latter and rebuilding the RAID (again) but was just wondering if anyone has run a config with more than one RAID array... ... Volume Status Size Device softraid0 0 Rebuild 4000786694656 sd5 RAID1 3% done 0 Rebuild 4000786694656 0:0.0 noencl <sd2a> 1 Online 4000786694656 0:1.0 noencl <sd3a> softraid0 1 Rebuild 2000396018176 sd6 RAID1 72% done 0 Rebuild 2000396018176 1:0.0 noencl <sd0a> 1 Online 2000396018176 1:1.0 noencl <sd1a> Thanks, Dhu (dmesg attached, oh and Happy New Years to you;)
/home/nick $ doas bioctl softraid0 Volume Status Size Device softraid0 0 Online 6001174724608 sd5 RAID1 0 Online 6001174724608 0:0.0 noencl <sd3d> 1 Online 6001174724608 0:1.0 noencl <sd2d> softraid0 1 Online 4000786726912 sd6 RAID1 0 Online 4000786726912 1:0.0 noencl <sd1a> 1 Online 4000786726912 1:1.0 noencl <sd0a> softraid0 2 Online 6001174323200 sd7 CRYPTO 0 Online 6001174323200 2:0.0 noencl <sd5a> so ... uh...yeah. And yes, that crypto is on top a RAID1 set. Doing things wrong, I am. :) What's the problem you are having? That being said -- I did have some issues here that may have been related to a couple old disks of uncertain history. Pretty sure it ultimately boiled down to bad spot on this drive, different bad spot on that drive, and as a result, neither drive could rebuild onto the other. That definitely happens with RAID1. Nick.