On 4/25/06, Siju George <[EMAIL PROTECTED]> wrote:
> Hi,
>
> Is ATI Radeon XPRESS 200 Graphics Chipset fully supported on 3.8?
> Anyone using it successfully?
>
> My Motherboard is
>
> http://www.directron.com/rs482m4ild.html
>
> amd64 athlon processor.
>
> Actually it was taken to replace a Debian Backupserver. Sarge amd64
> did not detect the 120GB SATA Hard disks. NetBSD 3.0 also did not
> detectthe disks. OpenBSD 3.8 Detected it without Problems :-)
>
> But finding it difficult to configure X to get Color Depth of 24 :-(
>
> Any pointers to get X running fine is highly appreciated :-)
>
Sorry I missed the "dmesg" :-(
--------------
OpenBSD 3.8 (GENERIC) #247: Sat Sep 10 15:53:26 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1039593472 (1015228K)
avail mem = 879919104 (859296K)
using 22937 buffers containing 104165376 bytes (101724K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2193.98 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 17 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3120827AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <ST3120827AS>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 18 function 0 "ATI IXP400 SATA" rev 0x80: DMA
pciide1: using irq 5 for native-PCI interrupt
ohci0 at pci0 dev 19 function 0 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 19 function 1 "ATI IXP400 USB" rev 0x80: irq 4,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 19 function 2 "ATI IXP400 USB2" rev 0x80: irq 4
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
"ATI IXP400 SMBus" rev 0x81 at pci0 dev 20 function 0 not configured
pciide2 at pci0 dev 20 function 1 "ATI IXP400 IDE" rev 0x80: DMA
(unsupported), channel 0 configured to compatibility, channel 1
configured to compatibility
atapiscsi0 at pciide2 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-RW CRX230E, QYS1> SCSI0
5/cdrom removable
pciide2: channel 1 ignored (not responding; disabled or no drives?)
vendor "ATI", unknown product 0x437b (class multimedia unknown
subclass 0x03, rev 0x01) at pci0 dev 20 function 2 not configured
"ATI IXP400 ISA" rev 0x80 at pci0 dev 20 function 3 not configured
ppb1 at pci0 dev 20 function 4 "ATI IXP400 PCI" rev 0x80
pci2 at ppb1 bus 2
skc0 at pci2 dev 0 function 0 "D-Link Systems DGE-530T" rev 0x11: irq 5
skc0: Marvell Yukon (0x1)
sk0 at skc0 port A: address 00:0f:3d:88:9e:d4
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
re0 at pci2 dev 3 function 0 "Realtek 8169" rev 0x10: irq 5, address
00:16:17:20:2a:a6
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
-----------------------------------------------
> Thankyou so much
>
> Kind Regards
>
> Siju
>
--
Siju Oommen George, Network Consultant. HiFX IT & MEDIA SERVICES PVT.
LTD. http://www.hifx.net
