Hi,

I also have this issue on a fresh install of 6.9 amd64. I reported it as a bug 
last week to “bugs” mail list with all appropriate information. I can confirm 
that plugging in a monitor will allow my system to boot. I did not have the 001 
patch installed.


Antonino Sidoti



> On 16 May 2021, at 8:35 pm, Jonathan Gray <[email protected]> wrote:
> 
> On Sun, May 16, 2021 at 12:10:33PM +0200, Harald Dunkel wrote:
>> And another attempt, see attachment.
>> 
>> Seems I have to power cycle to make it boot.
> 
> There have been a few reports of this in the last few weeks.
> An initial workaround patch is in
> https://marc.info/?l=openbsd-bugs&m=162012367130138&w=2
> 
> If you can plug in a display does this still occur afterwards?
> 
>> 
>> 
>> Regards
>> Harri
> 
>> OpenBSD/amd64 (redgatea.red.aixigo.de) (tty00)
>> 
>> login: root
>> Password:
>> Last login: Sun May 16 11:45:27 on ttyp0 from 2a00:fe0:30:60::7a
>> OpenBSD 6.8 (GENERIC.MP) #5: Mon Feb 22 04:36:10 MST 2021
>> 
>> Welcome to OpenBSD: The proactively secure Unix-like operating system.
>> 
>> Please use the sendbug(1) utility to report bugs in the system.
>> Before reporting a bug, please try to reproduce it with the latest
>> version of the code.  With bug reports, please try to ensure that
>> enough information to reproduce the problem is enclosed, and if a
>> known fix for it exists, include that as well.
>> 
>> You have mail.
>> redgatea# sysupgrade                                                    
>> Fetching from https://cdn.openbsd.org/pub/OpenBSD/6.9/amd64/
>> SHA256.sig   100% |*************************************|  2144       00:00  
>>   
>> Signature Verified
>> INSTALL.amd64 100% |************************************| 43523       00:00  
>>   
>> base69.tgz   100% |*************************************|   291 MB    00:16  
>>   
>> bsd          100% |*************************************| 20423 KB    00:02  
>>   
>> bsd.mp       100% |*************************************| 20515 KB    00:02  
>>   
>> bsd.rd       100% |*************************************|  4107 KB    00:01  
>>   
>> comp69.tgz   100% |*************************************| 85958 KB    00:06  
>>   
>> game69.tgz   100% |*************************************|  2741 KB    00:00  
>>   
>> man69.tgz    100% |*************************************|  7560 KB    00:01  
>>   
>> xbase69.tgz  100% |*************************************| 29789 KB    00:03  
>>   
>> xfont69.tgz  100% |*************************************| 39342 KB    00:04  
>>   
>> xserv69.tgz  100% |*************************************| 18351 KB    00:02  
>>   
>> xshare69.tgz 100% |*************************************|  4502 KB    00:01  
>>   
>> Verifying sets.
>> Fetching updated firmware.
>> Upgrading.
>> stopping package daemons: dnsmasq zabbix_agentd.
>> syncing disks... done
>> carp: carp0 demoted group carp by 1 to 1 (carpdev)
>> carp: carp0 demoted group external by 1 to 1 (carpdev)
>> carp: carp0 demoted group externalcarp by 1 to 1 (carpdev)
>> carp: carp0 demoted group egress by 1 to 1 (carpdev)
>> carp: carp1 demoted group carp by 1 to 2 (carpdev)
>> carp: carp1 demoted group internal by 1 to 1 (carpdev)
>> carp: carp2 demoted group carp by 1 to 3 (carpdev)
>> carp: carp2 demoted group yellow by 1 to 1 (carpdev)
>> rebooting...
