OMG, thank you so much Jonathan, it worked! I did not think about missing access to PCI.
Do you maybe also know how to enable Chromium hardware acceleration on my hardware? пт, 4 февр. 2022 г. в 02:36, Jonathan Gray <[email protected]>: > > On Thu, Feb 03, 2022 at 07:59:44PM +0300, Sergey Andrianov wrote: > > Hello, I've recently found some old Atom-based netbook in a "trash" > > box in my friend's house. HDD was dead, so I've replaced it with > > Kingston SSD and installed OpenBSD 7. I've installed Xorg, but I can't > > manage to start it. > > > > According to the specs of this netbook, the graphics card is Intel GMA > > 3150. But I did not find any solution for this particular adapter for > > OpenBSD. > > xf86-video-intel needs to scan the pci bus, you need to use > xenodm not startx on this hardware > > we stopped installing the xserver setuid in 2018 > > > > > Here are dmesg and logs: > > > > OpenBSD 7.0 (GENERIC.MP) #232: Thu Sep 30 14:25:29 MDT 2021 > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 2119892992 (2021MB) > > avail mem = 2039676928 (1945MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdf010 (29 entries) > > bios0: vendor Phoenix Technologies Ltd. version > > "02FR.M025.20110711.RHU" date 07/11/2011 > > bios0: SAMSUNG ELECTRONICS CO., LTD. NC215S > > acpi0 at bios0: ACPI 3.0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP MCFG HPET APIC BOOT SLIC SSDT SSDT SSDT SSDT SSDT > > acpi0: wakeup devices EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCIB(S3) PWRB(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xe0000000, bus 0-16 > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 4821.60 MHz, 06-1c-0a > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > > cpu0: 512KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > > cpu0: apic clock running at 166MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 997.51 MHz, 06-1c-0a > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > > cpu1: 512KB 64b/line 8-way L2 cache > > cpu1: disabling user TSC (skew=345) > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 1 (application processor) > > cpu2: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 1662.51 MHz, 06-1c-0a > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > > cpu2: 512KB 64b/line 8-way L2 cache > > cpu2: smt 1, core 0, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Atom(TM) CPU N570 @ 1.66GHz, 997.51 MHz, 06-1c-0a > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN > > cpu3: 512KB 64b/line 8-way L2 cache > > cpu3: disabling user TSC (skew=300) > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 5 (EXP1) > > acpiprt2 at acpi0: bus 7 (EXP2) > > acpiprt3 at acpi0: bus 9 (EXP3) > > acpiprt4 at acpi0: bus 11 (EXP4) > > acpiprt5 at acpi0: bus 17 (PCIB) > > acpiec0 at acpi0 > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics" > > acpicmos0 at acpi0 > > acpiac0 at acpi0: AC unit online > > acpibtn0 at acpi0: LID0 > > acpibtn1 at acpi0: PWRB > > acpibtn2 at acpi0: SLPB > > acpicpu0 at acpi0: C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C1(1000@1 mwait.1), PSS > > acpitz0 at acpi0: critical temperature is 98 degC > > acpivideo0 at acpi0: IGD0 > > acpivout0 at acpivideo0: DD04 > > cpu0: Enhanced SpeedStep 4821 MHz: speeds: 1667, 1333, 1000 MHz > > pci0 at mainbus0 bus 0 > > 0:29:7: mem address conflict 0xf0504000/0x400 > > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > > inteldrm0 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 > > drm0 at inteldrm0 > > intagp0 at inteldrm0 > > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > > inteldrm0: apic 4 int 16, PINEVIEW, gen 3 > > "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured > > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > > azalia0: codecs: Realtek ALC269 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > > pci1 at ppb0 bus 5 > > iwn0 at pci1 dev 0 function 0 "Intel Centrino Wireless-N 130" rev > > 0x34: msi, MIMO 1T2R, BGN, address dc:a9:71:6f:73:3b > > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi > > pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi > > pci3 at ppb2 bus 9 > > re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E > > (0x4080), msi, address e8:11:32:d5:70:70 > > rlphy0 at re0 phy 7: RTL8201E 10/100 PHY, rev. 2 > > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi > > pci4 at ppb3 bus 11 > > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23 > > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19 > > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 > > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > > pci5 at ppb4 bus 17 > > pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 > > pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide0: using apic 4 int 19 for native-PCI interrupt > > wd0 at pciide0 channel 0 drive 0: <KINGSTON SA400S37240G> > > wd0: 1-sector PIO, LBA48, 228936MB, 468862128 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 > > int 19 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > usb4 at uhci3: USB revision 1.0 > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > pms0: Synaptics touchpad, firmware 7.5, 0x1c0b1 0x240000 0x18d440 > > 0xd00033 0xa0400 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > dt: 445 probes > > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Image Processor > > WebCam SC-0311139N" rev 2.00/0.15 addr 2 > > video0 at uvideo0 > > ugen0 at uhub2 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 2 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > root on wd0a (20fda980cc0ee0ac.a) swap on wd0b dump on wd0b > > inteldrm0: 1024x600, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > Xorg.0.log if I provide no xorg.conf: > > > > [ 1833.640] > > X.Org X Server 1.20.13 > > X Protocol Version 11, Revision 0 > > [ 1833.640] Build Operating System: OpenBSD 7.0 amd64 > > [ 1833.641] Current Operating System: OpenBSD tel-branora.my.domain > > 7.0 GENERIC.MP#232 amd64 > > [ 1833.642] Build Date: 30 September 2021 02:52:51PM > > [ 1833.642] > > [ 1833.642] Current version of pixman: 0.40.0 > > [ 1833.643] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 1833.643] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 1833.645] (==) Log file: > > "/home/caius/.local/share/xorg/Xorg.0.log", Time: Thu Feb 3 19:24:11 > > 2022 > > [ 1833.647] (==) Using system config directory > > "/usr/X11R6/share/X11/xorg.conf.d" > > [ 1833.649] (==) No Layout section. Using the first Screen section. > > [ 1833.649] (==) No screen section available. Using defaults. > > [ 1833.649] (**) |-->Screen "Default Screen Section" (0) > > [ 1833.649] (**) | |-->Monitor "<default monitor>" > > [ 1833.650] (==) No monitor specified for screen "Default Screen Section". > > Using a default monitor configuration. > > [ 1833.651] (==) Automatically adding devices > > [ 1833.651] (==) Automatically enabling devices > > [ 1833.651] (==) Not automatically adding GPU devices > > [ 1833.651] (==) Max clients allowed: 256, resource mask: 0x1fffff > > [ 1833.651] (==) FontPath set to: > > /usr/X11R6/lib/X11/fonts/misc/, > > /usr/X11R6/lib/X11/fonts/TTF/, > > /usr/X11R6/lib/X11/fonts/OTF/, > > /usr/X11R6/lib/X11/fonts/Type1/, > > /usr/X11R6/lib/X11/fonts/100dpi/, > > /usr/X11R6/lib/X11/fonts/75dpi/ > > [ 1833.652] (==) ModulePath set to "/usr/X11R6/lib/modules" > > [ 1833.652] (II) The server relies on wscons to provide the list of > > input devices. > > If no devices become available, reconfigure wscons or disable > > AutoAddDevices. > > [ 1833.652] (II) Loader magic: 0x25efabeceb0 > > [ 1833.652] (II) Module ABI versions: > > [ 1833.652] X.Org ANSI C Emulation: 0.4 > > [ 1833.652] X.Org Video Driver: 24.1 > > [ 1833.652] X.Org XInput driver : 24.1 > > [ 1833.652] X.Org Server Extension : 10.0 > > [ 1833.653] (--) Using wscons driver on /dev/ttyC4 > > [ 1833.671] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > > (Permission denied) > > Check that you have set 'machdep.allowaperture=1' > > in /etc/sysctl.conf and reboot your machine > > refer to xf86(4) for details > > [ 1833.671] linear framebuffer access unavailable > > [ 1833.671] (II) LoadModule: "glx" > > [ 1833.677] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > > [ 1833.697] (II) Module glx: vendor="X.Org Foundation" > > [ 1833.697] compiled for 