Hi,
Please consider to move to VirtualBox. No any problems with networking at all
on any host platform. Network works fine using OpenBSD VMM hypervisor too.
Martin
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Wednesday, May 12, 2021 9:48 AM, Moritz Grimm <mgmlist...@mrsserver.net>
wrote:
> Hi Masato,
>
> Thanks for checking. I'm currently stuck with Workstation Pro 15.5.7
> build-17171714.
> It seems likely that it is an interaction between Workstation and some
> changes between 6.8 and 6.9 that causes this regression. It's not clear
> whose fault it is for this misbehavior. However, none of the previous
> OpenBSD versions, various Linux distros, and Windows VMs I'm running
> exhibit this.
> It would be interesting to know, if there is more than just ENOBUFS and
> high Ofail numbers that I could look for to pinpoint the root cause ...
>
> Best regards,
> -Moritz
>
> On 12.05.21 11:14, Masato Asou wrote:
>
> > I've also tried VMware Workstation 16 Player on Windows10 Pro and the
> > netowrk is working fine.
> >
> > -----------------------------------------------------------------------------------------------
> >
> > ASOU Masato
> > From: Masato Asou a...@soum.co.jp
> > Date: Wed, 12 May 2021 12:51:48 +0900 (JST)
> >
> > > Hi Moritz,
> > > I upgraded with the following command on my OpenBSD 6.8 release, and
> > > the network is working fine.
> > > $ doas sysupgrade
> > > I am using ESXi 6.7 and VMware Fusion 12.1.1 and em0 both environment,
> > > and network is working fine both environment.
> > >
> > > Isn't it a VMware Workstation problem?
> > > Can you try VirtualBox?
> > >
> > > ---------------------------------------------------------------
> > >
> > > ASOU Masato
> > > From: Moritz Grimm mgmlist...@mrsserver.net
> > > Date: Wed, 12 May 2021 00:32:42 +0200
> > >
> > > > Hi,
> > > > Networking has become unusable in all of my virtual installs of 6.9 on
> > > > VMware Workstation after an (otherwise uneventful) sysupgrade from 6.8
> > > > to 6.9. They've been working for years and I've upgraded them several
> > > > times without any issues so far.
> > > > netstat -ni shows a huge number of Ofail and ping almost always prints
> > > > and error from sendmsg ("No buffer space available"), but the
> > > > occasional ping and DNS lookup does go through (at a success rate of
> > > > <5%). These are the only error messages I am getting.
> > > > I'm using vmx(4), but also tried em(4) without any success.
> > > > None of the upgrade69.html configuration changes are applicable, and
> > > > my pf.conf parses without errors in 6.9.
> > > > The dmesg output (from version 6.8 below) is almost identical in 6.9,
> > > > which just shows slightly less memory available.
> > > > I've run out of debugging ideas and would appreciate some help. My
> > > > only "solution" right now was to revert to a 6.8 snapshot. I'm also a
> > > > bit worried that I might run into similar issues on my bare metal
> > > > installs (which are all "production"), so I haven't tried those, yet.
> > > > Thanks,
> > > > -Moritz
> > > > OpenBSD 6.8 (GENERIC.MP) #5: Mon Feb 22 04:36:10 MST 2021
> > > > r...@syspatch-68-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > > real mem = 519962624 (495MB)
> > > > avail mem = 489213952 (466MB)
> > > > random: good seed from bootblocks
> > > > mpath0 at root
> > > > scsibus0 at mpath0: 256 targets
> > > > mainbus0 at root
> > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0010 (620 entries)
> > > > bios0: vendor Phoenix Technologies LTD version "6.00" date 02/27/2020
> > > > bios0: VMware, Inc. VMware Virtual Platform
> > > > acpi0 at bios0: ACPI 4.0
> > > > acpi0: sleep states S0 S1 S4 S5
> > > > acpi0: tables DSDT FACP BOOT APIC MCFG SRAT HPET WAET
> > > > acpi0: wakeup devices PCI0(S3) USB_(S1) P2P0(S3) S1F0(S3) S2F0(S3)
> > > > S8F0(S3) S16F(S3) S17F(S3) S18F(S3) S22F(S3) S23F(S3) S24F(S3)
> > > > S25F(S3) PE40(S3) S1F0(S3) PE50(S3) [...]
> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > > cpu0 at mainbus0: apid 0 (boot processor)
> > > > cpu0: Intel(R) Core(TM) i7-9850H CPU @ 2.60GHz, 2593.36 MHz, 06-9e-0d
> > > > cpu0:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,IBRS,IBPB,STIBP,L1DF,SSBD,ARAT,XSAVEOPT,XSAVEC,XSAVES
> > > > cpu0: 256KB 64b/line 8-way L2 cache
> > > > cpu0: smt 0, core 0, package 0
> > > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > > cpu0: apic clock running at 65MHz
> > > > cpu1 at mainbus0: apid 2 (application processor)
> > > > cpu1: Intel(R) Core(TM) i7-9850H CPU @ 2.60GHz, 2593.40 MHz, 06-9e-0d
> > > > cpu1:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SS,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,IBRS,IBPB,STIBP,L1DF,SSBD,ARAT,XSAVEOPT,XSAVEC,XSAVES
> > > > cpu1: 256KB 64b/line 8-way L2 cache
> > > > cpu1: smt 0, core 0, package 2
> > > > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > > > acpimcfg0 at acpi0
> > > > acpimcfg0: addr 0xf0000000, bus 0-127
> > > > acpihpet0 at acpi0: 14318179 Hz
> > > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> > > > acpicmos0 at acpi0
> > > > "PNP0A05" at acpi0 not configured
> > > > acpibat0 at acpi0: BAT1 model "VMware Virtual Batt"
> > > > acpiac0 at acpi0: AC unit online
> > > > "PNP0A05" at acpi0 not configured
> > > > "PNP0A05" at acpi0 not configured
> > > > "PNP0A05" at acpi0 not configured
> > > > "PNP0A05" at acpi0 not configured
> > > > "PNP0A05" at acpi0 not configured
> > > > acpicpu0 at acpi0: C1(@1 halt!)
> > > > acpicpu1 at acpi0: C1(@1 halt!)
> > > > pvbus0 at mainbus0: VMware
> > > > vmt0 at pvbus0
> > > > pci0 at mainbus0 bus 0
> > > > pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> > > > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> > > > pci1 at ppb0 bus 1
> > > > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> > > > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> > > > channel 0 configured to compatibility, channel 1 configured to
> > > > compatibility
> > > > pciide0: channel 0 disabled (no drives)
> > > > pciide0: channel 1 disabled (no drives)
> > > > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
> > > > disabled
> > > > "VMware VMCI" rev 0x10 at pci0 dev 7 function 7 not configured
> > > > vga1 at pci0 dev 15 function 0 "VMware SVGA II" rev 0x00
> > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > > mpi0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: apic
> > > > 1 int 17
> > > > mpi0: 0, firmware 1.3.41.32
> > > > scsibus1 at mpi0: 16 targets, initiator 7
> > > > ppb1 at pci0 dev 17 function 0 "VMware PCI" rev 0x02
> > > > pci2 at ppb1 bus 2
> > > > uhci0 at pci2 dev 0 function 0 "VMware UHCI" rev 0x00: apic 1 int 18