>> 919     3939
>> 19 99   19³¹)   391919  219993  39
>> 93                                2192921       2199    19219
>> 21939931
>> 919  91921¹þÞWÞ×Þ1BBBÂB"BBBÂBBBRBÂ>> OpenBSD/amd64 BOOT 3.52
>> boot> 
>> booting hd0a:/bsd.upgrade: 3818189+1590272+3878376+0+704512 
>> [109+288+28]=0x989530
>> entry point at 0xffffffff81001000
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>        The Regents of the University of California.  All rights reserved.
>> Copyright (c) 1995-2021 OpenBSD. All rights reserved.  
>> https://www.OpenBSD.org
>> 
>> OpenBSD 6.9 (RAMDISK_CD) #456: Mon Apr 19 10:47:37 MDT 2021
>>    [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>> real mem = 8478871552 (8086MB)
>> avail mem = 8217878528 (7837MB)
>> random: good seed from bootblocks
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecef0 (51 entries)
>> bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
>> bios0: Default string Default string
>> acpi0 at bios0: ACPI 5.0
>> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1680.44 MHz, 06-4c-04
>> cpu0: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,SENSOR,ARAT,MELTDOWN
>> cpu0: 1MB 64b/line 16-way L2 cache
>> cpu0: apic clock running at 79MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (RP01)
>> acpiprt2 at acpi0: bus 2 (RP02)
>> acpiprt3 at acpi0: bus 3 (RP03)
>> acpiprt4 at acpi0: bus 4 (RP04)
>> acpiec0 at acpi0: not present
>> acpicmos0 at acpi0
>> acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
>> "INTCF1C" at acpi0 not configured
>> "PNP0C0E" at acpi0 not configured
>> "PNP0C0B" at acpi0 not configured
>> acpicpu at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpipwrres at acpi0 not configured
>> acpitz at acpi0 not configured
>> cpu0: using Silvermont MDS workaround
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
>> vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
>> wsdisplay1 at vga1 mux 1
>> wsdisplay1: screen 0 added (80x25, vt100 emulation)
>> ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 
>> 1.3.1
>> ahci0: PHY offline on port 0
>> ahci0: port 1: 3.0Gb/s
>> scsibus0 at ahci0: 32 targets
>> sd0 at scsibus0 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> 
>> naa.5000cca532c0fb69
>> sd0: 190782MB, 512 bytes/sector, 390721968 sectors
>> xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 
>> 3.00/1.00 addr 1
>> "Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
>> ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
>> pci1 at ppb0 bus 1
>> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:8f
>> ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
>> pci2 at ppb1 bus 2
>> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:90
>> ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
>> pci3 at ppb2 bus 3
>> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:91
>> ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
>> pci4 at ppb3 bus 4
>> ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
>> pci5 at ppb4 bus 5
>> ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci6 at ppb5 bus 6
>> em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:92
>> ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci7 at ppb6 bus 7
>> em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:93
>> ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci8 at ppb7 bus 8
>> em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:94
>> "Intel Braswell PCU LPC" rev 0x35 at pci0 dev 31 function 0 not configured
>> "Intel Braswell SMBus" rev 0x35 at pci0 dev 31 function 3 not configured
>> isa0 at mainbus0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> softraid0 at root
>> scsibus1 at softraid0: 256 targets
>> root on rd0a swap on rd0b dump on rd0b
>> WARNING: CHECK AND RESET THE DATE!
>> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>> 
>> Welcome to the OpenBSD/amd64 6.9 installation program.
>> Performing non-interactive upgrade...
>> Terminal type? [vt220] vt220
>> Available disks are: sd0.
>> Which disk is the root disk? ('?' for details) [sd0] sd0
>> Checking root filesystem (fsck -fp /dev/sd0a)... OK.
>> Mounting root filesystem (mount -o ro /dev/sd0a /mnt)... OK.
>> Force checking of clean non-root filesystems? [no] no
>> fsck -p 1b53344a3fd48897.e... OK.
