Hi,
The release versions of both cd70.iso and install70.iso will not ( at least
for me ) boot my sparc machines. The files from snapshot will boot these
machines! Please see the two machines reports below.
Now I have tried to use a snapshot cd70 boot to install from stable but so
far I have been unable to do this. The snapshot installs fine but of course
uses the files sets from the snapshot directory.
On a working 7.0 snapshot install...
I tried to install the Yubikey tools from packages and also build from
ports. Both failed with some problem with a python conflict. I would like
to be able to install the release ( stable ) version of OpenBSD sparc64 and
build the ports. Any help would be most appreciated. I have posted
regarding the inability to boot sparc from release ( stable ) previously
but have had no replies.
Any help?
Keep safe, kind regards John.
Sun Fire V100
===========
ok boot cdrom
Resetti
LOM event: +1h42m22s host reset
ng ...
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing upa at 1f,0 pci
Probing upa at 0,0 SUNW,UltraSPARC-IIe (512 Kb)
Loading Support Packages: kbd-translator
Loading onboard drivers:
Probing /pci@1f,0 Device 7 isa dma rtc power SUNW,lomh serial serial
flashprom
Probing /pci@1f,0 Device 3 pmu i2c temperature dimm dimm dimm dimm
i2c-nvram idprom motherboard-fru ppm beep fan-control
lomp
Probing Memory Bank #0 512 Megabytes
Probing Memory Bank #1 512 Megabytes
Probing Memory Bank #2 512 Megabytes
Probing Memory Bank #3 512 Megabytes
Probing /pci@1f,0 Device 7
Probing /pci@1f,0 Device 3
Probing /pci@1f,0 Device c ethernet
Probing /pci@1f,0 Device 5 ethernet
Probing /pci@1f,0 Device a usb
Probing /pci@1f,0 Device d ide disk cdrom
todm5819 Sun Fire V100 (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 2048 MB memory installed, Serial #56397165.
Ethernet address 0:3:ba:5c:8d:6d, Host ID: 835c8d6d.
Environment monitoring: disabled
Executing last command: boot cdrom
Boot device: /pci@1f,0/ide@d/cdrom@3,0:f File and args:
OpenBSD IEEE 1275 Bootblock 2.1
..>> OpenBSD BOOT 1.21
Trying bsd...
Booting /pci@1f,0/ide@d/cdrom@3,0:f/bsd
4102856@0x1000000+1336@0x13e9ac8+3247500@0x1c00000+946804@0x1f18d8c
OF_map_phys(dfdfc000,8192,fff5a000,-1) failed
no space for symbol table
Program terminated
ok
Sun T5120
=========
Oracle(R) Integrated Lights Out Manager
Version 3.0.12.9 r117324
Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved.
sc> console
Enter #. to return to ALOM.
{0} ok boot cdrom
SPARC Enterprise T5120, No Keyboard
Copyright (c) 1998, 2017, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.33.6.h, 16256 MB memory available, Serial #85158202.
Ethernet address 0:21:28:13:69:3a, Host ID: 8513693a.
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0:f
File and args:
OpenBSD IEEE 1275 Bootblock 2.1
..>> OpenBSD BOOT 1.21
ERROR: /iscsi-hba: No iscsi-network-bootpath property
Trying bsd...
Booting /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0
,0:f/bsd
4102856@0x1000000+1336@0x13e9ac8+3247500@0x1c00000+946804@0x1f18d8c
OF_map_phys(ffc6e000,8192,fecea000,-1) failed
no space for symbol table
Program terminated
{0} ok
