Thanks for suggestions. I tried to alter my setup, but only managed to stop traffic. It seems I could use help to get this right.
So as I said, on box2 there are only em0->vlan20 cat /etc/hostname.em0 up cat /etc/hostname.vlan20 parent em0 vlan 20 vnetid 20 inet 192.168.20.2 255.255.255.0 192.168.20.255 up And I guess I can keep it that way. The issue is that I got different things going on box1, so I'll show. (There was vlan20 connected to vport2 connected to veb0.) First I guess I can then scrap vlan20 here and move the configuration to vport2. cat /etc/hostname.vport2 inet 192.168.20.1 255.255.255.0 192.168.20.255 up My current setup of veb0 was: cat /etc/hostname.veb0 add em1 add em2 add vport0 add vport1 add vport2 link0 up (I guess I can remove link0.) What I want here is for em1 and em2 to be one pool, so the physical interfaces are just one interface. And then I currently want vport0 and vport1 to transmit any kind of traffic, but vport2 to ONLY transmit packets with the vnetid 20. I tried a couple of variations of tagged and untagged here, but it only resulted in no traffic on any interface. Anybody can give me a hand in getting this right? -- Eivind Eide "ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD" - Oceania Association of Autonomous Astronauts
