Updated BIOS to the latest version for this server - P58 (08/16/2015). All
the same. Tried changing the parameter MPS Table Mode in BIOS (the option
was set to Disabled), after setting the value to Full Table APIC, dmesg
changed, but the cores still did not appear:
OpenBSD 7.0 (GENERIC) #224: Thu Sep 30 14:13:34 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4276367360 (4078MB)
avail mem = 4130840576 (3939MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xee000 (69 entries)
bios0: vendor HP version "P58" date 08/16/2015
bios0: HP ProLiant DL360 G5
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG HPET SPMI ERST APIC FFFF BERT HEST SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz, 2667.15 MHz, 06-17-06
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 333MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (IP2P)
acpiprt2 at acpi0: bus 9 (PT02)
acpiprt3 at acpi0: bus 10 (IPE4)
acpiprt4 at acpi0: bus 11 (IPE1)
acpiprt5 at acpi0: bus 16 (P2P2)
acpiprt6 at acpi0: bus 6 (PT03)
acpiprt7 at acpi0: bus 19 (PT04)
acpiprt8 at acpi0: bus 3 (NB01)
acpiprt9 at acpi0: bus 5 (NB02)
acpipci0 at acpi0 PCI0
"IPI0001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
acpicpu0 at acpi0: C1(1000@1 halt)
acpitz0 at acpi0: critical temperature is 31 degC
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 14
ppb4 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 15
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 16
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 6
ciss0 at pci7 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x03: apic
8 int 16
ciss0: 1 LD, HW rev 3, FW 6.86/6.86, 64bit fifo
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.86>
sd0: 69973MB, 512 bytes/sector, 143305920 sectors
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci8 at ppb7 bus 19
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 22
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
pci10 at ppb9 bus 2
ppb10 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci11 at ppb10 bus 3
bnx0 at pci11 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 18
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 4
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 5
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 19
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 16
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 17
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8 int 19
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 1
radeondrm0 at pci14 dev 3 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 8 int 23
"Compaq iLO" rev 0x03 at pci14 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci14 dev 4 function 2 not configured
uhci4 at pci14 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 8 int
22
"Hewlett-Packard IPMI" rev 0x00 at pci14 dev 4 function 6 not configured
usb1 at uhci4: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Hewlett-Packard UHCI root hub"
rev 1.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX (using slow L1TF mitigation)
dt: 445 probes
uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard"
rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard"
rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (fa871ac66d86823a.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
bnx0: address 00:1f:29:6a:6d:2c
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:1f:29:6a:6d:24
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
radeondrm0: RV100
radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
[drm] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1024x768, 16bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Bogus possible_clones: [ENCODER:43:DAC-43] possible_clones=0x2 (full
encoder mask=0x3)
Bogus possible_clones: [ENCODER:45:TV-45] possible_clones=0x1 (full encoder
mask=0x3)
I will send a bug report.
чт, 18 нояб. 2021 г. в 13:16, Stuart Henderson <[email protected]>:
> On 2021/11/18 12:58, Dev Op wrote:
> > When upgrading OpenBSD 7.0/amd64, unfortunately, there is no bsd.mp
> among the presented set of
> > files. Why? :( Although, it is in the image. EM64T (Intel 64) is
> definitely supported by Intel
> > (R) Xeon(R) CPU E5430. There was nothing strange when installing the
> distribution kit. I
> > downloaded install70.iso from https://ftp.yandex.ru/openbsd/7.0/amd64/
> and installed the
> > proposed set of files. Everything is as usual.
> >
> > Server is HP Proliant DL360G5 with one CPU E5430 (4-cores) on it. BIOS
> was checked: "All
> > processor Cores Enabled".
>
> It looks like the acpicpu table provided by the machine firmware/bios
> is not reporting all cores.
>
> Suggest updating firmware (the newest for the machine seems to be
>
> https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_75580f5b91784d11b58f80d961
> )
> Certainly older versions on this machine didn't support quad core cpus.
