I would like to get hook my TV up to my OpenBSD system
using the S/Video and headphone ports. The sound plays
fine but I can't get the video to work.
I failed to get atitvout to compile, and I haven't had
any luck with gatos tv_output either. Isn't there some
modification to x.org for the s/video output
configuration?
My dmesg follows:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT
2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 752
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133648384 (130516K)
avail mem = 115331072 (112628K)
using 1657 buffers containing 6787072 bytes (6628K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/07/02,
BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 47%
apm0: AC off, battery charge high, estimated 1:58
hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbd80/176
(9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev
0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev
0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev
0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments
PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments
PCI1420 CardBus" rev 0x00: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4
ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE"
rev 0x01: DMA, channel 0 wired to compatibility,
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C>
SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev
0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x03 at pci0 dev 7 function
3 not configured
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev
0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel
3D
audio0 at esa0
xl0 at pci0 dev 16 function 0 "3Com 3c556 100Base-TX"
rev 0x10: irq 11, address 00:04:76:42:21:06
tqphy0 at xl0 phy 0: 78Q2120 10/100 PHY, rev. 11
"3Com V.90 Modem" rev 0x10 at pci0 dev 16 function 1
not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8,
lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8,
lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef4d netmask ef4d ttymask ffcf
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
rtw0 at cardbus1 dev 0 function 0 "Realtek, Rtl8139,
\M^?\M^?" irq 11
rtw0: ver RTL8180F, radio MAX2820, amp MAX2422,
address 00:0c:41:4a:de:96
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
