On Sun, June 20, 2021 20:34, Nenhum_de_Nos wrote: > Hi, > > I updated my rpi 3B to 6.9 and after that I got this messages: > > axen0: watchdog timeout > axen0: usb error on tx: IN_PROGRESS > axen0: usb error on tx: TIMEOUT > > and the NIC is offline then. No network access on this nic (I have two > VLAN's there). The built-in NIC is connected to the internet and is fine. > > rpi3_obsd# ping 8.8.8.8 > PING 8.8.8.8 (8.8.8.8): 56 data bytes > 64 bytes from 8.8.8.8: icmp_seq=0 ttl=116 time=66.999 ms > ^C > --- 8.8.8.8 ping statistics --- > 1 packets transmitted, 1 packets received, 0.0% packet loss > round-trip min/avg/max/std-dev = 66.999/66.999/66.999/0.000 ms > > I looked the cvs web and saw no changes on if_axen after 6.8 was released. > This box has 1 day uptime and this is the second time I get this. On 6.8 > this never happened, and I had several days uptime. > > Is this a known bug?
I tried here to ifconfig down and up it, and it got back to work. Will wait till tomorrow if it repeats the behavior. matheus > dmesg: > > rpi3_obsd$ dmesg > OpenBSD 6.9 (GENERIC.MP) #0: Thu May 20 02:29:27 MDT 2021 > > [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP > real mem = 957116416 (912MB) > avail mem = 895270912 (853MB) > random: good seed from bootblocks > mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2 > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: CRC32,ASID16 > cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 > cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu1: 512KB 64b/line 16-way L2 cache > cpu1: CRC32,ASID16 > cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 > cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu2: 512KB 64b/line 16-way L2 cache > cpu2: CRC32,ASID16 > cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 > cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu3: 512KB 64b/line 16-way L2 cache > cpu3: CRC32,ASID16 > efi0 at mainbus0: UEFI 2.8 > efi0: Das U-Boot rev 0x20210100 > apm0 at mainbus0 > simplefb0 at mainbus0: 656x416, 32bpp > wsdisplay0 at simplefb0 mux 1 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > "system" at mainbus0 not configured > "axi" at mainbus0 not configured > simplebus0 at mainbus0: "soc" > bcmclock0 at simplebus0 > bcmmbox0 at simplebus0 > bcmgpio0 at simplebus0 > bcmaux0 at simplebus0 > bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 > bcmintc0 at simplebus0 > bcmrng0 at simplebus0 > pluart0 at simplebus0: console > bcmsdhost0 at simplebus0: 250 MHz base clock > sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-speed, dma > dwctwo0 at simplebus0 > bcmdog0 at simplebus0 > bcmtemp0 at simplebus0 > "local_intc" at simplebus0 not configured > sdhc0 at simplebus0 > sdhc0: SDHC 3.0, 200 MHz base clock > sdmmc1 at sdhc0: 4-bit, sd high-speed, mmc high-speed > simplebus1 at simplebus0: "firmware" > "clocks" at simplebus1 not configured > "expgpio" at simplebus1 not configured > "power" at simplebus0 not configured > "mailbox" at simplebus0 not configured > "gpiomem" at simplebus0 not configured > "fb" at simplebus0 not configured > "vcsm" at simplebus0 not configured > "virtgpio" at simplebus0 not configured > "clocks" at mainbus0 not configured > "phy" at mainbus0 not configured > "arm-pmu" at mainbus0 not configured > agtimer0 at mainbus0: 19200 kHz > "leds" at mainbus0 not configured > "fixedregulator_3v3" at mainbus0 not configured > "fixedregulator_5v0" at mainbus0 not configured > "bootloader" at mainbus0 not configured > usb0 at dwctwo0: USB revision 2.0 > scsibus0 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SB32G, 0080> removable > sd0: 30436MB, 512 bytes/sector, 62333952 sectors > uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC2 root hub" rev > 2.00/1.00 addr 1 > uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems > product 0x9514" rev 2.00/2.00 addr 2 > bwfm0 at sdmmc1 function 1 > manufacturer 0x02d0, product 0xa9a6 at sdmmc1 function 2 not configured > smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems > SMSC9512/14" rev 2.00/2.00 addr 3 > smsc0: address xxxxxx > ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI > 0x0001f0, model 0x000c > axen0 at uhub1 port 5 configuration 1 interface 0 "ASIX Elec. Corp. > AX88179" rev 2.10/1.00 addr 4 > axen0: AX88179, address d8:eb:xx:xx:xx:xx > rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 PHY, rev. 5 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (1143bcaeeb0bb292.a) swap on sd0b dump on sd0b > WARNING: CHECK AND RESET THE DATE! > gpio0 at bcmgpio0: 54 pins > bwfm0: address b8:27:eb:xx:xx:xx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > duplicate IP address 10.1.6.92 sent from ethernet address xxxxxx > axen0: watchdog timeout > axen0: usb error on tx: IN_PROGRESS > axen0: usb error on tx: TIMEOUT > > -- > "We will call you Cygnus, > the God of balance you shall be." > > -- "We will call you Cygnus, the God of balance you shall be."