>> /dev/sd0a (1b53344a3fd48897.a) on /mnt type ffs (rw, local, wxallowed)
>> /dev/sd0e (1b53344a3fd48897.e) on /mnt/export type ffs (rw, local, nodev, 
>> nosuid)
>> 
>> Let's upgrade the sets!
>> Location of sets? (disk http nfs or 'done') [http] disk
>> Is the disk partition already mounted? [yes] yes
>> Pathname to the sets? (or 'done') [6.9/amd64] /home/_sysupgrade/
>> 
>> Select sets by entering a set name, a file name pattern or 'all'. De-select
>> sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
>>    [X] bsd           [X] base69.tgz    [X] game69.tgz    [X] xfont69.tgz
>>    [X] bsd.mp        [X] comp69.tgz    [X] xbase69.tgz   [X] xserv69.tgz
>>    [X] bsd.rd        [X] man69.tgz     [X] xshare69.tgz
>> Set name(s)? (or 'abort' or 'done') [done] done
>> Directory does not contain SHA256.sig. Continue without verification? [no] 
>> yes
>> Installing bsd          100% |**************************| 20423 KB    00:01  
>>   
>> Installing bsd.mp       100% |**************************| 20515 KB    00:01  
>>   
>> Installing bsd.rd       100% |**************************|  4107 KB    00:00  
>>   
>> Installing base69.tgz   100% |**************************|   291 MB    01:01  
>>   
>> Installing comp69.tgz   100% |**************************| 85958 KB    00:39  
>>   
>> Installing man69.tgz    100% |**************************|  7560 KB    00:13  
>>   
>> Installing game69.tgz   100% |**************************|  2741 KB    00:00  
>>   
>> Installing xbase69.tgz  100% |**************************| 29789 KB    00:10  
>>   
>> Installing xshare69.tgz 100% |**************************|  4502 KB    00:16  
>>   
>> Installing xfont69.tgz  100% |**************************| 39342 KB    00:20  
>>   
>> Installing xserv69.tgz  100% |**************************| 18351 KB    00:03  
>>   
>> Location of sets? (disk http nfs or 'done') [done] done
>> Making all device nodes... done.
>> Multiprocessor machine; using bsd.mp instead of bsd.
>> Relinking to create unique kernel... done.
>> 
>> CONGRATULATIONS! Your Osyncing disks... done
>> rebooting...
>> q21939
>> 4393919 199     91Ù6³6Z299
>> 31239339
>> 9
>> 219i5BBÂB"BBBBÂBB"BBBÂ>> OpenBSD/amd64 BOOT 3.53
>> boot> 
>> booting hd0a:/bsd: 14406952+3220496+344096+0+1175552 
>> [1016190+128+1145856+866050]=0x1528908
>> entry point at 0xffffffff81001000
>> [ using 3029256 bytes of bsd ELF symbol table ]
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>        The Regents of the University of California.  All rights reserved.
>> Copyright (c) 1995-2021 OpenBSD. All rights reserved.  
