On Wed, Sep 07, 2022 at 01:16:50PM +0100, Tom Smyth wrote: > Hi Erling, > > it depends do you mean soft raid, that will be either AHCI using intel > driver or LSI Raid emulation (where you can onfigure the raid in the > option rom (after POST just before the OS Boots) it depneds on the > chipset setup ...
Thanksn. And good question. I meant (and specified) softraid. The machine has RAID options in BIOS but I have simply "standardized" on using softraid on all hardware over the years. Are there gains (performance- or stability wise) in letting the hardware do the RAID 1 mirroring instead of softraid? Erling > Dell may put the LIS as a PERC, it also may be a separate card or i/o > module to the onboard sata ... > Hope this helps > > > On Wed, 7 Sept 2022 at 12:19, Erling Westenvik <[email protected]> > wrote: > > > On Wed, Sep 07, 2022 at 11:41:49AM +0100, Tom Smyth wrote: > > > hi > > > > > > i would check bios / firmware settings > > > > > > try disabling memory mapped i/o in bios > > > > > > check processor settings enable vt-d disable hyper threading ensure > > execute > > > disable is enabled > > > > > > update the bios as it will update cpu microcode ... > > > > Great. Thanks, Tom. > > > > > dell alow you to select the emulation of sata > > > ahci vs raid vs sata vs legacy > > > > For 2 x 525GB SSD's in RAID (softraid) 1, that setting would be...? > > > > Erling > > > > > > > > On Wed 7 Sep 2022, 03:02 Erling Westenvik, <[email protected]> > > > wrote: > > > > > > > Hello, > > > > > > > > A friend donated an old Dell Precision T5500 workstation, a heavy > > > > bastard with dual Xeon X5675 and 72GB RAM which still packs a punch I > > > > believe. At least it does for me. I would like it to replace my old i7 > > > > 3770k. However, I'm starting to have doubts: > > > > > > > > 1) On initial boot (with 7.1 release, on a usb stick) it more or less > > > > immediately panicked into ddb when I tried to pipe dmesg into a file on > > > > the usb stick. I took out the NVMe-card, and whether or not that was > > the > > > > problem the machine anyhow behaved better long enough for me to get > > > > network and do a fw_update. > > > > > > > > 2) After fw_update the radeondrm was detected and I got a nice > > 2560x1600 > > > > console. However, before it would give me a login prompt the machine > > got > > > > stuck with repeating complaints about "ehci_device_clear_toggle: queue > > > > active". So – USB related, right? Very well! Out with the usb stick, > > in > > > > with an old SSD with OpenBSD 6.7. > > > > > > > > 3) The machine behaves better, xenodm starts fine with cwm, but it > > won't > > > > resume after suspend (zzz). > > > > > > > > Some or all of the above problems may have solutions, trivial or not, > > > > but more problems may perhaps lurk under the surface..? > > > > > > > > So I guess my question is if someone knows whether these Dell machines > > > > are known to be error prone in general, or problematic with OpenBSD in > > > > particular, and if I should stop before wasting time!? > > > > > > > > Sincerely, > > > > > > > > Erling > > > > > > > > OpenBSD 7.1 (GENERIC.MP) #465: Mon Apr 11 18:03:57 MDT 2022 > > > > [email protected]:/usr/src/sys/arch/amd64/compile/ > > GENERIC.MP > > > > real mem = 77290508288 (73709MB) > > > > avail mem = 74930786304 (71459MB) > > > > random: good seed from bootblocks > > > > mpath0 at root > > > > scsibus0 at mpath0: 256 targets > > > > mainbus0 at root > > > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0450 (102 entries) > > > > bios0: vendor Dell Inc. version "A18" date 10/15/2018 > > > > bios0: Dell Inc. Precision WorkStation T5500 > > > > acpi0 at bios0: ACPI 3.0 > > > > acpi0: sleep states S0 S3 S4 S5 > > > > acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA ____ _RAT > > SLIC > > > > SSDT > > > > acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) > > > > PCI5(S5) PCI6(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) > > > > PCI8(S5) PCIA(S5) PCIB(S5) > > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > > > cpu0 at mainbus0: apid 32 (boot processor) > > > > cpu0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.54 MHz, 06-2c-02 > > > > cpu0: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu0: 256KB 64b/line 8-way L2 cache > > > > cpu0: smt 0, core 0, package 1 > > > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > > > cpu0: apic clock running at 132MHz > > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > > > > cpu1 at mainbus0: apid 34 (application processor) > > > > cpu1: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu1: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu1: 256KB 64b/line 8-way L2 cache > > > > cpu1: smt 0, core 1, package 1 > > > > cpu2 at mainbus0: apid 36 (application processor) > > > > cpu2: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu2: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu2: 