hello,
i have a windows (ntfs) partition and an openbsd partition on my hard drive.
i am trying to mount the windows partition. but no success so far:
mount -t ntfs /dev/wd0i /mnt
it fails with an error message saying that operation is not supported.
below is output of both fdisk and disklabel. disklabel says that partition
i: is of unknown type. i assume that this is the ntfs partition. that is why
i used wd0i in the command above. i am new to this so i can be all wrong. it
looks like openbsd does not know that this is ntfs partition so mount fails.
but since mount does recognise the '-t ntfs' option i figure that mounting
ntfs partitions is supported. no? if so, what am i doing wrong?
please help
thanks
konstantin
Disk: wd0 geometry: 3737/255/63 [60034905 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
*0: 07 0 1 1 - 1867 254 63 [ 63: 30009357 ] HPFS/QNX/AUX
1: A6 1868 0 1 - 3736 254 63 [ 30009420: 30025485 ] OpenBSD
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: IBM-DTLA-307030
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 60036480
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
a: 523908 30009420 4.2BSD 2048 16384 328 # Cyl 29771*-
30290
b: 1048320 30533328 swap # Cyl 30291 -
31330
c: 60036480 0 unused 0 0 # Cyl 0 -
59559
d: 524160 31581648 4.2BSD 2048 16384 328 # Cyl 31331 -
31850
e: 1048320 32105808 4.2BSD 2048 16384 328 # Cyl 31851 -
32890
f: 12582864 33154128 4.2BSD 2048 16384 328 # Cyl 32891 -
45373
g: 12582864 45736992 4.2BSD 2048 16384 328 # Cyl 45374 -
57856
i: 30009357 63 unknown # Cyl 0*-
29771*
