Have you tried the NIC with another operating system? I have heard that the RockPro64's PCIe support is somewhat hit-and-miss, so it may be that the hardware is incompatible.
On Sat, 3 Aug 2024, at 18:17, Georg Bege wrote: > Hi, > > Sorry but I want to add some more information. > > I have another PCI-E card which is an SATA extension card (6x sata port) > I think it’s an PCI-E x4 card. > > This one does get detected, I know for sure that it was working on > FreeBSD though with this card. > > ——————————————— snip ——————————————— > # pcidump > > Domain /dev/pci0: > > 0:0:0: Rockchip RK3399 > > 1:0:0: ASMedia unknown > > > > rkpcie0 at mainbus0 > > pci0 at rkpcie0 > > ppb0 at pci0 dev 0 function 0 "Rockchip RK3399" rev 0x00: msi > > pci1 at ppb0 bus 1 > > ahci0 at pci1 dev 0 function 0 vendor "ASMedia", unknown product 0x1166 > rev 0x02: msi, AHCI 1.3.1 > > ——————————————— snip ——————————————— > > > > > > I think ASMedia is correct here, the interesting thing is now - if I > use the Intel NIC I225V, it’s get detected as ASMedia card too (which > should be wrong?): > > > > ——————————————— snip ——————————————— > > gateway# pcidump > > > Domain /dev/pci0: > > 0:0:0: Rockchip RK3399 > > 1:0:0: ASMedia ASM1182e > > > > gateway# dmesg|grep pci > > "pcie-phy" at syscon27 not configured > > rkpcie0 at mainbus0 > > pci0 at rkpcie0 > > ppb0 at pci0 dev 0 function 0 "Rockchip RK3399" rev 0x00: msi > > pci1 at ppb0 bus 1 > > ppb1 at pci1 dev 0 function 0 "ASMedia ASM1182e" rev 0x00 > > pci2 at ppb1 bus 2 > > ——————————————— snip ——————————————— > > > > I don’t understand why this happens, does this mean that the igc driver > doesn’t detect the card on. The RockPro64 PCI-E bus? > > Is this a mistake in the driver? > > > > Regards, > > Georg > > > > >> Am 03.08.2024 um 18:53 schrieb Georg Bege <[email protected]>: >> >> Hi OpenBSD folks, >> >> Im having issue with an Intel I225-V dual port NIC and Rockpro64, >> the card isn’t being detected despite the kernel detects pci0,1,2 devices. >> >> Since the card itself is supported according to igc(4) I guess its a problem >> on the Rockpro64 board? >> I only need a single or dual-port card, any idea what other card I could use? >> >> Or is there a solution? >> >> Below I copy a dimesg output. >> >> Regards, >> >> Georg >> >> ————————————————— snip ————————————————— >> OpenBSD 7.5 (GENERIC.MP) #138: Wed Mar 20 19:42:15 MDT 2024 >> [email protected]:/usr/src/sys/arch/arm64/compile/GENERIC.MP >> real mem = 4123770880 (3932MB) >> avail mem = 3912286208 (3731MB) >> random: good seed from bootblocks >> mainbus0 at root: Pine64 RockPro64 v2.1 >> psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND >> efi0 at mainbus0: UEFI 2.10 >> efi0: Das U-Boot rev 0x20240700 >> smbios0 at efi0: SMBIOS 3.7.0 >> smbios0: vendor U-Boot version "2024.07" date 07/01/2024 >> smbios0: Pine64 RockPro64 >> cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 >> cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu0: 512KB 64b/line 16-way L2 cache >> cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16 >> cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 >> cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu1: 512KB 64b/line 16-way L2 cache >> cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 >> cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu2: 512KB 64b/line 16-way L2 cache >> cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 >> cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache >> cpu3: 512KB 64b/line 16-way L2 cache >> cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2 >> cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache >> cpu4: 1024KB 64b/line 16-way L2 cache >> cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16 >> cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2 >> cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache >> cpu5: 1024KB 64b/line 16-way L2 cache >> apm0 at mainbus0 >> agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1, 2: >> "interrupt-controller" >> agintcmsi0 at agintc0 >> syscon0 at mainbus0: "qos" >> syscon1 at mainbus0: "qos" >> syscon2 at mainbus0: "qos" >> syscon3 at mainbus0: "qos" >> syscon4 at mainbus0: "qos" >> syscon5 at mainbus0: "qos" >> syscon6 at mainbus0: "qos" >> syscon7 at mainbus0: "qos" >> syscon8 at mainbus0: "qos" >> syscon9 at mainbus0: "qos" >> syscon10 at mainbus0: "qos" >> syscon11 at mainbus0: "qos" >> syscon12 at mainbus0: "qos" >> syscon13 at mainbus0: "qos" >> syscon14 at mainbus0: "qos" >> syscon15 at mainbus0: "qos" >> syscon16 at mainbus0: "qos" >> syscon17 at mainbus0: "qos" >> syscon18 at mainbus0: "qos" >> syscon19 at mainbus0: "qos" >> syscon20 at mainbus0: "qos" >> syscon21 at mainbus0: "qos" >> syscon22 at mainbus0: "qos" >> syscon23 at mainbus0: "qos" >> syscon24 at mainbus0: "qos" >> syscon25 at mainbus0: "power-management" >> "power-controller" at syscon25 not configured >> syscon26 at mainbus0: "syscon" >> "io-domains" at syscon26 not configured >> rkclock0 at mainbus0 >> rkclock1 at mainbus0 >> rkclock_set_frequency(rkclock1, 237, 400000000) >> syscon27 at mainbus0: "syscon" >> "io-domains" at syscon27 not configured >> "usb2phy" at syscon27 not configured >> "usb2phy" at syscon27 not configured >> rkemmcphy0 at syscon27 >> "pcie-phy" at syscon27 not configured >> rktcphy0 at mainbus0 >> rktcphy1 at mainbus0 >> rkpinctrl0 at mainbus0: "pinctrl" >> rkgpio0 at rkpinctrl0 >> rkgpio1 at rkpinctrl0 >> rkgpio2 at rkpinctrl0 >> rkgpio3 at rkpinctrl0 >> rkgpio4 at rkpinctrl0 >> pwmreg0 at mainbus0 >> syscon28 at mainbus0: "syscon" >> syscon29 at mainbus0: "syscon" >> "fit-images" at mainbus0 not configured >> rkdrm0 at mainbus0 >> drm0 at rkdrm0 >> "memory-controller" at mainbus0 not configured >> "pmu_a53" at mainbus0 not configured >> "pmu_a72" at mainbus0 not configured >> agtimer0 at mainbus0: 24000 kHz >> "xin24m" at mainbus0 not configured >> rkpcie0 at mainbus0 >> pci0 at rkpcie0 >> ppb0 at pci0 dev 0 function 0 "Rockchip RK3399" rev 0x00: msi >> pci1 at ppb0 bus 1 >> ppb1 at pci1 dev 0 function 0 "ASMedia ASM1182e" rev 0x00 >> pci2 at ppb1 bus 2 >> dwge0 at mainbus0: rev 0x35, address ba:70:1f:33:87:d9 >> rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 >> dwmmc0 at mainbus0: 50 MHz base clock >> sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma >> dwmmc1 at mainbus0: 50 MHz base clock >> sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma >> sdhc0 at mainbus0 >> sdhc0: SDHC 3.00, 200 MHz base clock >> sdmmc2 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma >> ehci0 at mainbus0 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev >> 2.00/1.00 addr 1 >> ohci0 at mainbus0: version 1.0 >> ehci1 at mainbus0 >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev >> 2.00/1.00 addr 1 >> ohci1 at mainbus0: version 1.0 >> "debug" at mainbus0 not configured >> "debug" at mainbus0 not configured >> "debug" at mainbus0 not configured >> "debug" at mainbus0 not configured >> "debug" at mainbus0 not configured >> "debug" at mainbus0 not configured >> rkdwusb0 at mainbus0: "usb" >> xhci0 at rkdwusb0, xHCI 1.10 >> usb2 at xhci0: USB revision 3.0 >> uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.00 addr 1 >> rkdwusb1 at mainbus0: "usb" >> xhci1 at rkdwusb1, xHCI 1.10 >> usb3 at xhci1: USB revision 3.0 >> uhub3 at usb3 configuration 1 interface 0 "Generic xHCI root hub" rev >> 3.00/1.00 addr 