256KB 64b/line 8-way L2 cache > > > > cpu2: smt 0, core 2, package 1 > > > > cpu3 at mainbus0: apid 48 (application processor) > > > > cpu3: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu3: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu3: 256KB 64b/line 8-way L2 cache > > > > cpu3: smt 0, core 8, package 1 > > > > cpu4 at mainbus0: apid 50 (application processor) > > > > cpu4: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu4: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu4: 256KB 64b/line 8-way L2 cache > > > > cpu4: smt 0, core 9, package 1 > > > > cpu5 at mainbus0: apid 52 (application processor) > > > > cpu5: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu5: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu5: 256KB 64b/line 8-way L2 cache > > > > cpu5: smt 0, core 10, package 1 > > > > cpu6 at mainbus0: apid 0 (application processor) > > > > cpu6: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu6: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu6: 256KB 64b/line 8-way L2 cache > > > > cpu6: smt 0, core 0, package 0 > > > > cpu7 at mainbus0: apid 2 (application processor) > > > > cpu7: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.00 MHz, 06-2c-02 > > > > cpu7: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu7: 256KB 64b/line 8-way L2 cache > > > > cpu7: smt 0, core 1, package 0 > > > > cpu8 at mainbus0: apid 4 (application processor) > > > > cpu8: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu8: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu8: 256KB 64b/line 8-way L2 cache > > > > cpu8: smt 0, core 2, package 0 > > > > cpu9 at mainbus0: apid 16 (application processor) > > > > cpu9: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu9: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu9: 256KB 64b/line 8-way L2 cache > > > > cpu9: smt 0, core 8, package 0 > > > > cpu10 at mainbus0: apid 18 (application processor) > > > > cpu10: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu10: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu10: 256KB 64b/line 8-way L2 cache > > > > cpu10: smt 0, core 9, package 0 > > > > cpu11 at mainbus0: apid 20 (application processor) > > > > cpu11: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz, 3325.01 MHz, 06-2c-02 > > > > cpu11: > > > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,MELTDOWN > > > > cpu11: 256KB 64b/line 8-way L2 cache > > > > cpu11: disabling user TSC (skew=167) > > > > cpu11: smt 0, core 10, package 0 > > > > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins, > > remapped > > > > ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins, > > remapped > > > > ioapic2 at mainbus0: apid 10 pa 0xfec88000, version 20, 24 pins, > > remapped > > > > acpimcfg0 at acpi0 > > > > acpimcfg0: addr 0xf8000000, bus 0-63 > > > > acpihpet0 at acpi0: 14318179 Hz > > > > acpiprt0 at acpi0: bus 0 (PCI0) > > > > acpiprt1 at acpi0: bus 1 (PCI1) > > > > acpiprt2 at acpi0: bus 2 (PCI2) > > > > acpiprt3 at acpi0: bus 3 (PCI3) > > > > acpiprt4 at acpi0: bus 5 (PCI5) > > > > acpiprt5 at acpi0: bus 6 (PCI6) > > > > acpiprt6 at acpi0: bus 32 (PCI7) > > > > acpiprt7 at acpi0: bus -1 (PCI8) > > > > acpiprt8 at acpi0: bus 34 (PCIA) > > > > acpiprt9 at acpi0: bus 35 (PCIB) > > > > acpibtn0 at acpi0: VBTN > > > > "*pnp0c14" at acpi0 not configured > > > > acpipci0 at acpi0 PCI0 > > > > acpicmos0 at acpi0 > > > > com0 at acpi0 COMA addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > > > > acpipci1 at acpi0 PCI7 > > > > acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu8 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu9 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu10 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > acpicpu11 at acpi0: C3(350@96 mwait.1@0x20), C2(500@64 mwait.1@0x10), > > > > C1(1000@1 mwait.1) > > > > cpu0: using IvyBridge MDS workaround > > > > pci0 at mainbus0 bus 0 > > > > pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x22 > > > > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22 > > > > pci1 at ppb0 bus 1 > > > > ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x22: msi > > > > pci2 at ppb1 bus 2 > > > > radeondrm0 at pci2 dev 0 function 0 "ATI Radeon HD 4650" rev 0x00 > > > > drm0 at radeondrm0 > > > > radeondrm0: msi > > > > azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 4000 HD Audio" rev > > 0x00: > > > > msi > > > > azalia0: no supported codecs > > > > ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi > > > > pci3 at ppb2 bus 3 > > > > "Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 not configured > > > > "Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not configured > > > > "Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured > > > > uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 8 > > int 16 > > > > uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 8 > > int 17 > > > > uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 8 > > int 22 > > > > ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 8 > > int 22 > > > > usb0 at ehci0: USB revision 2.0 > > > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > 2.00/1.00 addr 1 > > > > azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: > > msi > > > > azalia1: codecs: Analog Devices AD1984A > > > > audio0 at azalia1 > > > > ppb3 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00 > > > > pci4 at ppb3 bus 4 > > > > ppb4 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00 > > > > pci5 at ppb4 bus 5 > > > > bge0 at pci5 dev 0 function 0 "Broadcom BCM5761" rev 0x10, BCM5761 A1 > > > > (0x5761100): msi, address b8:ac:6f:25:9c:8b > > > > brgphy0 at bge0 phy 1: BCM5761 10/100/1000baseT PHY, rev. 0 > > > > uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 > > int 23 > > > > uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 > > int 17 > > > > uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 > > int 18 > > > > ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 > > int 23 > > > > usb1 at ehci1: USB revision 2.0 > > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > > > 2.00/1.00 addr 1 > > > > ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 > > > > pci6 at ppb5 bus 6 > > > > pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 > > > > ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, > > AHCI > > > > 1.2 > > > > ahci0: port 0: 3.0Gb/s > > > > ahci0: port 1: 1.5Gb/s > > > > ahci0: PHY offline on port 2 > > > > ahci0: port 3: 3.0Gb/s > > > > ahci0: PHY offline on port 4 > > > > scsibus1 at ahci0: 32 targets > > > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> > > > > naa.500a0751169bcccc > > > > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin > > > > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD-ROM DH30N, A101> removable > > > > sd1 at scsibus1 targ 3 lun 0: <ATA, Crucial_CT525MX3, M0C> > > > > naa.500a0751169bc857 > > > > sd1: 500786MB, 512 bytes/sector, 1025610768 sectors, thin > > > > ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic > > 8 > > > > int 20 > > > > iic0 at ichiic0 > > > > usb2 at uhci0: USB revision 1.0 > > > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > usb3 at uhci1: USB revision 1.0 > > > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > usb4 at uhci2: USB revision 1.0 > > > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > usb5 at uhci3: USB revision 1.0 > > > > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > usb6 at uhci4: USB revision 1.0 > > > > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > usb7 at uhci5: USB revision 1.0 > > > > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev > > > > 1.00/1.00 addr 1 > > > > isa0 at pcib0 > > > > isadma0 at isa0 > > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > > > pckbd0 at pckbc0 (kbd slot) > > > > wskbd0 at pckbd0: console keyboard > > > > pcppi0 at isa0 port 0x61 > > > > spkr0 at pcppi0 > > > > lpt0 at isa0 port 0x378/4 irq 7 > > > > pci7 at mainbus0 bus 32 > > > > ppb6 at pci7 dev 7 function 0 "Intel X58 PCIE" rev 0x22: msi > > > > pci8 at ppb6 bus 34 > > > > ppb7 at pci7 dev 9 function 0 "Intel X58 PCIE" rev 0x22: msi > > > > pci9 at ppb7 bus 35 > > > > "Intel X58 Misc" rev 0x22 at pci7 dev 20 function 0 not configured > > > > "Intel X58 GPIO" rev 0x22 at pci7 dev 20 function 1 not configured > > > > "Intel X58 RAS" rev 0x22 at pci7 dev 20 function 2 not configured > > > > umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk Ultra Fit" > > rev > > > > 2.10/1.00 addr 2 > > > > umass0: using SCSI over Bulk-Only > > > > scsibus2 at umass0: 2 targets, initiator 0 > > > > sd2 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable > > > > serial.07815583021212121230 > > > > sd2: 29328MB, 512 bytes/sector, 60063744 sectors > > > > uhidev0 at uhub7 port 2 configuration 1 interface 0 "CHICONY HP Basic > > USB > > > > Keyboard" rev 1.10/3.00 addr 2 > > > > uhidev0: iclass 3/1 > > > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > > > wskbd1 at ukbd0 mux 1 > > > > vscsi0 at root > > > > scsibus3 at vscsi0: 256 targets > > > > softraid0 at root > > > > scsibus4 at softraid0: 256 targets > > > > root on sd2a (1c3549d7efe402cc.a) swap on sd2b dump on sd2b > > > > WARNING: / was not properly unmounted > > > > radeondrm0: RV730 > > > > r600_cp: Failed to load firmware "radeon/RV730_pfp.bin" > > > > [drm] *ERROR* Failed to load firmware! > > > > drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init > > > > drm0 detached > > > > radeondrm0 detached > > > > vga1 at pci2 dev 0 function 0 "ATI Radeon HD 4650" rev 0x00 > > > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation), using > > wskbd0 > > > > wskbd1: connecting to wsdisplay0 > > > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > > > > > > > > > > > > -- > Kindest regards, > Tom Smyth.