>> https://www.OpenBSD.org
>> 
>> OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
>>    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 8478871552 (8086MB)
>> avail mem = 8206524416 (7826MB)
>> random: good seed from bootblocks
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecef0 (51 entries)
>> bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
>> bios0: Default string Default string
>> acpi0 at bios0: ACPI 5.0
>> acpi0: sleep states S0 S4 S5
>> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
>> acpi0: wakeup devices BRC1(S0) XHC1(S4) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) 
>> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1680.40 MHz, 06-4c-04
>> cpu0: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu0: 1MB 64b/line 16-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 79MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1679.95 MHz, 06-4c-04
>> cpu1: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu1: 1MB 64b/line 16-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 4 (application processor)
>> cpu2: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.97 MHz, 06-4c-04
>> cpu2: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu2: 1MB 64b/line 16-way L2 cache
>> cpu2: smt 0, core 2, package 0
>> cpu3 at mainbus0: apid 6 (application processor)
>> cpu3: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.96 MHz, 06-4c-04
>> cpu3: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu3: 1MB 64b/line 16-way L2 cache
>> cpu3: smt 0, core 3, package 0
>> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0xe0000000, bus 0-255
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (RP01)
>> acpiprt2 at acpi0: bus 2 (RP02)
>> acpiprt3 at acpi0: bus 3 (RP03)
>> acpiprt4 at acpi0: bus 4 (RP04)
>> acpiec0 at acpi0: not present
>> acpicmos0 at acpi0
>> acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
>> "INTCF1C" at acpi0 not configured
>> acpibtn0 at acpi0: SLPB
>> "PNP0C0B" at acpi0 not configured
>> acpicpu0 at acpi0: C1(@1 halt!), PSS
>> acpicpu1 at acpi0: C1(@1 halt!), PSS
>> acpicpu2 at acpi0: C1(@1 halt!), PSS
>> acpicpu3 at acpi0: C1(@1 halt!), PSS
>> acpipwrres0 at acpi0: ID3C, resource for ISP3
>> acpipwrres1 at acpi0: CLK0, resource for CAMD
>> acpipwrres2 at acpi0: CLK0, resource for CAM1
>> acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3
>> acpipwrres4 at acpi0: USBC, resource for XHC1
>> acpipwrres5 at acpi0: FN00, resource for FAN0
>> acpitz0 at acpi0: critical temperature is 95 degC
>> acpivideo0 at acpi0: GFX0
>> acpivout0 at acpivideo0: DD1F
>> cpu0: using VERW MDS workaround
>> cpu0: Enhanced SpeedStep 1680 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 
>> 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
>> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
>> drm0 at inteldrm0
>> inteldrm0: msi, CHERRYVIEW, gen 8
>> ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 
>> 1.3.1
>> ahci0: PHY offline on port 0
>> ahci0: port 1: 3.0Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> 
>> naa.5000cca532c0fb69
>> sd0: 190782MB, 512 bytes/sector, 390721968 sectors
>> xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 
>> 3.00/1.00 addr 1
>> "Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
>> ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
>> pci1 at ppb0 bus 1
>> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:8f
>> ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
>> pci2 at ppb1 bus 2
>> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:90
>> ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
>> pci3 at ppb2 bus 3
>> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:91
>> ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
>> pci4 at ppb3 bus 4
>> ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
>> pci5 at ppb4 bus 5
>> ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci6 at ppb5 bus 6
>> em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:92
>> ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci7 at ppb6 bus 7
>> em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:93
>> ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci8 at ppb7 bus 8
>> em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:94
>> pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
>> ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 
>> int 18
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
>> isa0 at pcib0
>> isadma0 at isa0
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
>> wsdisplay at vga0 not configured
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
>> wbsio0 port 0x290/2 not configured
>> vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> root on sd0a (1b53344a3fd48897.a) swap on sd0b dump on sd0b
>> inteldrm0: 1024x768, 32bpp
>> wsdisplay0 at inteldrm0 mux 1
>> wsdisplay0: screen 0-5 added (std, vt100 emulation)
>> fd0 at fdc0 drive 0: density unknown
>> Automatic boot in progress: starting file system checks.