> > > > ehci0 at pci2 dev 2 function 0 "VMware EHCI" rev 0x00: apic 1 int 16
> > > > usb0 at ehci0: USB revision 2.0
> > > > uhub0 at usb0 configuration 1 interface 0 "VMware EHCI root hub" rev
> > > > 2.00/1.00 addr 1
> > > > ahci0 at pci2 dev 4 function 0 "VMware AHCI" rev 0x00: msi, AHCI 1.3
> > > > ahci0: port 0: 6.0Gb/s
> > > > scsibus2 at ahci0: 32 targets
> > > > sd0 at scsibus2 targ 0 lun 0: <ATA, VMware Virtual S, 0000>
> > > > naa.5000c29ce484fefa
> > > > sd0: 8192MB, 512 bytes/sector, 16777216 sectors
> > > > usb1 at uhci0: USB revision 1.0
> > > > uhub1 at usb1 configuration 1 interface 0 "VMware UHCI root hub" rev
> > > > 1.00/1.00 addr 1
> > > > ppb2 at pci0 dev 21 function 0 "VMware PCIE" rev 0x01: msi
> > > > pci3 at ppb2 bus 3
> > > > vmx0 at pci3 dev 0 function 0 "VMware VMXNET3" rev 0x01: msix, 2
> > > > queues, address 00:50:56:39:49:ec
> > > > ppb3 at pci0 dev 21 function 1 "VMware PCIE" rev 0x01: msi
> > > > pci4 at ppb3 bus 4
> > > > ppb4 at pci0 dev 21 function 2 "VMware PCIE" rev 0x01: msi
> > > > pci5 at ppb4 bus 5
> > > > ppb5 at pci0 dev 21 function 3 "VMware PCIE" rev 0x01: msi
> > > > pci6 at ppb5 bus 6
> > > > ppb6 at pci0 dev 21 function 4 "VMware PCIE" rev 0x01: msi
> > > > pci7 at ppb6 bus 7
> > > > ppb7 at pci0 dev 21 function 5 "VMware PCIE" rev 0x01: msi
> > > > pci8 at ppb7 bus 8
> > > > ppb8 at pci0 dev 21 function 6 "VMware PCIE" rev 0x01: msi
> > > > pci9 at ppb8 bus 9
> > > > ppb9 at pci0 dev 21 function 7 "VMware PCIE" rev 0x01: msi
> > > > pci10 at ppb9 bus 10
> > > > ppb10 at pci0 dev 22 function 0 "VMware PCIE" rev 0x01: msi
> > > > pci11 at ppb10 bus 11
> > > > vmx1 at pci11 dev 0 function 0 "VMware VMXNET3" rev 0x01: msix, 2
> > > > queues, address 00:50:56:37:24:4b
> > > > ppb11 at pci0 dev 22 function 1 "VMware PCIE" rev 0x01: msi
> > > > pci12 at ppb11 bus 12
> > > > ppb12 at pci0 dev 22 function 2 "VMware PCIE" rev 0x01: msi
> > > > pci13 at ppb12 bus 13
> > > > ppb13 at pci0 dev 22 function 3 "VMware PCIE" rev 0x01: msi
> > > > pci14 at ppb13 bus 14
> > > > ppb14 at pci0 dev 22 function 4 "VMware PCIE" rev 0x01: msi
> > > > pci15 at ppb14 bus 15
> > > > ppb15 at pci0 dev 22 function 5 "VMware PCIE" rev 0x01: msi
> > > > pci16 at ppb15 bus 16
> > > > ppb16 at pci0 dev 22 function 6 "VMware PCIE" rev 0x01: msi
> > > > pci17 at ppb16 bus 17
> > > > ppb17 at pci0 dev 22 function 7 "VMware PCIE" rev 0x01: msi
> > > > pci18 at ppb17 bus 18
> > > > ppb18 at pci0 dev 23 function 0 "VMware PCIE" rev 0x01: msi
> > > > pci19 at ppb18 bus 19
> > > > xhci0 at pci19 dev 0 function 0 "VMware xHCI" rev 0x00: msi, xHCI 1.0
> > > > usb2 at xhci0: USB revision 3.0
> > > > uhub2 at usb2 configuration 1 interface 0 "VMware xHCI root hub" rev