1.20.13, module version = 1.0.0 > > [ 1833.697] ABI class: X.Org Server Extension, version 10.0 > > [ 1833.698] (==) Matched modesetting as autoconfigured driver 0 > > [ 1833.698] (==) Assigned the driver to the xf86ConfigLayout > > [ 1833.698] (II) LoadModule: "modesetting" > > [ 1833.701] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so > > [ 1833.703] (II) Module modesetting: vendor="X.Org Foundation" > > [ 1833.703] compiled for 1.20.13, module version = 1.20.13 > > [ 1833.703] Module class: X.Org Video Driver > > [ 1833.703] ABI class: X.Org Video Driver, version 24.1 > > [ 1833.703] (II) modesetting: Driver for Modesetting Kernel Drivers: kms > > [ 1833.703] (WW) Falling back to old probe method for modesetting > > [ 1833.721] (II) modeset(0): using default device > > [ 1833.722] (II) modeset(0): Creating default Display subsection in > > Screen section > > "Default Screen Section" for depth/fbbpp 24/32 > > [ 1833.723] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 > > [ 1833.723] (==) modeset(0): RGB weight 888 > > [ 1833.723] (==) modeset(0): Default visual is TrueColor > > [ 1833.723] (II) Loading sub module "glamoregl" > > [ 1833.723] (II) LoadModule: "glamoregl" > > [ 1833.731] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > > [ 1833.767] (II) Module glamoregl: vendor="X.Org Foundation" > > [ 1833.767] compiled for 1.20.13, module version = 1.0.1 > > [ 1833.767] ABI class: X.Org ANSI C Emulation, version 0.4 > > [ 1833.863] (II) modeset(0): glamor X acceleration enabled on Mesa > > DRI Intel(R) Pineview M > > [ 1833.863] (II) modeset(0): glamor initialized > > [ 1833.865] (II) modeset(0): Output LVDS-1 has no monitor section > > [ 1833.880] (II) modeset(0): Output VGA-1 has no monitor section > > [ 1833.882] (II) modeset(0): EDID for output LVDS-1 > > [ 1833.882] (II) modeset(0): Manufacturer: SEC Model: 3242 Serial#: 0 > > [ 1833.882] (II) modeset(0): Year: 2011 Week: 0 > > [ 1833.882] (II) modeset(0): EDID Version: 1.3 > > [ 1833.882] (II) modeset(0): Digital Display Input > > [ 1833.882] (II) modeset(0): Max Image Size [cm]: horiz.: 22 vert.: 13 > > [ 1833.882] (II) modeset(0): Gamma: 2.20 > > [ 1833.882] (II) modeset(0): No DPMS capabilities specified > > [ 1833.882] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb > > 4:4:4 > > [ 1833.882] (II) modeset(0): First detailed timing is preferred mode > > [ 1833.882] (II) modeset(0): redX: 0.600 redY: 0.340 greenX: 0.310 > > greenY: 0.560 > > [ 1833.882] (II) modeset(0): blueX: 0.150 blueY: 0.130 whiteX: > > 0.313 whiteY: 0.329 > > [ 1833.882] (II) modeset(0): Manufacturer's mask: 0 > > [ 1833.882] (II) modeset(0): Supported detailed timing: > > [ 1833.882] (II) modeset(0): clock: 57.6 MHz Image Size: 223 x 125 mm > > [ 1833.882] (II) modeset(0): h_active: 1024 h_sync: 1048 h_sync_end > > 1184 h_blank_end 1352 h_border: 0 > > [ 1833.883] (II) modeset(0): v_active: 600 v_sync: 603 v_sync_end > > 609 v_blanking: 710 v_border: 0 > > [ 1833.883] (II) modeset(0): Unknown vendor-specific block f > > [ 1833.883] (II) modeset(0): SAMSUNG > > [ 1833.883] (II) modeset(0): 101NT08-805 > > [ 1833.883] (II) modeset(0): EDID (in hex): > > [ 1833.883] (II) modeset(0): 00ffffffffffff004ca3423200000000 > > [ 1833.883] (II) modeset(0): 0015010380160d780a859599574f8f26 > > [ 1833.883] (II) modeset(0): 21505400000001010101010101010101 > > [ 1833.883] (II) modeset(0): 0101010101018016004841586e201888 > > [ 1833.883] (II) modeset(0): 3600df7d000000190000000f00000000 > > [ 1833.883] (II) modeset(0): 000000000058d20a5500000000fe0053 > > [ 1833.883] (II) modeset(0): 414d53554e470a2020202020000000fe > > [ 1833.883] (II) modeset(0): 003130314e5430382d3830350a200046 > > [ 1833.885] (II) modeset(0): Printing probed modes for output LVDS-1 > > [ 1833.885] (II) modeset(0): Modeline "1024x600"x60.0 57.60 1024 > > 1048 1184 1352 600 603 609 710 -hsync -vsync (42.6 kHz eP) > > [ 1833.885] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 > > 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 > > 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 > > 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 > > 