Hi,
I can't install 3.9 on my Sharp MM20. I don't have a working
usb<->serial so I can only attach the dmesg done via netbsd 3.0 I hope
that helps a bit.
The following happens:
After booting the bsd.rd kernel from cd (also tried booting it from usb
stick) the system `stops', i.e.
rootdev=0x10 rrootdev=0x310 rawdev=0x312
is the last line the system prints, but it isn't frozen. If I plug
in/out usb devices the appropriate kernel messages are appearing on the
screen. I also tried to install 3.9 on a usb stick from my workstation
and booted from that. Similar did happen after booting the kernel I get
a never ending series of:
process: pid(1) got signal 11
maybe the line isn't fully correct, I am writing it from memory, but it
indeed said that init keeps getting signal 11 (SIGSEGV ?). I'll keep on
trying to get a working usb<->serial so I can give you the dmesg OBSD
gives to me, but I hope that someone could give me hint how to fix this
problem.
If it is because of unsupported devices I would be thankful if someone
could tell me whom I have to - more or less - kindly ask for specs.
Thanks in advance,
Frank.
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
[EMAIL
PROTECTED]:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 486 MB
avail memory = 468 MB
BIOS32 rev. 0 found at 0xfd740
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Transmeta Pentium Pro compatible (686-class), 994.58 MHz, id 0xf24
cpu0: features 2fcbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 2fcbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features 2fcbf9ff<FXSR,SSE,SSE2,B27,LONG>
cpu0: "Transmeta Efficeon(tm) Processor TM8000"
cpu0: running without thermal monitor!
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Transmeta product 0x0060 (rev. 0x00)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Transmeta product 0x0061 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (AGP)
(rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 2 function 0: Acer Labs M5249 Hypertransport to PCI bridge
(rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcib0 at pci0 dev 3 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x20)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev
3 function 1 not configured
auacer0 at pci0 dev 4 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at irq 9
auacer0: ac97: Avance Logic ALC202 codec; headphone, 20 bit DAC, 18 bit ADC,
Realtek 3D
auacer0: ac97: ext id 607<AC97_22,AMAP,SPDIF,DRA,VRA>
audio0 at auacer0: full duplex, mmap, independent
Intersil PRISM Duette Mini-PCI WLAN (miscellaneous network, revision 0x01) at
pci0 dev 6 function 0 not configured
cbb0 at pci0 dev 9 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x81)
cbb0: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 3
rtk0: Ethernet address 08:00:1f:1c:72:2f
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
aceride0 at pci0 dev 14 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc5)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev.
0x03)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 15 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev.
0x03)
ohci1: interrupting at irq 5
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 15 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev.
0x01)
pci_intr_map: no mapping for pin D (line=ff)
ehci0: couldn't map interrupt
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
isapnp0: no ISA Plug 'n Play devices found
pcic0: controller 0 detecting irqs with mask 0xdeb8: none
pcic0: no available irq; polling for socket events
Kernelized RAIDframe activated
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: PQI USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB Flash Disk, 0.00> disk removable
sd0: 984 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 2015232 sectors
wd0 at atabus0 drive 0: <HITACHI_DK14FA-20>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--
What can you use used tampons for? Tea bags for vampires.
This signature looks poorly in your mail client? Go and get a real one.
Frank Brodbeck <[EMAIL PROTECTED]>
Politicians do it to everyone.
