Hi,
I'm having problems getting pilot-xfer (from the comms/pilot-link port
on i386 (CURRENT)) to work properly (at all) with my Lifedrive trough
uvisor and ucom.
First of all, when I connect the USB cable to my LifeDrive, I get the
following lines in my dmesg (see last in this message for full dmesg):
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
These are followed after 4 to 5 seconds by
uvisor0: init failed, TIMEOUT
Pressing the "HotSync" button on the LifeDrive results in the
following new dmesg lines:
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
... again followed by
uvisor0: init failed, TIMEOUT
after about five seconds or so.
The pilot-xfer program is unable to connect to either of /dev/ttyU0 or
/dev/ttyU1, which with the above in mind doesn't seem too strange.
There seems to be something wrong in the initialization preventing the
ucom driver ("at uvisor?") to appear...
Has anyone got this to work with the LifeDrive?
dmesg (sorry for possibly badly formatted lines):
OpenBSD 3.9-beta (GENERIC) #62: Fri Feb 17 16:10:35 GMT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel"
686-class) 1.69 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1700 MHz (1484 mV): speeds: 1700, 1400, 1200,
1000, 800, 600 MHz
real mem = 535863296 (523304K)
avail mem = 481939456 (470644K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(97) BIOS, date 11/21/03, BIOS32 rev. 0 @ 0xfd751
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd750/0x8b0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev
0x03pci_intr_map: no mapping for pin C
: couldn't map interrupt
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev
0x03pci_intr_map: no mapping for pin D
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: irq 3
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x83, i82562: irq
9, address 08:00:46:c8:ad:ab
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
iwi0 at pci2 dev 11 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 9, address 00:0e:35:07:44:15
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N080ATMR04-0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-812, K101> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev
0x03pci_intr_map: no mapping for pin B
: polling
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 9, ICH4 AC97
ac97: codec id 0x594d4803 (Yamaha YMF753-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 2
uhub2: NEC Corporation USB2.0 Hub Controller, rev 2.00/1.00, addr 2
uhub2: 3 ports with 3 removable, self powered
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: Prolific Technology Inc. IEEE-1284 Controller, rev 1.00/2.02,
addr 2, iclass 7/1
ulpt0: using bi-directional mode
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Sun Microsystems Type 6 Mouse, rev 1.00/1.02, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons
wsmouse1 at ums0 mux 0
uhidev1 at uhub2 port 3 configuration 1 interface 0
uhidev1: Sun Microsystems Type 6 Keyboard, rev 1.00/1.01, addr 4, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
The following added when trying to get the HotSync to work. Then I
gave up, mounted an SD card in the LifeDrive, transferred some files,
unmounted the card, and tried HotSync'ing again:
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Toshiba, SD256, 1.0> SCSI0 0/direct removable
sd0: 3817MB, 3817 cyl, 64 head, 32 sec, 512 bytes/sec, 7818112 sec total
sd1 at scsibus1 targ 1 lun 1: <Toshiba, SD256, 1.0> SCSI0 0/direct removable
sd1: 243MB, 243 cyl, 64 head, 32 sec, 512 bytes/sec, 498176 sec total
umass0: at uhub2 port 1 (addr 5) disconnected
sd0 detached
sd1 detached
scsibus1 detached
umass0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
uvisor0: at uhub2 port 1 (addr 5) disconnected
uvisor0 detached
uvisor0 at uhub2 port 1
uvisor0: palmOne, Inc. palmOne Handheld, rev 2.00/1.00, addr 5
uvisor0: init failed, TIMEOUT
--
Andreas Kahari