>> /dev/sd0a (1b53344a3fd48897.a): file system is clean; not checking
>> /dev/sd0e (1b53344a3fd48897.e): file system is clean; not checking
>> fd1 at fdc0 drive 1: density unknown
>> pf enabled
>> net.inet.ip.forwarding: 0 -> 1
>> net.inet6.ip6.forwarding: 0 -> 1
>> net.inet.carp.preempt: 0 -> 1
>> net.inet.carp.log: 2 -> 6
>> ddb.panic: 1 -> 1
>> ddb.console: 0 -> 1
>> starting network
>> add net 2a00:fe0:30:ffe0::/64: gateway 2001:67c:13b0:ffff::60
>> add net 5.145.142.144/29: gateway 5.145.142.28: Network is unreachable
>> carp: pfsync0 demoted group carp by 32 to 160 (pfsync init)
>> carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
>> carp: pfsync0 demoted group carp by 1 to 161 (pfsync bulk start)
>> carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start)
>> carp: carp0 demoted group carp by 1 to 162 (carpdev)
>> add net 5.145.142.192/26: gatewacarp: carp1 demoted group carp by 1 to 163 
>> (carpdev)
>> y 5.145.142.10
>> carp: carp2 demoted group carp by 1 to 164 (carpdev)
>> reordering libraries:carp0: state transition: INIT -> BACKUP
>> carp: carp0 demoted group carp by -1 to 163 (carpdev)
>> carp: carp0 demoted group external by -1 to 0 (carpdev)
>> carp: carp0 demoted group externalcarp by -1 to 0 (carpdev)
>> carp: carp0 demoted group egress by -1 to 0 (carpdev)
>> carp1: state transition: INIT -> BACKUP
>> carp: carp1 demoted group carp by -1 to 162 (carpdev)
>> carp: carp1 demoted group internal by -1 to 0 (carpdev)
>> carp2: state transition: INIT -> BACKUP
>> carp: carp2 demoted group carp by -1 to 161 (carpdev)
>> carp: carp2 demoted group yellow by -1 to 0 (carpdev)
>> done.
>> starting early daemons: syslogd pflogd ntpd.
>> starting RPC daemons:.
>> savecore: no core dump
>> checking quotas: done.
>> clearing /tmp
>> kern.securelevel: 0 -> 1
>> creating runtime link editor directory cache.
>> preserving editor files.
>> running rc.sysmerge
>> ===> Updating /etc/fbtab
>> ===> Updating /etc/login.conf
>> ===> Updating /etc/ssl/cert.pem
>> ===> Updating /etc/X11/xenodm/GiveConsole
>> ===> Updating /etc/X11/xenodm/TakeConsole
>> ===> Updating /var/unbound/etc/unbound.conf
>> starting network daemons: sshd smtpd sndiod.
>> running rc.firsttime
>> Path to firmware: http://firmware.openbsd.org/firmware/6.9/
>> Updating: intel-firmware-20200616v0 inteldrm-firmware-20200421 
>> vmm-firmware-1.11.0p3
>> http://firmware.openbsd.org/firmware/6.9/: ftp: firmware.openbsd.org: no 
>> address associated with name
>> http://firmware.openbsd.org/firmware/6.9/: empty
>> Couldn't find updates for intel-firmware-20200616v0 
>> inteldrm-firmware-20200421 vmm-firmware-1.11.0p3
>> Checking for available binary patches...
>> syspatch: cdn.openbsd.org: no address associated with name
>> starting package daemons: ${pkg_scripts}(absent) zabbix_agentd dnsmasq.
>> starting local daemons: apmd cron.
>> Sun May 16 11:57:56 CEST 2021
>> 
>> OpenBSD/amd64 (redgatea.red.aixigo.de) (tty00)
>> 
>> login: stopping package daemons: dnsmasq zabbix_agentd.
>> syncing disks... done
>> carp: carp0 demoted group carp by 1 to 1 (carpdev)
>> carp: carp0 demoted group external by 1 to 1 (carpdev)
>> carp: carp0 demoted group externalcarp by 1 to 1 (carpdev)
>> carp: carp0 demoted group egress by 1 to 1 (carpdev)
>> carp: carp1 demoted group carp by 1 to 2 (carpdev)
>> carp: carp1 demoted group internal by 1 to 1 (carpdev)
>> carp: carp2 demoted group carp by 1 to 3 (carpdev)
>> carp: carp2 demoted group yellow by 1 to 1 (carpdev)
>> rebooting...
