On Sat, Apr 15, 2006 at 04:29:28PM +0200, Jurjen Oskam wrote: > Hi there, > > I've just installed 3.9 on a machine with an Nvidia Nforce 4 Ultra > chipset (Asus A8N-E motherboard, latest BIOS). The nfe driver detects > the ethernet module, but it doesn't work, unfortunately. I'll describe > what I did and what the computer did, and hopefully I can help solve this. > > When starting dhclient (as part of the installation routine), for every > DHCP request sent by dhclient this message appears: > > nfe0: tx v2 error 0x6004 > > After this happened 10-15 times, I dropped to a shell and executed: > "ifconfig nfe0 192.168.1.10 netmask 255.255.255.0 up". Then, I typed > "ping 192.168.1.1". Immediately I got the error: > > nfe0: tx v2 error 0x6204 > > ... just once, and for every packet ping attempted to send I got "nfe0: tx > v2 error 0x6004" again.
You're on 10baseT Ethernet right? I don't think eephy(4) can cope with that. > > After that, I installed an RTL-8139-based Ethernet card in the machine and > used that. The dmesg was taken after rl0 was installed. > > Should I file a bug using sendbug? > > dmesg follows: > > OpenBSD 3.9 (GENERIC) #462: Thu Mar 2 03:52:16 MST 2006 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 2147020800 (2096700K) > avail mem = 1835884544 (1792856K) > using 22937 buffers containing 214908928 bytes (209872K) of memory > mainbus0 (root) > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Athlon(tm) 64 Processor 3500+, 2211.58 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3 > nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2 > iic0 at nviic0 > iic1 at nviic0 > ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 11, version > 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 5 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 5, > nForce4 AC97 > ac97: codec id 0x414c4790 (Avance Logic ALC850) > audio0 at auich0 > pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-24102B, 5S5A> SCSI0 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > atapiscsi1 at pciide0 channel 1 drive 0 > scsibus1 at atapiscsi1: 2 targets > cd1 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW LDW-811S, HS0R> SCSI0 5/cdrom > removable > cd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA > pciide1: using irq 11 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <WDC WD1200SD-01KCC0> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA > pciide2: using irq 5 for native-PCI interrupt > wd1 at pciide2 channel 0 drive 0: <WDC WD1200SD-01KCC0> > wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors > wd1(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5 > ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2 > pci1 at ppb0 bus 5 > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: irq 3, address > 00:10:a7:2a:84:6c > rlphy0 at rl0 phy 0: RTL internal PHY > nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 3, address > 00:13:d4:ae:99:b7 > eephy0 at nfe0 phy 9: Marvell 88E1111 Gigabit PHY, rev. 2 > ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > pci2 at ppb1 bus 4 > ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > pci4 at ppb3 bus 2 > ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3 > pci5 at ppb4 bus 1 > vga1 at pci5 dev 0 function 0 vendor "NVIDIA", unknown product 0x00f9 rev 0xa2 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x290/8: IT87 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > uhub2 at uhub0 port 3 > uhub2: Texas Instruments UT-USB41 hub, rev 1.10/1.10, addr 2 > uhub2: 4 ports with 4 removable, self powered > uhidev0 at uhub2 port 1 configuration 1 interface 0 > uhidev0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.11, addr 3, > iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub2 port 1 configuration 1 interface 1 > uhidev1: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.11, addr 3, > iclass 3/0 > uhidev1: 2 report ids > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhidev2 at uhub2 port 2 configuration 1 interface 0 > uhidev2: Logitech Optical USB Mouse, rev 2.00/3.40, addr 4, iclass 3/1 > ums0 at uhidev2: 3 buttons and Z dir. > wsmouse0 at ums0 mux 0 > dkcsum: wd0 matches BIOS drive 0x81 > dkcsum: wd1 matches BIOS drive 0x80 > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > > -- > Jurjen Oskam > > Savage's Law of Expediency: > You want it bad, you'll get it bad.