Hi,
I'm trying to set up a LACP trunk with thee links to connect to a switch. I
followed the man page:
bash-5.3# ifconfig aggr0 create
bash-5.3# ifconfig aggr0 trunkport em1
bash-5.3# ifconfig aggr0 trunkport em2
bash-5.3# ifconfig aggr0 trunkport em3
bash-5.3# ifconfig aggr0 192.168.241.42/24
bash-5.3# ifconfig aggr0 up
but the aggr0 interface stays offline.
bash-5.3# ifconfig
...
em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:c3:51
index 2 priority 0 llprio 3
trunk: trunkdev aggr0
media: Ethernet autoselect (1000baseT full-duplex,master)
status: active
em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:c3:51
index 3 priority 0 llprio 3
trunk: trunkdev aggr0
media: Ethernet autoselect (1000baseT full-duplex,master)
status: active
em3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:c3:51
index 4 priority 0 llprio 3
trunk: trunkdev aggr0
media: Ethernet autoselect (1000baseT full-duplex,master)
status: active
...
aggr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr fe:e1:ba:d0:c3:51
index 11 priority 0 llprio 7
trunk: trunkproto lacp
trunk id: [(8000,fe:e1:ba:d0:c3:51,000B,0000,0000),
(0000,00:00:00:00:00:00,0000,0000,0000)]
em1 lacp actor system pri 0x8000 mac fe:e1:ba:d0:c3:51, key
0xb, port pri 0x8000 number 0x2
em1 lacp actor state activity,aggregation,defaulted
em1 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key 0x0,
port pri 0x0 number 0x0
em1 lacp partner state activity,aggregation,sync
em1 port disabled
em2 lacp actor system pri 0x8000 mac fe:e1:ba:d0:c3:51, key
0xb, port pri 0x8000 number 0x3
em2 lacp actor state activity,aggregation,defaulted
em2 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key 0x0,
port pri 0x0 number 0x0
em2 lacp partner state activity,aggregation,sync
em2 port disabled
em3 lacp actor system pri 0x8000 mac fe:e1:ba:d0:c3:51, key
0xb, port pri 0x8000 number 0x4
em3 lacp actor state activity,aggregation,defaulted
em3 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key 0x0,
port pri 0x0 number 0x0
em3 lacp partner state activity,aggregation,sync
em3 port disabled
groups: aggr
media: Ethernet autoselect
status: no carrier
inet 192.168.241.42 netmask 0xffffff00 broadcast 192.168.241.255
...
I also tried with tunk interface but this was also not working.
How can I find out, why the interface is not coming online?
Kind regards
Thomas
