I have a 1 GiB win2k/ntfs disk image that was created with qemu, using
the default "raw" image format (it's exactly what you would get if you
copied the data from a physical disk partition to the file).
The OS inside the image is Windows 2000 Server 5.00.2195, with the NTFS
partition marked as type 'Basic', and correctly offset by 63 sectors
from the start of the disk image. For some reason, disklabel reports
the filesystem type as "unknown".
The disk image is good, as qemu is able to boot it. It's also possible
to boot qemu with a knoppix ISO and then do a "mount -r -t ntfs
/dev/hda1 /mnt" to access the emulated disk partition.
Trying to mount the filesystem in OpenBSD (outside of qemu) doesn't work:
$ sudo vnconfig -vc svnd1c win2k.img
svnd1c: 1073741824 bytes on win2k.img
$ sudo mount -r -t ntfs /dev/svnd1i /mnt
mount_ntfs: /dev/svnd1i on /mnt: Operation not supported
(I also tried to mount svnd1c just in case)
Here's the fdisk, disklabel and dmesg:
$ sudo fdisk svnd1c
fdisk: sysctl(machdep.bios.diskinfo): Device not configured
Disk: svnd1c geometry: 20971/1/100 [2097152 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*0: 07 0 0 64 - 20946 0 24 [ 63: 2094561 ] HPFS/QNX/AUX
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
$ sudo disklabel svnd1c
disklabel: warning, DOS partition table with no valid OpenBSD partition
# /dev/rsvnd1c:
type: SCSI
disk: vnd device
label: fictitious
flags:
bytes/sector: 512
sectors/track: 100
tracks/cylinder: 1
sectors/cylinder: 100
cylinders: 20971
total sectors: 2097152
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 2097152 0 unused 0 0 # Cyl 0 - 20971*
i: 2094561 63 unknown # Cyl 0*- 20946*
$ dmesg
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class, 128KB
L2 cache) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD Powernow: FID VID TTP TM STC
real mem = 501784576 (490024K)
avail mem = 450740224 (440176K)
using 4278 buffers containing 25190400 bytes (24600K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(39) BIOS, date 08/24/05, BIOS32 rev. 0 @ 0xfd5f0
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 760 PCI" rev 0x03
ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6330 VGA" rev 0x00: aperture at 0xe8000000,
size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 760: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N060ATMR04-0>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO SOSC-2483K, KCK2> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"SIS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 5, SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 9, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 11, version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 2 "SIS 7002 USB" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SIS EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x91: irq 3, address
00:c0:9f:d4:41:1b
rlphy0 at sis0 phy 13: RTL8201L 10/100 PHY, rev. 1
cbb0 at pci0 dev 6 function 0 "Texas Instruments PCI1410 CardBus" rev 0x02: irq
3
vendor "Broadcom", unknown product 0x4318 (class network subclass
miscellaneous, rev 0x02) at pci0 dev 11 function 0 not configured
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask efdd netmask efdd ttymask ffdf
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
