hi mitja,
On Wed, May 17, 2006 at 12:13:38PM +0200, Mitja wrote:
> It is still not possible to select another channel number so I will unset
> that channel.
> BOX1# ifconfig ath0 inet 172.31.0.5 netmask 255.255.255.252 media autoselect
> mediaopt hostap nwid testlink1 mode 11g
> -chan 52
>
> Now the box panics and reboots.
>
uh, that should not happen. thanks.
unfortunately, 802.11a/g may not work with most of the current ar5212
chipsets at the moment.
btw.: could you submit a bugreport with sendbug(1). misc@ is not the
preferred way to report bugs.
reyk
> fatal integer divide fault (8) in supervisor mode
> trap type 8 code 0 eip d02ea0ae cs 50 eflags 10a06 cr2 85f62408 cpl 50
> panic: trap type 8, code=0, pc=d02ea0ae
> Starting stack trace...
> panic(d191d820,0,d191d884,d0572eea,d083e6db) at panic+0xa4
> panic(d083e6db,8,0,d02ea0ae,8) at panic+0xa4
> trap() at trap+0x2b6
> --- trap (number 8) ---
> ar5k_ar5212_reset(d1ce8000,6,d191db30,1,d191db34,d1ce6682,14,dbc09010) at
> ar5k_ar5212_reset+0x93a
> ath_chan_set(d1ce6000,d1ce6682,0,d191dbb0) at ath_chan_set+0xa8
> ath_newstate(d1ce6030,4,ffffffff,d038f0c5) at ath_newstate+0xe6
> ieee80211_create_ibss(d1ce6030,d1ce6682,d191dd64,d04423c7) at
> ieee80211_create_ibss+0x1e7
> ieee80211_end_scan(d1ce6030,d1ce629e,d191dd94,d03b4af3) at
> ieee80211_end_scan+0x3f1
> ieee80211_next_scan(d1ce6030,14,d191ddc4,d03d28db) at ieee80211_next_scan+0xbd
> ath_next_scan(d1ce6000,d189e4e0,2710,0) at ath_next_scan+0x42
> softclock(d1910058,10,d17f0010,10,d191c000) at softclock+0x3cc
> Bad frame pointer: 0xd191de04
> End of stack trace.
> syncing disks... done
>
>
> If I repeate the process of changing modes and channel I can get the same
> result on BOX2.
>
> BOX2 dmesg and panic report:
> OpenBSD 3.9-current (GENERIC-RD) #0: Tue May 16 13:38:36 CEST 2006
> [EMAIL PROTECTED]:/data/soekris/flashboot/obj/GENERIC-RD
> cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
> 586-class) 267 MHz
> cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
> cpu0: TSC disabled
> real mem = 133787648 (130652K)
> avail mem = 97685504 (95396K)
> using 1658 buffers containing 6791168 bytes (6632K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840
> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc8000/0x9000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
> sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
> address 00:00:24:c5:02:08
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
> sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
> address 00:00:24:c5:02:09
> nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
> sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
> address 00:00:24:c5:02:0a
> nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
> ath0 at pci0 dev 14 function 0 "Atheros AR5212" rev 0x01: irq 11
> ath0: AR5213 5.6 phy 4.1 rf5112 3.6, FCC2A*, address 00:02:6f:39:61:8b
> gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
> gpio0 at gscpcib0: 64 pins
> "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
> pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
> wired to compatibility, channel 1 wired to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA THNCF128MMG>
> wd0: 1-sector PIO, LBA, 122MB, 250368 sectors
> wd0(pciide0:0:0): using PIO mode 2
> geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision
> 3 wdstatus 0
> ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> isa0 at gscpcib0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
> gpio1 at nsclpcsio0: 29 pins
> gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> biomask f3e5 netmask ffe5 ttymask ffe7
> rd0: fixed, 30720 blocks
> pctr: no performance counters in CPU
> dkcsum: wd0 matches BIOS drive 0x80
> root on rd0a
> rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> ath0: device timeout
> panic: ieee80211_newstate: bogus xmit rate 7 setup
>
> Starting stack trace...
> panic(dbc6190c,0,dbc61950,d04471c7,d08227ab) at panic+0xa4
> panic(d08227ab,d082275e,7,1,1) at panic+0xa4
> ieee80211_fix_rate(d1ce6030,4,ffffffff,0) at ieee80211_fix_rate+0x869
> ath_newstate(d1ce6030,4,ffffffff,0) at ath_newstate+0x2a0
> ieee80211_create_ibss(d1ce6030,d1ce6366,6,d02ef016) at
> ieee80211_create_ibss+0x1e7
> ieee80211_fix_rate(d1ce6030,1,ffffffff,0) at ieee80211_fix_rate+0x62a
> ath_newstate(d1ce6030,1,ffffffff,d1ce6682) at ath_newstate+0x2a0
> ath_init1(d1ce6000,ffffffff,2,6) at ath_init1+0x292
> ath_init(d1ce6030,d4deb708,0,d1ce8000) at ath_init+0x13
> ath_media_change(d1ce6030,20280,ffffffff,d03df732) at ath_media_change+0x37
> ifmedia_ioctl(d1ce6030,dbc61e78,d1ce69e4,c0206935) at ifmedia_ioctl+0xe4
> ieee80211_ioctl(d1ce6030,c0206935,dbc61e78,d4d4e008) at ieee80211_ioctl+0x284
> ath_ioctl(d1ce6030,c0206935,dbc61e78,d03ee9ed) at ath_ioctl+0x1be
> ifioctl(d4d5819c,c0206935,dbc61e78,d4d4e008) at ifioctl+0x634
> soo_ioctl(d4dd0e70,c0206935,dbc61e78,d4d4e008) at soo_ioctl+0x1dd
> sys_ioctl(d4d4e008,dbc61f58,dbc61f50,0) at sys_ioctl+0x552
> syscall() at syscall+0x2c0
> --- syscall (number 54) ---
> 0xbf869a1:
> End of stack trace.
>
>
> Any clues? Am I missusing the commands?
>
> Best regards,
> Mitja
>
--
/* .vantronix|secure systems - (research & development)
* reyk floeter - friendly known free software engineer
* [EMAIL PROTECTED] - http://team.vantronix.net/reyk/
*/
