Hello, I had the same problem. During installation I had to disable pciide. boot bsd.rd -c disable pciide quit
After the installation I used the standard kernel without disabling pciide, the problem did not reappear. Regads Didier -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lasse Bach Sent: 04 May 2006 23:36 To: [email protected] Subject: Harddrive in soekris Hi folks, I'm installing 3.9 on my soekris 4801. I'm installing on new IBM travelstar harddrive. I't makes som strange errors? Can anyone enlighten me? Is it just a bad harddrive? I have attached a dmesg and the output which occured during installation. Thanks in advance - Lasse Bach OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133799936 (130664K) avail mem = 116527104 (113796K) using 1658 buffers containing 6791168 bytes (6632K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:84 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:85 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:86 nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ral0 at pci0 dev 10 function 0 "Ralink RT2560" rev 0x01: irq 11, address 00:08:a1:8d:36:cd ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTE721080G9AT00> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 "NS SC1100 X-Bus" rev 0x00 at pci0 dev 18 function 5 not configured ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered isa0 at gscpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask f3e5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 syncing disks... done OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133799936 (130664K) avail mem = 116527104 (113796K) using 1658 buffers containing 6791168 bytes (6632K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:84 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:85 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:8e:86 nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ral0 at pci0 dev 10 function 0 "Ralink RT2560" rev 0x01: irq 11, address 00:08:a1:8d:36:cd ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTE721080G9AT00> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 "NS SC1100 X-Bus" rev 0x00 at pci0 dev 18 function 5 not configured ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered isa0 at gscpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask f3e5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks dkcsum: wd0 matches BIOS drive 0x80 root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to Ultra-DMA mode 1 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to Ultra-DMA mode 0 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to DMA mode 2 wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0: soft error (corrected) wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to PIO mode 4 wd0(pciide0:0:0): using PIO mode 4 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0: soft error (corrected) Mount point for wd0d (size=409752k)? (or 'none' or 'done') /tmp Mount point for wd0e (size=3583944k)? (or 'none' or 'done') /usr Mount point for wd0f (size=5243112k)? (or 'none' or 'done') /var Mount point for wd0g (size=52428600k)? (or 'none' or 'done') /home Mount point for wd0d (size=409752k)? (or 'none' or 'done') [/tmp] done No more disks to initialize. OpenBSD filesystems: wd0a / wd0d /tmp wd0e /usr wd0f /var wd0g /home The next step *DESTROYS* all existing data on these partitions! Are you really sure that you're ready to proceed? [no] yes /dev/rwd0a: 409184 sectors in 406 cylinders of 16 tracks, 63 sectors 199.8MB in 2 cyl/dev/rwd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to Ultra-DMA mode 1 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to Ultra-DMA mode 0 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to DMA mode 2 wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn 33), retrying wd0: soft error (corrected) /dev/rwd0e: 7167888 sectors in 7111 cylinders of 16 tracks, 63 sectors 3499.9MB in 22 cyl groups (328 c/g, 161.44MB/g, 20608 i/g) wd0(pciide0:0:0): timeout wd0d: 819504 sectors in 813 cylinders of 16 tracks, 63 sectors type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0(pciide0:0:0): timeout type: ata c_bcount: 16384 c_skip: 0 pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 wd0: transfer error, downgrading to PIO mode 4 wd0(pciide0:0:0): using PIO mode 4 wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn 33), retrying wd0: soft error (corrected) /dev/rwd0f: 10486224 sectors in 10403 cylinders of 16 tracks, 63 sectors 5120.2MB in 32 cyl groups (328 c/g, 161.44MB/g, 20608 i/g) /dev/rwd0g: 104857200 sectors in 104025 cylinders of 16 tracks, 63 sectors 51199.8MB in 318 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