1 >> "saradc" at mainbus0 not configured >> rkrng0 at mainbus0: ver 1 >> rkrng1 at mainbus0: ver 1 >> rkiic0 at mainbus0 >> iic0 at rkiic0 >> escodec0 at iic0 addr 0x11 >> rkiic1 at mainbus0 >> iic1 at rkiic1 >> com0 at mainbus0: dw16550, 64 byte fifo >> com1 at mainbus0: dw16550, 64 byte fifo >> com1: console >> rkspi0 at mainbus0 >> rktemp0 at mainbus0 >> rkiic2 at mainbus0 >> iic2 at rkiic2 >> rkpmic0 at iic2 addr 0x1b: RK808 >> fanpwr0 at iic2 addr 0x40: SYR827, 1.00 VDC >> fanpwr1 at iic2 addr 0x41: SYR828, 1.00 VDC >> rkiic3 at mainbus0 >> iic3 at rkiic3 >> fusbtc0 at iic3 addr 0x22 >> rkpwm0 at mainbus0 >> rkpwm1 at mainbus0 >> rkpwm2 at mainbus0 >> "dfi" at mainbus0 not configured >> "video-codec" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "video-codec" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "rga" at mainbus0 not configured >> "efuse" at mainbus0 not configured >> "dma-controller" at mainbus0 not configured >> "dma-controller" at mainbus0 not configured >> "watchdog" at mainbus0 not configured >> "rktimer" at mainbus0 not configured >> rkiis0 at mainbus0 >> rkiis1 at mainbus0 >> rkiis2 at mainbus0 >> rkvop0 at mainbus0: RK3399 VOPL >> "iommu" at mainbus0 not configured >> rkvop1 at mainbus0: RK3399 VOPB >> "iommu" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> "iommu" at mainbus0 not configured >> simpleaudio0 at mainbus0 >> rkdwhdmi0 at mainbus0: HDMI TX >> rkdwhdmi0: version 2.11a, phytype 0xf3 >> "gpu" at mainbus0 not configured >> "opp-table-0" at mainbus0 not configured >> "opp-table-1" at mainbus0 not configured >> "opp-table-2" at mainbus0 not configured >> "external-gmac-clock" at mainbus0 not configured >> gpiokeys0 at mainbus0: "GPIO Key Power" >> "ir-receiver" at mainbus0 not configured >> gpioleds0 at mainbus0: "work", "diy" >> pwmfan0 at mainbus0 >> "sdio-pwrseq" at mainbus0 not configured >> graphaudio0 at mainbus0 >> graphaudio1 at mainbus0 >> "spdif-dit" at mainbus0 not configured >> "avdd-regulator" at mainbus0 not configured >> "vcc12v-dcin" at mainbus0 not configured >> "vcc1v8-s3" at mainbus0 not configured >> "vcc3v0-sd" at mainbus0 not configured >> "vcc3v3-pcie-regulator" at mainbus0 not configured >> "vcc3v3-sys" at mainbus0 not configured >> "vcc5v0-host-regulator" at mainbus0 not configured >> "vcc5v0-typec-regulator" at mainbus0 not configured >> "vcc5v0-sys" at mainbus0 not configured >> "vcc5v0-usb" at mainbus0 not configured >> "binman" at mainbus0 not configured >> "smbios" at mainbus0 not configured >> usb4 at ohci0: USB revision 1.0 >> uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev >> 1.00/1.00 addr 1 >> usb5 at ohci1: USB revision 1.0 >> uhub5 at usb5 configuration 1 interface 0 "Generic OHCI root hub" rev >> 1.00/1.00 addr 1 >> audio0 at graphaudio0 >> sdmmc0: can't enable card >> scsibus0 at sdmmc2: 2 targets, initiator 0 >> sd0 at scsibus0 targ 1 lun 0: <Sandisk, DA4032, 0000> removable >> sd0: 29820MB, 512 bytes/sector, 61071360 sectors >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> scsibus2 at softraid0: 256 targets >> root on sd0a (20b03047b1ce77e8.a) swap on sd0b dump on sd0b >> WARNING: bad clock chip time >> WARNING: CHECK AND RESET THE DATE! >> rkvop0: using CRTC 0 for RK3399 VOPL >> rkvop1: using CRTC 1 for RK3399 VOPB >> drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 >> not supported >> drm:pid0:drm_fb_helper_find_format *WARNING* [drm] bpp/depth value of 32/24 >> not supported >> drm:pid0:__drm_fb_helper_find_sizes *WARNING* [drm] No compatible format >> found >> rkdrm0: 1024x768, 32bpp >> wsdisplay0 at rkdrm0 mux 1 >> wsdisplay0: screen 0-5 added (std, vt100 emulation) >> ————————————————— snip ————————————————— >> >> >>
