I'm attempting to install and run rspamd on -current, and running into problems. Is anyone running it successfully?
According to the pkg-readme it should be ready to go out of the box but it uses gobs of CPU then dies after a minute or three. batteen# rcctl start rspamd rspamd (timeout) full log available at https://batteen.com/rspamd.log.1.txt but what I believe is the relevant part follows: 2022-01-06 13:16:10 #55765(main) rspamd_inet_address_listen: bind 74.125.224.72:11332 failed: 49, 'Can't assign requested address' 2022-01-06 13:16:10 #55765(main) <b3bfa9>; main; spawn_workers: cannot listen on normal socket localhost:11332: Can't assign requested address 2022-01-06 13:16:10 #55765(main) <b3bfa9>; main; spawn_workers: cannot create listen socket for rspamd_proxy at localhost:11332 2022-01-06 13:16:10 #55765(main) <b3bfa9>; main; rspamd_hard_terminate: shutting down Rspamd due to fatal error I have no idea where the IP address 74.125.224.72 is even coming from, I can find no reference to it in any of the config files. Replacing all instances of "localhost" with "127.0.0.1" in /etc/rspamd/rspamd.conf results in a "successfully" running rspamd, but it still doesn't do anything. Every attempted operation results in an IO timeout. The log is at https://batteen.com/rspamd.log.2.txt batteen# rcctl start rspamd rspamd(ok) batteen# rspamc stat Results for command: stat (10.000 seconds) IO timeout dmesg: OpenBSD 7.0-current (GENERIC.MP) #225: Wed Jan 5 16:45:07 MST 2022 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3914948608 (3733MB) avail mem = 3780284416 (3605MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xed450 (18 entries) bios0: vendor American Megatrends Inc. version "P1.40" date 07/14/2017 bios0: ASRock J3455-ITX acpi0 at bios0: ACPI 6.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT PRAM WSMT SSDT SSDT AAFT SSDT SSDT SSDT SSDT SSDT UEFI WDAT NHLT acpi0: wakeup devices SIO1(S3) PS2K(S4) UAR1(S4) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 19200000 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.55 MHz, 06-5c-09 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu0: 1MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 19MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.55 MHz, 06-5c-09 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu1: 1MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.56 MHz, 06-5c-09 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu2: 1MB 64b/line 16-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.56 MHz, 06-5c-09 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN cpu3: 1MB 64b/line 16-way L2 cache cpu3: smt 0, core 3, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP03) acpiprt2 at acpi0: bus 2 (RP04) acpiprt3 at acpi0: bus 3 (RP05) acpiprt4 at acpi0: bus 4 (RP06) acpiec0 at acpi0: not present acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB aplgpio0 at acpi0 GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins aplgpio1 at acpi0 GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins aplgpio2 at acpi0 GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins aplgpio3 at acpi0 GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins "INT33A1" at acpi0 not configured "PNP0C0B" at acpi0 not configured acpicpu0 at acpi0: C1(@1 halt!), PSS acpicpu1 at acpi0: C1(@1 halt!), PSS acpicpu2 at acpi0: C1(@1 halt!), PSS acpicpu3 at acpi0: C1(@1 halt!), PSS acpipwrres0 at acpi0: FN00, resource for FAN0 acpitz0 at acpi0: critical temperature is 100 degC acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1496 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b drm0 at inteldrm0 inteldrm0: msi, BROXTON, gen 9 azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi azalia0: codecs: Realtek ALC892, Intel/0x280a, using Realtek ALC892 audio0 at azalia0 "Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi, AHCI 1.3.1 ahci0: port 0: 6.0Gb/s ahci0: port 1: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ADATA SU630, V8X1> naa.0000000000000000 sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin sd1 at scsibus1 targ 1 lun 0: <ATA, ST2000DM001-1ER1, CC26> naa.5000c50092eb832c sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x11: RTL8168G/8111G (0x4c00), msi, address 70:85:c2:3c:16:03 rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 ppb1 at pci0 dev 19 function 1 "Intel Apollo Lake PCIE" rev 0xfb: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 19 function 2 "Intel Apollo Lake PCIE" rev 0xfb: msi pci3 at ppb2 bus 3 ahci1 at pci3 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x02: msi, AHCI 1.2 scsibus2 at ahci1: 32 targets ppb3 at pci0 dev 19 function 3 "Intel Apollo Lake PCIE" rev 0xfb: msi pci4 at ppb3 bus 4 re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400), msi, address d8:07:b6:54:d7:98 rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b: polling iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 vmm0 at mainbus0: VMX/EPT vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (541e99fcc8ff76c1.a) swap on sd0b dump on sd0b drm:pid0:rc6_supported *NOTICE* [drm] RC6 and powersaving disabled by BIOS inteldrm0: 1280x1024, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)
