Hi Roderick,

it depends, the more space you leave free
(having never written to the free space before)
  (if you have all ready written to the disk there are utilities) to
reset it so that the
 disk controller knows what blocks have never been written to, and can
re-allocate
under data that is been written and wearing out the flash

on servers with moderate levels of writes single purpose boxes getting
patched and some
webpages been updated,  10% seems to reduce failure rates over a
period of 5 years

on DB servers with lots of writes and consumer ssds 50% is what we use ...

so the more writes you intend to push to the disk the higher the
propability of wearing out the disk blocks
the more the controller will have to re-allocate spare unused blocks
under reall data whose original
were wearing out

on physical servers wth hardware raid I find creating a logial virtual
disk whose size is smaller than the physical ssds
works well and prevents accidental consumption of all the disk in an
install / upgrade  ...



On Tue, 10 Nov 2026 at 16:54, Roderick <[email protected]> wrote:
>
> Is it really necessary to leave free space when making the partition of a SSD?
>
> I left the last time 20% of the available sectors, but now I read that the
> manufacturer leaves the space free:
>
> https://www.kingston.com/en/blog/pc-performance/overprovisioning
>
> How much do you leave free?
>
> Rod.
>


-- 
Kindest regards,
Tom Smyth.

Reply via email to