Hi
I've problem to install 3.9 on my FS Amilo M3438G with a VIA VT6421
SATA and Intel 82801FB controller.
When the installation starts it says, no disk could be found.
In my bios I can only change minimized setting, I can't even see the
harddrive listed there, but I can see the cdrom.
I opened the lappy and found out that the disk is a Samsung SATA.
Another strange thing is that after a while in installation, the
system freeze and I've to reboot.
Google told me there are some problems with this laptop and playing
games in Windows, but that's not my case.
I have been able to boot various linux livecds on this laptop without problems.
Now I don't know if any support is missing in openbsd or I should add
anything while booting openbsd bootloader.
I did anyhow write a dmesg from shell which can be found bellow.
Any suggestions are welcome.
/bkw
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel"
686-class) 1.74 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1073127424 (1047976K)
avail mem = 973643776 (950824K)
using 4278 buffers containing 53760000 bytes (52500K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/29/05, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4590/288 (16 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x5000! 0xd4000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce Go 6800" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
"Intel PRO/Wireless 2200BG" rev 0x05 at pci3 dev 3 function 0 not configured
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci3 dev 4 function
0 not configured
re0 at pci3 dev 5 function 0 "Realtek 8169" rev 0x10: irq 3, address
00:03:0d:35:1e:6f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
pciide0 at pci3 dev 7 function 0 "VIA VT6421 SATA" rev 0x50: DMA
pciide0: using irq 10 for native-PCI interrupt
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide1 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+-RW ND-6650A, 1.42> SCSI0
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
uhid at uhidev0 not configured
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
