Hello,
My wireless card (Asus WL-107G - Ralink RT2500 based) isn't detected
at boot time, even though it works in the same laptop *Compaq Presario
920EA) under other OS's.
Here's the dmesg output (suggesting some problem with PCMCIA):
OpenBSD 3.9-current (GENERIC) #0: Fri May 12 10:47:58 WEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Athlon(tm) XP 2000+ ("AuthenticAMD" 686-class, 256KB
L2 cache) 1.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 788029440 (769560K)
avail mem = 710823936 (694164K)
using 4256 buffers containing 39505920 bytes (38580K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(75) BIOS, date 10/24/02, BIOS32 rev. 0 @
0xfd760, SMBIOS rev. 2.3 @ 0xdf010 (16 entries)
bios0: Compaq Presario 900
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd760/0x8a0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xdf000/0x1000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS100 AGP" rev 0x13
ppb0 at pci0 dev 1 function 0 "ATI RS100 PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon IGP 320M" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 5
ac97: codec id 0x41445363 (Analog Devices AD1886A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1410 CardBus" rev
0x02pci_intr_map: no mapping for pin A
: couldn't map interrupt
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x20: irq 11, address
00:0b:cd:15:bf:8a
rlphy0 at rl0 phy 0: RTL internal PHY
"Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 12 function 0 not configured
ohci1 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: irq
11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N030ATCS04-0>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R2102, 1A16> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
alipm0 at pci0 dev 17 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock
iic0 at alipm0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pccom3 at pcmcia0 function 0: can't allocate i/o space
pcmcia1 at pcic0 controller 0 socket 1
pcic_chip_socket_enable: status c
pcic_wait_ready: ready never happened, status = 0c
pccom4 at pcmcia1 function 0: can't allocate i/o space
pcic0: irq 3, polling enabled
biomask ef55 netmask ef55 ttymask ffdf
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
I welcome any advice.
Thank you,
Ari Constancio