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 > > 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 > > 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 > > 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 > > 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 > > 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 > > 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 > > 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 > > 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 > > 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 > > 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 > > 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 > > 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) > > [ 1833.885] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 > > 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 > > 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 > > 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 > > 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 > > 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 > > 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 > > 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 > > 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 > > 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 > > 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 > > 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 > > 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 > > 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 > > 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 > > 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 > > 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 > > 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 > > 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 > > 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 > > 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) > > [ 1833.886] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 > > 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 > > 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 > > 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 > > 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 > > 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 > > 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 > > 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 > > 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 > > 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 > > 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 > > 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 > > 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) > > [ 1833.887] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 > > 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) > > [ 1833.902] (II) modeset(0): EDID for output VGA-1 > > [ 1833.902] (II) modeset(0): Output LVDS-1 connected > > [ 1833.902] (II) modeset(0): Output VGA-1 disconnected > > [ 1833.902] (II) modeset(0): Using exact sizes for initial modes > > [ 1833.902] (II) modeset(0): Output LVDS-1 using initial mode 1024x600 +0+0 > > [ 1833.903] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) > > [ 1833.903] (==) modeset(0): DPI set to (96, 96) > > [ 1833.903] (II) Loading sub module "fb" > > [ 1833.903] (II) LoadModule: "fb" > > [ 1833.907] (II) Loading /usr/X11R6/lib/modules/libfb.so > > [ 1833.909] (II) Module fb: vendor="X.Org Foundation" > > [ 1833.909] compiled for 1.20.13, module version = 1.0.0 > > [ 1833.909] ABI class: X.Org ANSI C Emulation, version 0.4 > > [ 1833.911] Require OpenGL version 2.1 or later. > > [ 1833.911] (EE) modeset(0): Failed to initialize glamor at ScreenInit() > > time. > > [ 1833.911] (EE) > > Fatal server error: > > [ 1833.912] (EE) AddScreen/ScreenInit failed for driver 0 > > [ 1833.912] (EE) > > [ 1833.912] (EE) > > Please consult the The X.Org Foundation support > > at http://wiki.x.org > > for help. > > [ 1833.912] (EE) Please also check the log file at > > "/home/caius/.local/share/xorg/Xorg.0.log" for additional information. > > [ 1833.912] (EE) > > [ 