Michael Steinfeld wrote:
If anyone cares here's the dmesg from my MacBook Pro. --OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Genuine Intel(R) CPU T2500 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz cpu0: FPU,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,CMOV,MMX,FXSR,SSE,SSE2,SS,SSE3 real mem = 268017664 (261736K) avail mem = 237674496 (232104K) using 3297 buffers containing 13504512 bytes (13188K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(5b) BIOS, date 03/22/06, BIOS32 rev. 0 @ 0xf9000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2000/112 (5 entries) pcibios0: PCI Exclusive IRQs: 3 4 5 7 9 10 11 12 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc0000/0x8000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) vga1 at pci0 dev 2 function 0 unknown vendor 0xaaaa product 0x1111 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ne3 at pci0 dev 5 function 0 "Realtek 8029" rev 0x00: irq 10 ne3: address 00:fa:e3:35:0c:23 pchb0 at pci0 dev 30 function 0 "Intel 82815 Hub" rev 0x02: rng active, 116Kb/sec ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x08: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <Virtual HDD [0]> wd0: 128-sector PIO, LBA, 4096MB, 8389584 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PRL, Virtual CD-ROM, R102> SCSI0 5/cdrom removable wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4 pciide0: channel 1 ignored (disabled) isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ebfd netmask effd ttymask ffff pctr: 686-class user-level performance counters enabled mtrr: CPU supports MTRRs but not enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 -- -mike
I'm waiting for mine to arrive. Have you tried 3.9-current?
