solved
/bkw
On 29/04/06, Bachman Kharazmi <[EMAIL PROTECTED]> wrote:
I try to mount a nfs share over internet between two openbsd servers.
As faq describes rpcinfo -p on server should show that mountd listen
at "udp: 633 and tcp: 916"
But I get,
[EMAIL PROTECTED]:~/ > rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100005 1 udp 685 mountd
100005 3 udp 685 mountd
100005 1 tcp 939 mountd
100005 3 tcp 939 mountd
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
when I try to mount from client I get:
# showmount -e oden.lindesign.se
showmount: clnttcp_create: RPC: Port mapper failure - RPC: Timed out
# mount -t nfs 194.17.154.112:backup_loke backup_loke/
NFS Portmap: RPC: Port mapper failure - RPC: Timed out
my pf.conf lines on the server are:
[EMAIL PROTECTED]:~/ > sudo tail -n 3 /etc/pf.conf
pass in log on $ext_if proto tcp from 81.170.235.54 to port nfs keep state
pass in log on $ext_if proto tcp from 81.170.235.54 to port portmap keep state
pass in log on $ext_if proto {tcp,udp} from 81.170.235.54 to port
{685,939} keep state
[EMAIL PROTECTED]:~/ > tail -n 1 /etc/exports
/home/backup_loke -maproot=bkw 81.170.235.54
I know that my ISP doesn't block any of the ports, I can telnet to all
three of them. I do logging from where I can see action(pass) when I
try to telnet to any of the three ports from client. But when I do try
to mount I don't get any output in my pflog.
I'm on 3.8 release
any ideas are welcome
/bkw