1833.927] (EE) Server terminated with error (1). Closing log file. > > > > I've tried to force use of Intel driver: > > > > [ 3586.170] > > X.Org X Server 1.20.13 > > X Protocol Version 11, Revision 0 > > [ 3586.177] Build Operating System: OpenBSD 7.0 amd64 > > [ 3586.181] Current Operating System: OpenBSD tel-branora.my.domain > > 7.0 GENERIC.MP#5 amd64 > > [ 3586.185] Build Date: 07 December 2021 12:11:16PM > > [ 3586.189] > > [ 3586.193] Current version of pixman: 0.40.0 > > [ 3586.197] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 3586.197] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 3586.217] (==) Log file: > > "/home/caius/.local/share/xorg/Xorg.0.log", Time: Thu Feb 3 22:11:20 > > 2022 > > [ 3586.224] (==) Using config file: "/etc/X11/xorg.conf" > > [ 3586.230] (==) Using system config directory > > "/usr/X11R6/share/X11/xorg.conf.d" > > [ 3586.231] (==) No Layout section. Using the first Screen section. > > [ 3586.231] (**) |-->Screen "Screen0" (0) > > [ 3586.231] (**) | |-->Monitor "LVDS-0" > > [ 3586.232] (==) No device specified for screen "Screen0". > > Using the first device section listed. > > [ 3586.232] (**) | |-->Device "Intel GMA3150" > > [ 3586.233] (==) Automatically adding devices > > [ 3586.233] (==) Automatically enabling devices > > [ 3586.233] (==) Not automatically adding GPU devices > > [ 3586.233] (==) Max clients allowed: 256, resource mask: 0x1fffff > > [ 3586.234] (==) FontPath set to: > > /usr/X11R6/lib/X11/fonts/misc/, > > /usr/X11R6/lib/X11/fonts/TTF/, > > /usr/X11R6/lib/X11/fonts/OTF/, > > /usr/X11R6/lib/X11/fonts/Type1/, > > /usr/X11R6/lib/X11/fonts/100dpi/, > > /usr/X11R6/lib/X11/fonts/75dpi/ > > [ 3586.234] (==) ModulePath set to "/usr/X11R6/lib/modules" > > [ 3586.234] (II) The server relies on wscons to provide the list of > > input devices. > > If no devices become available, reconfigure wscons or disable > > AutoAddDevices. > > [ 3586.234] (II) Loader magic: 0xeaa918fef00 > > [ 3586.234] (II) Module ABI versions: > > [ 3586.234] X.Org ANSI C Emulation: 0.4 > > [ 3586.234] X.Org Video Driver: 24.1 > > [ 3586.234] X.Org XInput driver : 24.1 > > [ 3586.234] X.Org Server Extension : 10.0 > > [ 3586.235] (--) Using wscons driver on /dev/ttyC4 > > [ 3586.249] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem > > (Permission denied) > > Check that you have set 'machdep.allowaperture=1' > > in /etc/sysctl.conf and reboot your machine > > refer to xf86(4) for details > > [ 3586.249] linear framebuffer access unavailable > > [ 3586.250] (II) LoadModule: "glx" > > [ 3586.253] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > > [ 3586.262] (II) Module glx: vendor="X.Org Foundation" > > [ 3586.262] compiled for 1.20.13, module version = 1.0.0 > > [ 3586.263] ABI class: X.Org Server Extension, version 10.0 > > [ 3586.263] (II) LoadModule: "intel" > > [ 3586.265] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so > > [ 3586.266] (II) Module intel: vendor="X.Org Foundation" > > [ 3586.266] compiled for 1.20.13, module version = 2.99.916 > > [ 3586.266] Module class: X.Org Video Driver > > [ 3586.266] ABI class: X.Org Video Driver, version 24.1 > > [ 3586.267] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: > > i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, > > 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, > > Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, > > GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 > > [ 3586.268] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 > > [ 3586.268] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 > > [ 3586.268] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: > > 5200, 6200, P6300 > > [ 3586.268] (EE) No devices detected. > > [ 3586.268] (EE) > > Fatal server error: > > [ 3586.268] (EE) no screens found(EE) > > [ 3586.268] (EE) > > Please consult the The X.Org Foundation support > > at http://wiki.x.org > > for help. > > [ 3586.269] (EE) Please also check the log file at > > "/home/caius/.local/share/xorg/Xorg.0.log" for additional information. > > [ 3586.269] (EE) > > [ 3586.282] (EE) Server terminated with error (1). Closing log file. > > > >
