On 3/9/06, Gustavo Rios <[EMAIL PROTECTED]> wrote: > Ok! Sorry, here is my dmesg: > > console is keyboard/display > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 3.8 (GENERIC) #607: Sat Sep 10 16:03:59 MDT 2005 > [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC > total memory = 67108864 > avail memory = 48103424 > using 409 buffers containing 3350528 bytes of memory > bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],8400000/[EMAIL > PROTECTED],8800000/[EMAIL PROTECTED],0 > mainbus0 (root): Sun Ultra 1 SBus (UltraSPARC 167MHz) > cpu0 at mainbus0: SUNW,UltraSPARC @ 167 MHz, version 0 FPU > cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K > external (64 b/l) > timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1 > sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz > STC0 on /mainbus enabled > DVMA map: ff800000 to ffffe000 > IOTDB: 7ec000 to 7ee000 > audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8 > audio0 at audiocs0 > auxio0 at sbus0 slot 15 offset 0x1900000 > flashprom at sbus0 slot 15 offset 0x0 not configured > fdc0 at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 softpri 4 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > clock1 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 808f6eda > zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6 > zstty0 at zs0 channel 0 > zstty1 at zs0 channel 1 > zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6 > zskbd0 at zs1 channel 0: layout 33 > wskbd0 at zskbd0: console keyboard > zstty2 at zs1 channel 1: mouse > uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-up (0/0) ports 3 > SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured > dma0 at sbus0 slot 14 offset 0x8400000: dma rev 2 > esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz, SCSI ID > 7 > scsibus0 at esp0: 8 targets > sd0 at scsibus0 targ 0 lun 0: <IBM, DCAS32160SUN2.1G, S65A> SCSI2 0/direct > fixed > sd0: 2063MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sec, 4226725 sec total > cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM5701TASUN12XCD, 0997> SCSI2 > 5/cdrom removable > ledma0 at sbus0 slot 14 offset 0x8400010: dma rev 2 > le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address > 08:00:20:8f:6e:da > le0: 8 receive buffers, 2 transmit buffers > SUNW,bpp at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2 not configured > cgsix0 at sbus0 slot 2 offset 0x0 vector 5 ipl 5: SUNW,501-2325, > 1152x900, rev 11 > wsdisplay0 at cgsix0: console (std, sun emulation), using wskbd0 > pcons at mainbus0 not configured > root on sd0a > rootdev=0x700 rrootdev=0x1100 rawdev=0x1102 > syncing disks... > console is keyboard/display > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > > This is my desktop. The remote unit have neither video board nor keyboard. > > Here is what i am trying on my local system: > > # tip -v -19200 ttya > connected > > > As you may see, not is shown when i turn on the remote box. > > Once more, thanks for your time and cooperation. > > /best regards. > > 2006/3/9, Diana Eichert <[EMAIL PROTECTED]>: > > don't send attachments to the list, they get removed. > >
I have a Sun Ultra 2 Enterprise that I connect to serially by cu -l tty00 At first I had problems because I was not connected to the right serial port. Also make sure you are using a null modem cable. rogern John 3:16
