On Mon, Feb 15, 2021 at 01:57:23AM -0800, harold felton wrote:
> howdee,
>
> this is totally not critical, but i will go ahead and ask:
>
> assuming that i have added the following to /etc/mk.conf...
> DEBUG=-g
> KEEPKERNELS=yes
> SUDO=doas
> WARNINGS=-Wall
>
> how big do i need the /usr/obj partition to be ?
DEBUG=-g makes things way bigger. KEEPKERNELS is also leaving more
cruft afaik.
You are not compiling with standard options, so how should we know?
-Otto
>
> i do not remember specifically adjusting the /usr/xxx partitions
> when i was initially installing this system - but i clearly changed
> something...
> because the answer for 'df -h' is as follows:
> Filesystem Size Used Avail Capacity Mounted on
> /dev/sd0a 986M 121M 816M 13% /
> /dev/sd0k 18.8G 1.5G 16.3G 8% /home
> /dev/sd0d 3.9G 10.0K 3.7G 0% /tmp
> /dev/sd0f 5.8G 2.8G 2.7G 51% /usr
> /dev/sd0g 986M 236M 701M 25% /usr/X11R6
> /dev/sd0h 15.7G 286K 14.9G 0% /usr/local
> /dev/sd0j 5.8G 4.9G 636M 89% /usr/obj
> /dev/sd0i 1.9G 1.2G 618M 67% /usr/src
> /dev/sd0e 11.6G 8.8M 11.0G 0% /var
> /dev/sd0l 1.9G 344K 1.8G 0% /var/log
> /dev/sd0m 9.7G 1.3M 9.2G 0% /var/www
> /dev/sd0n 27.1G 2.0K 25.8G 0% /xtra
>
> i will include the dmesg below, altho i doubt it is critical other than
> to note that the size of my sd0 is 120Gb...
>
> i was also going to ask about a bunch of warnings that i saw scroll by
> "dwarf2 only supports one compilation unit" or something...
> i didnt think that these warning were important since i noticed that freebsd
> had already dealt with them around 2016-2018 when compiling golang...
> (see: https://github.com/golang/go/issues/14705)
>
> anyways - i was going to try and learn how to use the debugger, etc...
> and thought it would be useful to have all the symbols and code available...
> i got thru the https://man.openbsd.org/release step-2 and was trying to
> do the 'make build' of base when i ran-out-of-space...
>
> i have a feeling that i would have been fine only compiling non-debug,
> but figured this question might be an faq-type answer that i could ask...
>
> ok - heres my current dmesg (was running -current from a few days back
> until i had just-compiled the -current system i ran out of space on)
>
> fyi - this is a pcengines apu4d4 - if that helps...
> tia, h.
>
>
>
> OpenBSD 6.9-beta (GENERIC.MP) #0: Sat Feb 13 09:41:26 PST 2021
> [email protected]:/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4259868672 (4062MB)
> avail mem = 4115427328 (3924MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xcfe8a040 (13 entries)
> bios0: vendor coreboot version "v4.12.0.6" date 10/29/2020
> bios0: PC Engines apu4
> acpi0 at bios0: ACPI 6.0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP SSDT MCFG TPM2 APIC HEST SSDT SSDT DRTM HPET
> acpi0: wakeup devices PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3)
> UOH2(S3) UOH3(S3) UOH4(S3) UOH5(S3) UOH6(S3) XHC0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-64
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD GX-412TC SOC, 998.29 MHz, 16-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD GX-412TC SOC, 998.14 MHz, 16-30-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PBR4)
> acpiprt2 at acpi0: bus 2 (PBR5)
> acpiprt3 at acpi0: bus 3 (PBR6)
> acpiprt4 at acpi0: bus 4 (PBR7)
> acpiprt5 at acpi0: bus -1 (PBR8)
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> amdgpio0 at acpi0 GPIO uid 0 addr 0xfed81500/0x300 irq 7, 184 pins
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "PRP0001" at acpi0 not configured
> "BOOT0000" at acpi0 not configured
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpitz0 at acpi0: critical temperature is 115 degC
> cpu0: 998 MHz: speeds: 1000 800 600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD 16h Root Complex" rev 0x00
> vendor "AMD", unknown product 0x1567 (class system subclass IOMMU, rev
> 0x00) at pci0 dev 0 function 2 not configured
> pchb1 at pci0 dev 2 function 0 "AMD 16h Host" rev 0x00
> ppb0 at pci0 dev 2 function 1 "AMD 16h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:55:bb:64
> ppb1 at pci0 dev 2 function 2 "AMD 16h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:55:bb:65
> ppb2 at pci0 dev 2 function 3 "AMD 16h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 3
> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:55:bb:66
> ppb3 at pci0 dev 2 function 4 "AMD 16h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 4
> em3 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:55:bb:67
> ccp0 at pci0 dev 8 function 0 "AMD 16h Crypto" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00
> addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int
> 19, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SUV500M, 0030>
> naa.50026b778366041b
> sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMI
> iic0 at piixpm0
> iic1 at piixpm0
> iic1: addr 0x4c 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=ffff 01=ffff
> 02=ffff 03=ffff 04=ffff 05=ffff 06=ffff 07=ffff
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> pchb2 at pci0 dev 24 function 0 "AMD 16h Link Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 1 "AMD 16h Address Map" rev 0x00
> pchb4 at pci0 dev 24 function 2 "AMD 16h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD 16h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD 16h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD 16h Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> intr_establish: pic ioapic0 pin 7: can't share type 3 with 2
> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> vmm0 at mainbus0: SVM/RVI
> umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Glide
> 3.0" rev 3.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Glide 3.0, 1.00> removable
> serial.07815597270613208130
> sd1: 59520MB, 512 bytes/sector, 121896960 sectors
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices
> Hub" rev 2.00/0.18 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (86227d5b7242e1d4.a) swap on sd0b dump on sd0b
> uid 21 on /usr/obj: file system full
