hmmm that should not have happened. I have to do some ipmi work one of these
days so i'll add this one to the list of things to look at.
On Tue, May 02, 2006 at 10:46:54AM -0400, Okan Demirmen wrote:
> Hi - So I have this wierd problem, which is duplicated on 3 identical
> machines, where I get a bunch of "bmc_io_wait fails" messages (see the
> end of the dmesg). The longer the machine is on, the more messages get
> tacked on. I'm wondering what this could be. Any ideas/hints?
>
> For the curious, the machines have bios rev. a20, 3.35 drac and 1.01
> backplane firmware.
>
> Thanks,
> Okan
>
> (dmesg and sysctl hw.sensors output included)
>
> OpenBSD 3.9-current (GENERIC) #720: Thu Apr 27 21:42:15 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 2146926592 (2096608K)
> avail mem = 1950842880 (1905120K)
> using 4256 buffers containing 107450368 bytes (104932K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 10/21/04, BIOS32 rev. 0 @ 0xffe90
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc410/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x6000 0xcf000/0x1800
> 0xd0800/0x600 0xec000/0x4000!
> ipmi0 at mainbus0: version 1.0 interface SMIC iobase 0xecf4/3 spacing 1
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x13
> pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC-WS Host (GC-LE)" rev 0x00
> pci1 at pchb1 bus 3
> bge0 at pci1 dev 6 function 0 "Broadcom BCM5701" rev 0x15, BCM5701 B5
> (0x0105): irq 11, address 00:0b:db:e3:ed:6e
> brgphy0 at bge0 phy 1: BCM5701 10/100/1000baseT PHY, rev. 0
> bge1 at pci1 dev 8 function 0 "Broadcom BCM5701" rev 0x15, BCM5701 B5
> (0x0105): irq 10, address 00:0b:db:e3:ed:6f
> brgphy1 at bge1 phy 1: BCM5701 10/100/1000baseT PHY, rev. 0
> pchb2 at pci0 dev 0 function 2 "ServerWorks CMIC-LE" rev 0x00
> pci2 at pchb2 bus 1
> "Dell DRAC 4 Embedded/Optional" rev 0x00 at pci0 dev 4 function 0 not
> configured
> "Dell PERC 3/Di" rev 0x00 at pci0 dev 4 function 1 not configured
> "Dell DRAC 3 Optional" rev 0x00 at pci0 dev 4 function 2 not configured
> vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: SMI
> iic0 at piixpm0: disabled to avoid ipmi0 interactions
> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, N102> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 5,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
> pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x03
> pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x03
> pci3 at pchb4 bus 4
> ppb0 at pci3 dev 8 function 0 "Intel 80303 IOP" rev 0x01
> pci4 at ppb0 bus 5
> ahc0 at pci4 dev 6 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 7
> scsibus1 at ahc0: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <COMPAQ, BD0186398C, BC1P> SCSI2 0/direct fixed
> sd0: 17365MB, 7001 cyl, 20 head, 254 sec, 512 bytes/sec, 35565080 sec total
> safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x5 SCSI BP, 1.1> SCSI2 3/processor
> fixed
> ahc1 at pci4 dev 6 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 11
> scsibus2 at ahc1: 16 targets
> pchb5 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pchb6 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
> pci5 at pchb6 bus 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fbe5 netmask ffe5 ttymask ffe7
> pctr: user-level cycle counter enabled
> ahc0: target 0 using 16bit transfers
> ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> bmc_io_wait fails : v=04 m=80 b=80 smicwait
> bmc_io_wait fails : v=04 m=41 b=40 smicwait
> wstartwriteerror reading: ESM MB -12 Volt
> bmc_io_wait fails : v=04 m=80 b=80 smicwait
> bmc_io_wait fails : v=04 m=41 b=40 smicwait
> wstartwriteerror reading: ESM GB1 1.4 Volt
> bmc_io_wait fails : v=04 m=80 b=80 smicwait
> bmc_io_wait fails : v=04 m=41 b=40 smicwait
> wstartwriteerror reading: ESM MB 3.3 Volt
> bmc_io_wait fails : v=04 m=80 b=80 smicwait
> error reading: Cover Intrusion
>
> $ sysctl hw.sensors
> hw.sensors.0=ipmi0, ESM Frt I/O Temp, 31.00 degC, OK
> hw.sensors.1=ipmi0, ESM CPU 1 Temp, 38.00 degC, OK
> hw.sensors.2=ipmi0, ESM CPU 2 Temp, 36.00 degC, OK
> hw.sensors.3=ipmi0, ESM Riser Temp, 32.00 degC, OK
> hw.sensors.4=ipmi0, ESM MB Bat Volt, 3.14 V DC, OK
> hw.sensors.5=ipmi0, ESM 3.3 FP Volt, 3.22 V DC, OK
> hw.sensors.6=ipmi0, ESM MB 3.3 Volt, 3.27 V DC, OK
> hw.sensors.7=ipmi0, ESM MB 5 Volt, 4.99 V DC, OK
> hw.sensors.8=ipmi0, ESM CPU Volt, 1.47 V DC, OK
> hw.sensors.9=ipmi0, ESM MB +12 Volt, 11.97 V DC, OK
> hw.sensors.10=ipmi0, ESM MB -12 Volt, -11.90 V DC, OK
> hw.sensors.11=ipmi0, ESM MB 2.5 Volt, 2.52 V DC, OK
> hw.sensors.12=ipmi0, ESM GB0 2.5 Volt, 2.54 V DC, OK
> hw.sensors.13=ipmi0, ESM GB1 2.5 Volt, 2.54 V DC, OK
> hw.sensors.14=ipmi0, ESM 5 AUX Volt, 5.11 V DC, OK
> hw.sensors.15=ipmi0, ESM GB0 1.8 Volt, 1.81 V DC, OK
> hw.sensors.16=ipmi0, ESM GB1 1.8 Volt, 1.83 V DC, OK
> hw.sensors.17=ipmi0, ESM GB0 1.4 Volt, 1.43 V DC, OK
> hw.sensors.18=ipmi0, ESM GB1 1.4 Volt, 1.44 V DC, OK
> hw.sensors.19=ipmi0, ESM VTT Volt, 1.27 V DC, OK
> hw.sensors.20=ipmi0, ESM MB Fan1 RPM, 6180 RPM, OK
> hw.sensors.21=ipmi0, ESM MB Fan2 RPM, 6180 RPM, OK
> hw.sensors.22=ipmi0, ESM MB Fan3 RPM, 7560 RPM, OK
> hw.sensors.23=ipmi0, ESM MB Fan4 RPM, 7680 RPM, OK
> hw.sensors.24=ipmi0, ESM MB Fan7 RPM, 7260 RPM, OK
> hw.sensors.25=ipmi0, Power Supply - 1, On, OK
> hw.sensors.26=ipmi0, Power Supply - 2, Off, CRITICAL
> hw.sensors.27=ipmi0, Cover Intrusion, Off, OK
> hw.sensors.28=safte0, temp0, 29.44 degC, OK
> hw.sensors.29=safte0, temp1, 28.89 degC, OK
