2006/4/28, sec0 sec0 <[EMAIL PROTECTED]>:
> I'm using openbsd 3.8 -stable.
> My computer is a toshiba satellite s2450-401.
> While in console the keyboard works fine, but when I fire up X the
> keyboard doesn't behave properly.
> This means that when I press a key, instead of just appearing once,
> the char appears more times.
> This happens at random.
> I've googled and searched the mailing lists for it but I couldn't
> find any information.
> I've tried disabling the touchpad in the BIOS (this used to work under
> linux) but nothing changed.
> I've also tried changing the keyboard repeate rate with xset, but it
> was of no use.
>
> dmesg is as follows:
>
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye?, rev 2.00/0.00,
> add
> r 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> syncing disks... done
> rebooting...
> OpenBSD 3.8-stable (GENERIC) #1: Thu Apr 27 22:03:22 WEST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,
> ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 536256512 (523688K)
> avail mem = 482410496 (471104K)
> using 4278 buffers containing 26914816 bytes (26284K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 03/20/03, BIOS32 rev. 0 @ 0xfbfd7
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01a0/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
> cpe0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
> ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
> pci1 at ppb0 bus 1
> vga1 at pci0 dev 0 function 0 "Nvidia GeForce4 420 Go" rev 0xa3
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" pev 0x02: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82(01DB USB" rev 0x02: irq 11
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
> pci2 at ppb1 bus 2
> "Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci2 dev 7 function 0 not
> con
> figured
> rl0 at pci2 dev 9 function 0 "Realtek 8139" rev 0x10: irq 11 address
> 00:08:0d:80
> :a1:33
> rlphy0 at rl0 phy 0: RTL internal phy
> cbb0 at pci2 dev 11 function 0 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
> cbb1 at pci2 dev 11 function 1 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
> "Toshiba SD Controller" rev 0x03 at pci2 dev 13 function 0 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 c
> onfigured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-40>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E, 7.0A> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 11, ICH4
> AC9
> 7
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x02 at pci0 dev 31 function 6 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> biomask ef7d netmask ef7d ttymask ffff
> pctr: user-level cycle counter enabled
> ath0 at cardbus1 dev 0 function 0 "Atheros Communications, Inc.,
> AR5001-0000-000
> 0, Wireless LAN Reference Card": irq 11
> ath0: AR5212 5.6 phy 4.1 rf2112 4.6, ETSI4W, address 00:0d:88:52:47:33
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye?, rev 2.00/0.00,
> add
> r 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> OpenBSD 3.8-stable (GENERIC) #1: Thu Apr 27 22:03:22 WEST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,
> ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 536256512 (523688K)
> avail mem = 482410496 (471104K)
> using 4278 buffers containing 26914816 bytes (26284K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(63) BIOS, date 03/20/03, BIOS32 rev. 0 @ 0xfbfd7
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf01a0/160 (8 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x11
> ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x11
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Nvidia GeForce4 420 Go" rev 0xa3
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 11
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
> pci2 at ppb1 bus 2
> "Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci2 dev 7 function 0 not
> con
> figured
> rl0 at pci2 dev 9 function 0 "Realtek 8139" rev 0x10: irq 11 address
> 00:08:0d:80
> :a1:33
> rlphy0 at rl0 phy 0: RTL internal phy
> cbb0 at pci2 dev 11 function 0 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
> cbb1 at pci2 dev 11 function 1 "Toshiba ToPIC100 CardBus" rev 0x32: irq 11
> "Toshiba SD Controller" rev 0x03 at pci2 dev 13 function 0 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x0
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x0
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel
> 0 c
> onfigured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-40>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E, 7.0A> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 11, ICH4
> AC9
> 7
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x02 at pci0 dev 31 function 6 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> biomask ef7d netmask ef7d ttymask ffff
> pctr: user-level cycle counter enabled
> ath0 at cardbus1 dev 0 function 0 "Atheros Communications, Inc.,
> AR5001-0000-000
> 0, Wireless LAN Reference Card": irq 11
> ath0: AR5212 5.6 phy 4.1 rf2112 4.6, ETSI4W, address 00:0d:88:52:47:33
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye?, rev 2.00/0.00,
> add
> r 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
>
> Thanks in advance
>
You just have to install xkbset (ports/x11/xkbset) and to add the
following lines in .xinitrc :
xkbset exp bo &>/dev/null
xkbset bo 1 &>/dev/null
You can read http://www.thorstenhaas.de/toshiba2410/french.html#KEYBOARD.
This was my first post here :-)
--
NF
