Ooops, sorry for that. Completely forgot.
Anyways, here it goes ;)
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 469016576 (458024K)
avail mem = 420777984 (410916K)
using 4278 buffers containing 23552000 bytes (23000K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/19/05, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf87e0/256 (14 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10b9 product 0x1573
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
WARNING: can't reserve area for BIOS PROM.
bios0: ROM list: 0xc0000/0xe000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a33 rev 0x01
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 25 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
rl0 at pci2 dev 19 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:e0:7d:82:7f:e2
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci2 dev 20 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:e0:7d:83:8e:a6
rlphy1 at rl1 phy 0: RTL internal PHY
"Acer Labs M5263 LAN" rev 0x50 at pci0 dev 27 function 0 not configured
ohci0 at pci0 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: irq
11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: irq 3,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: irq 5,
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
vendor "Acer Labs", unknown product 0x5461 (class multimedia unknown
subclass 0x03, rev 0x00) at pci0 dev 29 function 0 not configured
pcib0 at pci0 dev 30 function 0 vendor "Acer Labs", unknown product
0x1573 rev 0x31
alipm0 at pci0 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00:
SMBus disabled
pciide0 at pci0 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc7:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0802N>
wd0: 16-sector PIO, LBA48, 76351MB, 156368016 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
"Acer Labs M5287 SATA" rev 0x02 at pci0 dev 31 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
There are two Realtek NICs attached to the only two PCI slots. I was
getting lots of watchdog timeouts from them while using them with
OBSD3.8. Installing 3.9 solved that.
