Crystal, thanks for the suggestion, but that didn't work either.
However, I found a simpler way of doing it: Add the line
${exec_prefix}/bin/xrandr --size 1600x900
with whatever screen resolution you desire, to the file
/etc/X11/xenodm/Xsetup_0
and restart xenodm. (Get acceptable resolutions using
xrandr or lxrandr.)
On Fri, Jul 4, 2025 at 12:25 PM Crystal Kolipe <kolip...@exoticsilicon.com>
wrote:
> On Fri, Jul 04, 2025 at 12:01:22PM -0600, David Raymond wrote:
> > I used to be able to set my X11 screen resolution on boot by putting
> > something like the file
> >
> > Section "Screen"
> > Identifier "Screen0"
> > SubSection "Display"
> > Virtual 1600 900
> > EndSubSection
> > EndSection
>
> You probably want something like:
>
> Section "Monitor"
> Identifier "HDMI-2"
> Modeline "1600x1200_60.00" 161.00 1600 1712 1880 2160 1200 1203 1207
> 1245 -hsync +vsync
> Option "PreferredMode" "1600x1200_60.00"
> EndSection
>
> The Identifier should be the port that the display is actually connected
> to,
> which you can find out with xrandr.
>
> And obviously don't use those specific line timings, but use
> /usr/X11R6/bin/gtf or /usr/X11R6/bin/cvt to generate suitable timings for
> your
> hardware.
>
