If it helps, here is the dmesg of netbsd 3.0 running on the same machine
( which detects all the cards properly )
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
[EMAIL
PROTECTED]:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 503 MB
avail memory = 484 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel (686-class), 2992.83 MHz, id 0xf43
cpu0: features
bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
cpu0: features3 20000000<EM64T>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep disabled by BIOS
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2588 (rev. 0x05)
vga1 at pci0 dev 2 function 0: Intel product 0x258a (rev. 0x05)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 28 function 0: Intel 82801FB/FR PCI Express Port #0
(rev. 0x03)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: Intel product 0x0329 (rev. 0x09)
pci2 at ppb1 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 3 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at irq 11
wm0: 32-bit 66MHz PCI bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0e:0c:4b:44:93
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci1 dev 0 function 2: Intel product 0x032a (rev. 0x09)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 1 function 0: Digital Equipment DC21152 PCI-PCI Bridge
(rev. 0x03)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
fxp0 at pci4 dev 4 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at irq 10
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:50:8b:68:62:62
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci4 dev 5 function 0: i82558 Ethernet, rev 5
fxp1: interrupting at irq 7
fxp1: May need receiver lock-up workaround
fxp1: Ethernet address 00:50:8b:68:62:63
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd3)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
wm1 at pci5 dev 3 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm1: interrupting at irq 5
wm1: 32-bit 33MHz PCI bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:0e:0c:4b:44:92
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801FB LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801FR Serial ATA/Raid Controller (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using irq 11 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to compatibility mode
piixide1: couldn't map secondary channel cmd regs
Intel 82801FB/FR SMBus Controller (SMBus serial bus, revision 0x03) at
pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SR244W, , T01A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA)
wd0 at atabus2 drive 0: <ST3808110AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using
DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Thanks,
Josh
On Sat, 2006-05-06 at 21:37, josh wrote:
> Hello...
>
> Just bought an Intel Buckner 1U server, which has a SR1425BK1NA type
> motherboard on it.
>
> It has two 1000Mbit intel nics on-board, and I put in a dual port fxp
> card ( which has worked before on other machines ).
>
> Using OpenBSD 3.9, Only em0 shows up, and nothing else... any ideas?
>
> Here is the dmesg:
> ...
