> -----Original Message-----
> From: Chris Smith [mailto:[EMAIL PROTECTED]
> Sent: Friday, May 05, 2006 11:39 AM
> To: [email protected]
> Subject: Dell Latitude CPX and 3.9 + 802.11g card
>
> Anyone got a Dell Latitude CPX? If so - do the machines
> behave with 3.9
> at all? The hardware is pretty straightforward late 90s
> P3/BX/ATI Rage
> etc with very few Dell quirks AFAIK. I'm going to pick one
> up off ebay
> (if they work) to replace this bloody Toshiba M50 which just
> doesn't work
> at all (barely even in windows).
>
I got a CPX-J. I don't have X installed at the moment, but I know it
all worked in 3.8
And apm stand-by & suspend work too.
OpenBSD 3.9 (GENERIC) #1: Tue May 2 09:47:08 EDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 647 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 536301568 (523732K)
avail mem = 482349056 (471044K)
using 4278 buffers containing 26918912 bytes (26288K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/05/03, BIOS32 rev. 0 @
0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 4:48 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbd20/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE"
rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1225 CardBus" rev
0x01: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1225 CardBus" rev
0x01: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DCXA-210000>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1902B, 1A15> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
"unknown" at iic0 addr 0x18 not configured
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev 0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef4d netmask ef4d ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dc0 at cardbus0 dev 0 function 0 "Xircom, CardBus Ethernet 10/100 +
Modem 56, CBEM56G" irq 11 address 00:10:a4:98:21:95
tqphy0 at dc0 phy 0: 78Q2120 10/100 PHY, rev. 11
pccom3 at cardbus0 dev 0 function 1 "Xircom, CardBus Ethernet 10/100 +
Modem 56, CBEM56G": Xircom CardBus Ethernet 10/100 + Modem 56
pccom3: irq 11,: ti16750, 64 byte fifo
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
