Parts purchased online: - SATA 7Pin Female to 7pin Male 90 Degree Angled Adapter - 18in 1 Port SATA to eSATA Plate Adapter
I put electrical tape over the 90 degree adapter, to avoid contact with the case. Used the original plate as a template to mark holes in left side of the case. Drilled 4 holes - 2 for the screws, 2 for slot and used a Dremel to cut the slot between. With 3.5 in. SATA II enclosure, seeing about 30% increased throughput as compared to the same disk connected to USB. Nice, relatively easy, way to set up an APU2 external drive... ----- David Rinehart