>> 1921923121919192119     39
>>                                939311219       19219
>> 91                                                   319        39
>>  21
>> ÚBBBBðB"BBBÂBBBBBBÂ>> OpenBSD/amd64 BOOT 3.53
>> boot> 
>> booting hd0a:/bsd: 14411048+3220496+340000+0+1175552 
>> [1018992+128+1145856+866050]=0x15293f8
>> entry point at 0xffffffff81001000
>> [ using 3032056 bytes of bsd ELF symbol table ]
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>        The Regents of the University of California.  All rights reserved.
>> Copyright (c) 1995-2021 OpenBSD. All rights reserved.  
>> https://www.OpenBSD.org
>> 
>> OpenBSD 6.9 (GENERIC.MP) #473: Mon Apr 19 10:40:28 MDT 2021
>>    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 8478871552 (8086MB)
>> avail mem = 8206520320 (7826MB)
>> random: good seed from bootblocks
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xecef0 (51 entries)
>> bios0: vendor American Megatrends Inc. version "5.11" date 04/08/2016
>> bios0: Default string Default string
>> acpi0 at bios0: ACPI 5.0
>> acpi0: sleep states S0 S4 S5
>> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT SSDT UEFI LPIT CSRT
>> acpi0: wakeup devices BRC1(S0) XHC1(S4) HDEF(S4) RP01(S4) PXSX(S4) RP02(S4) 
>> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1600.45 MHz, 06-4c-04
>> cpu0: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu0: 1MB 64b/line 16-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 79MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.95 MHz, 06-4c-04
>> cpu1: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu1: 1MB 64b/line 16-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 4 (application processor)
>> cpu2: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.96 MHz, 06-4c-04
>> cpu2: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu2: 1MB 64b/line 16-way L2 cache
>> cpu2: smt 0, core 2, package 0
>> cpu3 at mainbus0: apid 6 (application processor)
>> cpu3: Intel(R) Celeron(R) CPU N3160 @ 1.60GHz, 1599.96 MHz, 06-4c-04
>> cpu3: 
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
>> cpu3: 1MB 64b/line 16-way L2 cache
>> cpu3: smt 0, core 3, package 0
>> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0xe0000000, bus 0-255
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (RP01)
>> acpiprt2 at acpi0: bus 2 (RP02)
>> acpiprt3 at acpi0: bus 3 (RP03)
>> acpiprt4 at acpi0: bus 4 (RP04)
>> acpiec0 at acpi0: not present
>> acpicmos0 at acpi0
>> acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
>> "INTCF1C" at acpi0 not configured
>> acpibtn0 at acpi0: SLPB
>> "PNP0C0B" at acpi0 not configured
>> acpicpu0 at acpi0: C1(@1 halt!), PSS
>> acpicpu1 at acpi0: C1(@1 halt!), PSS
>> acpicpu2 at acpi0: C1(@1 halt!), PSS
>> acpicpu3 at acpi0: C1(@1 halt!), PSS
>> acpipwrres0 at acpi0: ID3C, resource for ISP3
>> acpipwrres1 at acpi0: CLK0, resource for CAMD
>> acpipwrres2 at acpi0: CLK0, resource for CAM1
>> acpipwrres3 at acpi0: CLK1, resource for CAM2, CAM3
>> acpipwrres4 at acpi0: USBC, resource for XHC1
>> acpipwrres5 at acpi0: FN00, resource for FAN0
>> acpitz0 at acpi0: critical temperature is 95 degC
>> acpivideo0 at acpi0: GFX0
>> acpivout0 at acpivideo0: DD1F
>> cpu0: using VERW MDS workaround
>> cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1601, 1600, 1520, 1440, 1360, 
>> 1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x35
>> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x35
>> drm0 at inteldrm0
>> inteldrm0: msi, CHERRYVIEW, gen 8
>> ahci0 at pci0 dev 19 function 0 "Intel Braswell AHCI" rev 0x35: msi, AHCI 
>> 1.3.1
>> ahci0: PHY offline on port 0
>> ahci0: port 1: 3.0Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 1 lun 0: <ATA, Hitachi HTS54252, BBDO> 
>> naa.5000cca532c0fb69
