On Fri, Apr 07, 2006 at 11:44:38AM -0500, [EMAIL PROTECTED] wrote: > Hi, > > Writing to any logical drives beyond the primary causes hard lockup. > Newfs hangs towards the end of writing superblocks and the machine > needs to be powered off. The machine runs fine using only sd0. > > Others are using these cards; are there known firmware problems that > could be related? > > TIA > > 3.9 -current AMD64 bsd.mp
Try -current as of today. A fix was committed to ami (ami.c r1.143) to address problems with timeout setup on the sync cache command. It fixed similar hangups I was having. .... Ken > > # bioctl -hi ami0 > Volume Status Size Device > ami0 0 Online 73.6G sd0 RAID1 > 0 Online 74.5G 0:0.0 noencl <ST3808110AS 2AAA> > 1 Online 74.5G 0:1.0 noencl <ST3808110AS 2AAA> > ami0 1 Online 232G sd1 RAID1 > 0 Online 233G 0:2.0 noencl <ST3250824AS 3.AA> > 1 Online 233G 0:4.0 noencl <ST3250824AS 3.AA> > ami0 2 Online 232G sd2 RAID1 > 0 Online 233G 0:5.0 noencl <ST3250824AS 3.AA> > 1 Online 233G 0:7.0 noencl <ST3250824AS 3.AA> > > > OpenBSD 3.9-current (GENERIC.MP) #769: Mon Apr 3 17:19:21 MDT 2006 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2147020800 (2096700K) > avail mem = 1835683840 (1792660K) > using 22937 buffers containing 214908928 bytes (209872K) of memory > mainbus0 (root) > ipmi at mainbus0 not configured > mainbus0: Intel MP Specification (Version 1.4) (MSI RHAPSODY ) > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Opteron(tm) Processor 246, 1994.58 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line > 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Opteron(tm) Processor 246, 1994.32 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line > 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > mpbios: bus 0 is type PCI > mpbios: bus 1 is type PCI > mpbios: bus 2 is type PCI > mpbios: bus 3 is type PCI > mpbios: bus 4 is type PCI > mpbios: bus 5 is type ISA > ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins > ioapic1 at mainbus0 apid 3 pa 0xfebfe000, version 11, 4 pins > ioapic2 at mainbus0 apid 4 pa 0xfebff000, version 11, 4 pins > pci0 at mainbus0 bus 0: configuration mode 1 > ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07 > pci1 at ppb0 bus 4 > ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq > 9), version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq > 9), version 1.0, legacy support > usb1 at ohci1: USB revision 1.0 > uhub1 at usb1 > uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 3 ports with 3 removable, self powered > vga1 at pci1 dev 4 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05 > pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > amdiic0 at pci0 dev 7 function 2 "AMD 8111 SMBus" rev 0x02: SCI > iic0 at amdiic0 > lm1 at iic0 addr 0x2d: W83627HF > lm2 at iic0 addr 0x2f: W83782D rev D > amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active > iic1 at amdpm0 > ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x13 > pci2 at ppb1 bus 3 > bge0 at pci2 dev 5 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 > (0x2100): apic 3 int 2 (irq 5), address 00:30:48:77:04:6e > brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 > bge1 at pci2 dev 5 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 > (0x2100): apic 3 int 3 (irq 9), address 00:30:48:77:04:6f > brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 > aapic0 at pci0 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01 > ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x13 > pci3 at ppb2 bus 1 > ppb3 at pci3 dev 1 function 0 vendor "Intel", unknown product 0x0335 rev 0x07 > pci4 at ppb3 bus 2 > ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev 0x07: > apic 4 int 0 (irq 10) > ami0: LSI 3008, 32b, FW 813G, BIOS vH425, 128MB RAM > ami0: 1 channels, 0 FC loops, 3 logical drives > scsibus0 at ami0: 40 targets > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed > sd0: 75340MB, 75340 cyl, 64 head, 32 sec, 512 bytes/sec, 154296320 sec total > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed > sd1: 237464MB, 237464 cyl, 64 head, 32 sec, 512 bytes/sec, 486326272 sec total > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed > sd2: 237464MB, 237464 cyl, 64 head, 32 sec, 512 bytes/sec, 486326272 sec total > scsibus1 at ami0: 16 targets > aapic1 at pci0 dev 11 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01 > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > lm0 at isa0 port 0x290/8: W83627HF > lm1 detached > dkcsum: sd0 matches BIOS drive 0x80 > dkcsum: sd1 matches BIOS drive 0x81 > dkcsum: sd2 matches BIOS drive 0x82 > root on sd0a > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 > WARNING: / was not properly unmounted
