Hi Misc, A fresh install of 6.9+syspatch on a 2012-ish Sony Vaio Laptop (VPCS11FG) only physical change pre-install was swapping the 320 hdd with 250 ssd.
It's a vanila install, with 'apmd' enabled + flag '-A' for adaptive/auto cpu-freq. All the other laptop things seem to be working. eg; wifi, suspend. (well the screen brightness controls are not mapped but need to research that) APM itself seems to be doing its thing, however...the output of 'apm' A/C adapter state: is not representive of the physical connection .. and will only show the state that was booted. Removing the A/C does not change state.. (but battery % does correctly come down over time). Restarting APMD does not change state. if rebooted on battery only, apm state = 'not connected' but when power is re-connected, and battery commences charge, yet the state remains "not connected" - a bit weird. Being an older laptop, there is a physical led that illuminates correctly when the A/C is connected. Checking in debug mode "# apmd -d" yields an ioctl error. (below) In summary, the plug state is not being realised by apmd. i cant see any events in /var/log/messages, or ../daemon log below are outputs of uname -a sysctl hw apm apm -d appreciate any feeback or guidance. thanks in advance. ............. vaio$ uname -a OpenBSD vaio.local 6.9 GENERIC.MP#4 amd64 vaio$ sysctl hw hw.machine=amd64 hw.model=Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz hw.ncpu=4 hw.byteorder=1234 hw.pagesize=4096 hw.disknames=sd0:8e9a4a21ca42676c,cd0: hw.diskcount=2 hw.sensors.cpu0.temp0=46.00 degC hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=3.81 VDC (current voltage) hw.sensors.acpibat0.power0=14.95 W (rate) hw.sensors.acpibat0.watthour0=42.51 Wh (last full capacity) hw.sensors.acpibat0.watthour1=0.40 Wh (warning capacity) hw.sensors.acpibat0.watthour2=0.38 Wh (low capacity) hw.sensors.acpibat0.watthour3=36.90 Wh (remaining capacity), OK hw.sensors.acpibat0.watthour4=57.24 Wh (design capacity) hw.sensors.acpibat0.raw0=2 (battery charging), OK hw.sensors.acpiac0.indicator0=Off (power supply) hw.sensors.acpibtn1.indicator0=On (lid open) hw.sensors.acpitz0.temp0=47.00 degC (zone temperature) hw.sensors.acpidock0.indicator0=Off (not docked), UNKNOWN hw.sensors.itherm0.temp1=47.00 degC (Core 1) hw.sensors.itherm0.temp4=49.00 degC (CPU/GPU Max temp) hw.sensors.itherm0.temp9=49.00 degC (GPU/Memory controller abs.) hw.sensors.itherm0.temp10=59.00 degC (PCH abs.) hw.sensors.itherm0.power0=8.00 W (CPU power consumption) hw.cpuspeed=933 hw.setperf=0 hw.vendor=Sony Corporation hw.product=VPCS113FG hw.version=C1043B81 hw.serialno=<<MYSECRET>> hw.uuid=407add24-c1dd-de11-<<MYSECRET>> hw.physmem=3932688384 hw.usermem=3919343616 hw.ncpufound=4 hw.allowpowerdown=1 hw.perfpolicy=auto hw.smt=0 hw.ncpuonline=2 vaio$ apm Battery state: high, 86% remaining, 147 minutes life estimate A/C adapter state: not connected Performance adjustment mode: manual (933 MHz) vaio$ doas apmd -d battery status: high. external power status: not connected. estimated battery life 87% (149 minutes) can't disable driver messages, error: Inappropriate ioctl for device apmevent 0000 index 0 apmevent 0006 index 53 apmevent 0006 index 54 apmevent 0006 index 55 apmevent 0006 index 56 apmevent 0006 index 57 apmevent 0006 index 58 .... .... thanks for looking -SUB