>> sd0: 190782MB, 512 bytes/sector, 390721968 sectors
>> xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x35: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 
>> 3.00/1.00 addr 1
>> "Intel Braswell TXE" rev 0x35 at pci0 dev 26 function 0 not configured
>> ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x35: msi
>> pci1 at ppb0 bus 1
>> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:8f
>> ppb1 at pci0 dev 28 function 1 "Intel Braswell PCIE" rev 0x35: msi
>> pci2 at ppb1 bus 2
>> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:90
>> ppb2 at pci0 dev 28 function 2 "Intel Braswell PCIE" rev 0x35: msi
>> pci3 at ppb2 bus 3
>> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:91
>> ppb3 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x35: msi
>> pci4 at ppb3 bus 4
>> ppb4 at pci4 dev 0 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05
>> pci5 at ppb4 bus 5
>> ppb5 at pci5 dev 1 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci6 at ppb5 bus 6
>> em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:92
>> ppb6 at pci5 dev 2 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci7 at ppb6 bus 7
>> em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:93
>> ppb7 at pci5 dev 3 function 0 "Pericom PI7C9X2G404EL PCIE" rev 0x05: msi
>> pci8 at ppb7 bus 8
>> em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address 
>> 00:60:e0:66:70:94
>> pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x35
>> ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x35: apic 1 
>> int 18
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
>> isa0 at pcib0
>> isadma0 at isa0
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
>> wsdisplay at vga0 not configured
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
>> wbsio0 port 0x290/2 not configured
>> vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> root on sd0a (1b53344a3fd48897.a) swap on sd0b dump on sd0b
>> uvm_fault(0xffffffff821392c0, 0xb8, 0, 1) -> e
>> kernel: page fault trap, code=0
>> Stopped at      i915_ggtt_pin+0x29:     movq    0xb8(%rdi),%r12
>> ddb{0}> trace
>> i915_ggtt_pin(0,10000,20) at i915_ggtt_pin+0x29
>> gen6_ppgtt_pin(ffff80000061fc00) at gen6_ppgtt_pin+0x7c
>> __intel_context_do_pin(fffffd827ae43d80) at __intel_context_do_pin+0xca
>> intel_engines_init(ffff80000010bc38) at intel_engines_init+0x4b5
>> intel_gt_init(ffff80000010bc38) at intel_gt_init+0x130
>> i915_gem_init(ffff800000107000) at i915_gem_init+0xa3
>> i915_driver_probe(ffff800000107000,ffffffff81fc7810) at 
>> i915_driver_probe+0x7ed
>> 
>> inteldrm_attachhook(ffff800000107000) at inteldrm_attachhook+0x43
>> config_process_deferred_mountroot() at config_process_deferred_mountroot+0x6b
>> main(0) at main+0x733
>> end trace frame: 0x0, count: -10
>> ddb{0}> show registers
>> rdi                                0
>> rsi                          0x10000    __ALIGN_SIZE+0xf000
>> rbp               0xffffffff82530bb0    end+0x130bb0
>> rbx               0xffff800000645340
>> rdx                             0x20
>> rcx               0xffffffff82138924    proc0+0x4
>> rax                                0
>> r8                              0x11
>> r9                0xffffffff820ba450    rw_ops+0x10
>> r10               0xffffffffffffffff
>> r11               0x5d60aabbc1c6285e
>> r12                       0xfffffffc
>> r13                       0xfffffffc
>> r14               0xffff80000061fc00
>> r15                             0x20
>> rip               0xffffffff817c3f89    i915_ggtt_pin+0x29
>> cs                               0x8
>> rflags                       0x10286    __ALIGN_SIZE+0xf286
>> rsp               0xffffffff82530b50    end+0x130b50
>> ss                              0x10
>> i915_ggtt_pin+0x29:     movq    0xb8(%rdi),%r12
> 

Reply via email to