I recently upgraded (via clean install) a machine that was previously
running 3.8 and wi in hostap, without incident for the last six months
or so, to 3.9 running ral in hostap. While all other hardware on the
system has remained unchanged, the box has locked up five times in the
last five days at various times. Basically, everything freezes, no
response to pings, and there is no apparent panic--just a blinking
cursor on an unresponsive monitor after the login prompt. The system
appears to lockup when moving a larger amount of traffic than usual, but
I'm not certain, and, while this does not occur just prior to the
freeze, one thing I've noticed that didn't occur before the upgrade is
the following making its way occasionally into /var/log/messages:
May 10 07:21:57 meth /bsd: fxp0: warning: SCB timed out
May 10 07:22:09 meth last message repeated 60 times
May 10 07:22:14 meth /bsd: fxp0: device timeout
Any thoughts on how to proceed (outside of possibly replacing "known
good" hardware)?
Thanks.
$ dmesg
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 647 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 133668864 (130536K)
avail mem = 115249152 (112548K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 1:50 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG MP0402H>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1317> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 7 function 0 not configured
vendor "Toshiba", unknown product 0x0d01 (class wireless subclass IrDA,
rev 0x00) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC95B CardBus" rev 0x07: irq
11
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC95B CardBus" rev 0x07: irq
11
yds0 at pci0 dev 12 function 0 "Yamaha 744" rev 0x02: irq 11
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
biomask ef65 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
fxp0 at cardbus0 dev 0 function 0 "INTEL(R), PRO/100 CARDBUS II,
MBLA3300": INTEL(R) PRO/100 CARDBUS II: irq 11, address
00:03:47:18:1f:5d
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500,
802.11 CardBus Reference Card": irq 11, address 00:0e:3b:07:a2:13
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AKM 3D
audio0 at yds0
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
pppoe0: phase establish
pppoe0: phase authenticate
pppoe0: phase network