>
> If it still only reports a single core after updating, use sendbug,
> run as root to include a copy of acpi tables. If mail isn't fully
> configured on the machine then it is usually simplest to use
> "sendbug -P > somefile" and copy that to another machine and
> send it with a normal mail client to [email protected].
>
> > Here is full dmesg:
> > OpenBSD 7.0 (GENERIC) #224: Thu Sep 30 14:13:34 MDT 2021
> > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
> > real mem = 4276432896 (4078MB)
> > avail mem = 4130902016 (3939MB)
> > random: good seed from bootblocks
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xee000 (68 entries)
> > bios0: vendor HP version "P58" date 07/10/2009
> > bios0: HP ProLiant DL360 G5
> > acpi0 at bios0: ACPI 3.0
> > acpi0: sleep states S0 S4 S5
> > acpi0: tables DSDT FACP SPCR MCFG HPET SPMI ERST FFFF FFFF BERT HEST SSDT
> > acpi0: wakeup devices PCI0(S5)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xe0000000, bus 0-255
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (IP2P)
> > acpiprt2 at acpi0: bus 9 (PT02)
> > acpiprt3 at acpi0: bus 10 (IPE4)
> > acpiprt4 at acpi0: bus 11 (IPE1)
> > acpiprt5 at acpi0: bus 16 (P2P2)
> > acpiprt6 at acpi0: bus 6 (PT03)
> > acpiprt7 at acpi0: bus 19 (PT04)
> > acpiprt8 at acpi0: bus 3 (NB01)
> > acpiprt9 at acpi0: bus 5 (NB02)
> > acpipci0 at acpi0 PCI0
> > "IPI0001" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > acpicpu0 at acpi0: C1(1000@1 halt)
> > acpitz0 at acpi0: critical temperature is 31 degC
> > ipmi at mainbus0 not configured
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz, 2667.12 MHz, 06-17-06
> > cpu0:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > cpu0: 6MB 64b/line 16-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
> > ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
> > pci1 at ppb0 bus 9
> > ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> > pci2 at ppb1 bus 10
> > ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> > pci3 at ppb2 bus 11
> > ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
> > pci4 at ppb3 bus 14
> > ppb4 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
> > pci5 at ppb4 bus 15
> > ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> > pci6 at ppb5 bus 16
> > ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
> > pci7 at ppb6 bus 6
> > ciss0 at pci7 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x03:
> irq 5
> > ciss0: 1 LD, HW rev 3, FW 6.86/6.86, 64bit fifo
> > scsibus1 at ciss0: 1 targets
> > sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.86>
> > sd0: 69973MB, 512 bytes/sector, 143305920 sectors
> > ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0xb1
> > pci8 at ppb7 bus 19
> > ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
> > pci9 at ppb8 bus 22
> > ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0xb1
> > pci10 at ppb9 bus 2
> > ppb10 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> > pci11 at ppb10 bus 3
> > bnx0 at pci11 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
> > ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
> > pci12 at ppb11 bus 4
> > ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> > pci13 at ppb12 bus 5
> > bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
> > pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
> > pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
> > pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
> > pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
> > pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
> > pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
> > pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
> > uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
> > uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
> > uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
> > uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
> > ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> > ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
> > pci14 at ppb13 bus 1
> > radeondrm0 at pci14 dev 3 function 0 "ATI ES1000" rev 0x02
> > drm0 at radeondrm0
> > radeondrm0: irq 7
> > "Compaq iLO" rev 0x03 at pci14 dev 4 function 0 not configured
> > "Compaq iLO" rev 0x03 at pci14 dev 4 function 2 not configured
> > uhci4 at pci14 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
> > "Hewlett-Packard IPMI" rev 0x00 at pci14 dev 4 function 6 not configured
> > usb1 at uhci4: USB revision 1.0
> > uhub1 at usb1 configuration 1 interface 0 "Hewlett-Packard UHCI root
> hub" rev 1.00/1.00 addr 1
> > pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
> > pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
> channel 0 configured to
> > compatibility, channel 1 configured to compatibility
> > pciide0: channel 0 disabled (no drives)
> > pciide0: channel 1 disabled (no drives)
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
> 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
> 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
> 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
> 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > com1: probed fifo depth: 0 bytes
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> > dt: 445 probes
> > uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> > wskbd1 at ukbd0 mux 1
> > uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual
> Keyboard" rev 1.10/0.02 addr 2
> > uhidev1: iclass 3/1
> > ums0 at uhidev1: 3 buttons
> > wsmouse0 at ums0 mux 0
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (fa871ac66d86823a.a) swap on sd0b dump on sd0b
> > bnx0: address 00:1f:29:6a:6d:2c
> > brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> > bnx1: address 00:1f:29:6a:6d:24
> > brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> > radeondrm0: RV100
> > radeon_cp: Failed to load firmware "radeon/R100_cp.bin"
> > [drm] *ERROR* Failed to load firmware!
> > drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
> > drm:pid0:r100_init *ERROR* Disabling GPU acceleration
> > radeondrm0: 1024x768, 16bpp
> > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
> wskbd0
> > wskbd1: connecting to wsdisplay0
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > Bogus possible_clones: [ENCODER:43:DAC-43] possible_clones=0x2 (full
> encoder mask=0x3)
> > Bogus possible_clones: [ENCODER:45:TV-45] possible_clones=0x1 (full
> encoder mask=0x3)
> >
> >
> >
> > ср, 17 нояб. 2021 г. в 14:47, Stuart Henderson <
> [email protected]>:
> >
> > On 2021-11-17, Dev Op <[email protected]> wrote:
> > > Hi all!
> > >
> > > I was dealing with one router and faced with the fact that I did
> not see
> > > hypertrading after installing OpenBSD 7.0. I came across an email
> > >
> https://www.mail-archive.com/[email protected]/msg99141.html,
> > > where I read hypertrading was disabled for Intel processors
> running on
> > > OpenBSD/amd64 and that it can be enabled via hw.smt. I did so, but
> I don't
> > > see it making a difference. How do you make sure it's on and used?
> >
> > It doesn't usually produce much benefit in OpenBSD, sometimes it
> actually
> > slows things down.
> >
> > You can see if it is working because top will show processes spread
> across
> > the HT "cpus" (which aren't really CPU cores but share resources).
> i.e.
> > twice as many as the number of real CPUs on the system.
> >
> > Also there's a reason why it was disabled by default!
> >
> > > OpenBSD router1 7.0 GENERIC#224 amd64
> >
> > For some reason you are running a uniprocessor kernel. If this was on
> > purpose then it's totally expected that you see only one cpu. If
> not: did
> > you install in a strange way?
> >
> > I would run the installer again and do an "upgrade" to 7.0 and make
> sure
> > bsd.mp is installed.
> >
> > > dmesg.boot is here: https://pastebin.com/G24A7Jbw
> >
> > This is not irc, there is no need for pastebin in a mailing list :)
> >
> > > Before updating the router, I noticed that it worked without
> hypertrading
> > > on OpenBSD 6.7/amd64 with a good load:
> > >
> > > ->% uptime
> > > 11:03 AM up 209 days, 4:25, 3 users, load averages: 3.40, 3.17,
> 3.02
> > >
> > > I didn’t see which process was eating the CPU in htop, but the
> average load
> > > was scary. Suggested that HT disabled might be the cause, so I
> decided to
> > > update the OS and enable HT.
> >
> > Load isn't a clear indication of cpu use, this doesn't necessarily
> show that
> > something is wrong. Nothing scary about theae values.
> >
> > --
> > Please keep replies on the mailing list.
> >
> >
> >
> >
> > --
> > Regards,
> > Den
> >
>
--
Regards,
Den
