On Tue, Jan 25, 2022 at 08:16:43PM +0100, Joel Carnat wrote: > Le 25/01/2022 à 01:32, Jonathan Gray a écrit : > > On Tue, Jan 25, 2022 at 01:08:16AM +0100, Joel Carnat wrote: > > > Hello, > > > > > > Because my Internet Box has just died, I plugged a spare Edimax EW-7612UAN > > > V2 on my OpenBSD 7.0 router and connected it to my iPhone WiFi connection > > > sharing. I've tested it for a few hours with Video-on-Demand, email etc > > > and > > > it works without issues. > > > > > > The thing is it seems to be recognized as a generic Realtek device: > > > > > > # dmesg > > > (...) > > > urtwn0 at uhub0 port 4 configuration 1 interface 0 "Realtek 802.11n WLAN > > > Adapter" rev 2.00/2.00 addr 2 > > > urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address 08:be:ac:1d:40:96 > > > > > > # usbdevs -v > > > (...) > > > addr 02: 7392:7822 Realtek, 802.11n WLAN Adapter > > > high speed, power 500 mA, config 1, rev 2.00, iSerial > > > 00e04c000001 > > > driver: urtwn0 > > > > > > It is also not referenced in the man page as a supported device. > > > > > > In src/sys/dev/usb/usbdevs, on line 1722, I could can find > > > product EDIMAX RTL8192CU 0x7822 RTL8192CU > > > but I have no real clue about what to modify and propose a diff. Sorry. > > > > for usb, strings from the device are preferred with usbdevs as fallback > > see usbd_cache_devinfo() in sys/dev/usb/usb_subr.c > > > > Hum, ok. Does this means that particular device does not announce itself > with the proper brand/model but with a generic identifier?
Yes, likely those strings are the defaults from Realtek.
