HI Olivier, I cannot express how grateful I am that finally is booting emmc. However, I still have an issue, power button does not seem to work and shutdown -p now does not really turn off the device.
pw# shutdown -p now Shutdown NOW! shutdown: [pid 39459] pw# *** FINAL System shutdown message from root@*** *** System going down IMMEDIATELY System shutdown time has arrived syncing disks... done Attempting to power down... And from here nothing happens, the device is not really turned off, I still see hdmi active(black screen) and network leds still on. I have to keep power button pressed long to force power it off. Could be this related to dtb or maybe a bug? I am not sure if dtb file is loaded properly. Still struggling if there is a command to know if proper dtb is loaded this is the log: U-Boot 2021.10 (Mar 21 2024 - 02:36:56 -0600) SoC: Rockchip rk3399 Reset cause: POR Model: Pine64 RockPro64 v2.1 DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0 Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Pine64 RockPro64 v2.1 Net: Could not get PHY for ethernet@fe300000: addr -1 No ethernet found. Hit any key to stop autoboot: 0 Card did not respond to voltage select! : -110 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... 63169 bytes read in 33 ms (1.8 MiB/s) Card did not respond to voltage select! : -110 Scanning disk [email protected]... Disk [email protected] not ready Card did not respond to voltage select! : -110 Scanning disk [email protected]... Disk [email protected] not ready Scanning disk [email protected]... Found 3 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image Found EFI removable media binary efi/boot/bootaa64.efi 227979 bytes read in 49 ms (4.4 MiB/s) Booting /efi\boot\bootaa64.efi disks: sd0* >> OpenBSD/arm64 BOOTAA64 1.18 On Mon, Apr 29, 2024 at 8:36 AM OBI <[email protected]> wrote: > > On Sat, 27 Apr 2024 17:11:56 +0200 > "Cristian Danila" <[email protected]> wrote: > > > Dear Misc, > > > > I would really appreciate if someone can give > > me a hint on how can make emmc card bootable > > on a RockPro64 board. > > This is what I did: > > 1) prepared micro sd card: > > dd if=install75.img of=/dev/sdg bs=1024M > > dd if=idbloader.img of=/dev/sdg bs=512 seek=64 > > dd if=u-boot.itb of=/dev/sdg bs=512 seek=16384 > > > > copy "rk3399-rockpro64-v2.dtb" to boot partition at > > following location: /dtb/rockchip/rk3399-rockpro64-v2.dtb > > > > 2) I did installed openbsd on emmc card > > > > But after installed it, before reboot, I understood that I need to > > write the 3 files: idbloader.img, u-boot.itb and > > rk3399-rockpro64-v2.dtb into emmc card. > > So before reboot, use console and write the files. > > Could you please help me in telling how I do that? > > I think(still struggling with it) that somehow I have to copy the > > same sectors > > from sdcard and write it to emmc + copy the dtb file. > > > > Thank you. > > > > Hello, > > I wrote in the past "notes / process tasks" to follow for fresh install > OpenBSD on a RockPro 64, was done for 6.7-current. > I don't know if still available: > > https://blog.burelli.fr/en/arm/arm64-install-openbsd-rockpro64/ > > For now i am using quartz-a-model from Pine64. > > > Succently: > > * dtb has to be installed on the USB Key, because kernel on usb key has > to detect the emmc and has to be able to write on it. Without > installing dtb on the USB key, it’s impossible to write to the emmc > card. > > --> After reboot the installed kernel should detect and write on the > emmc. install dtb if not. > > Ations to do on another machine to prepare the installation (sd1 is usb > key): > doas mount /dev/sd1i /mnt > doas mkdir /mnt/rockchip > doas cp /usr/local/share/dtb/arm64/rockchip/rk3399-rockpro64.dtb > /mnt/rockchip/ > doas umount /mnt > > > Olivier.