> > > > 3.00/1.00 addr 1
> > > > ppb19 at pci0 dev 23 function 1 "VMware PCIE" rev 0x01: msi
> > > > pci20 at ppb19 bus 20
> > > > ppb20 at pci0 dev 23 function 2 "VMware PCIE" rev 0x01: msi
> > > > pci21 at ppb20 bus 21
> > > > ppb21 at pci0 dev 23 function 3 "VMware PCIE" rev 0x01: msi
> > > > pci22 at ppb21 bus 22
> > > > ppb22 at pci0 dev 23 function 4 "VMware PCIE" rev 0x01: msi
> > > > pci23 at ppb22 bus 23
> > > > ppb23 at pci0 dev 23 function 5 "VMware PCIE" rev 0x01: msi
> > > > pci24 at ppb23 bus 24
> > > > ppb24 at pci0 dev 23 function 6 "VMware PCIE" rev 0x01: msi
> > > > pci25 at ppb24 bus 25
> > > > ppb25 at pci0 dev 23 function 7 "VMware PCIE" rev 0x01: msi
> > > > pci26 at ppb25 bus 26
> > > > ppb26 at pci0 dev 24 function 0 "VMware PCIE" rev 0x01: msi
> > > > pci27 at ppb26 bus 27
> > > > ppb27 at pci0 dev 24 function 1 "VMware PCIE" rev 0x01: msi
> > > > pci28 at ppb27 bus 28
> > > > ppb28 at pci0 dev 24 function 2 "VMware PCIE" rev 0x01: msi
> > > > pci29 at ppb28 bus 29
> > > > ppb29 at pci0 dev 24 function 3 "VMware PCIE" rev 0x01: msi
> > > > pci30 at ppb29 bus 30
> > > > ppb30 at pci0 dev 24 function 4 "VMware PCIE" rev 0x01: msi
> > > > pci31 at ppb30 bus 31
> > > > ppb31 at pci0 dev 24 function 5 "VMware PCIE" rev 0x01: msi
> > > > pci32 at ppb31 bus 32
> > > > ppb32 at pci0 dev 24 function 6 "VMware PCIE" rev 0x01: msi
> > > > pci33 at ppb32 bus 33
> > > > ppb33 at pci0 dev 24 function 7 "VMware PCIE" rev 0x01: msi
> > > > pci34 at ppb33 bus 34
> > > > isa0 at pcib0
> > > > isadma0 at isa0
> > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > > pckbd0 at pckbc0 (kbd slot)
> > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > > pms0 at pckbc0 (aux slot)
> > > > wsmouse0 at pms0 mux 0
> > > > pcppi0 at isa0 port 0x61
> > > > spkr0 at pcppi0
> > > > ugen0 at uhub1 port 1 "VMware Virtual Bluetooth Adapter" rev 2.00/1.00
> > > > addr 2
> > > > uhub3 at uhub1 port 2 configuration 1 interface 0 "VMware, Inc. VMware
> > > > Virtual USB Hub" rev 1.10/1.00 addr 3
> > > > uhidev0 at uhub2 port 5 configuration 1 interface 0 "VMware VMware
> > > > Virtual USB Mouse" rev 1.10/1.03 addr 2
> > > > uhidev0: iclass 3/1
> > > > ums0 at uhidev0: 8 buttons, Z dir
> > > > wsmouse1 at ums0 mux 0
> > > > uhub4 at uhub2 port 7 configuration 1 interface 0 "VMware, Inc. VMware
> > > > Virtual USB Hub" rev 1.10/1.00 addr 3
> > > > uhub5 at uhub2 port 8 configuration 1 interface 0 "VMware, Inc. VMware
> > > > Virtual USB Hub" rev 2.00/1.00 addr 4
> > > > vscsi0 at root
> > > > scsibus3 at vscsi0: 256 targets
> > > > softraid0 at root
> > > > scsibus4 at softraid0: 256 targets
> > > > root on sd0a (3120f69446a48fa2.a) swap on sd0b dump on sd0b
