Hi,
I recently purchased a 1GB Creative Zen Nano Plus, and experience
problems mounting it on the snapshot from 7th of June. It doesn't work
on 3.9 either, but mounts OK on Windows and Linux.
$ sudo mount /dev/sd0i /mnt^M
mount_msdos: /dev/sd0i on /mnt: not an MSDOS filesystem
$
Disklabel of the Zen Nano:
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: Zen Nano Plus
flags:
bytes/sector: 2048
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 248
total sectors: 509184
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 509184 0 unused 0 0 # Cyl 0 - 248*
i: 509133 51 MSDOS # Cyl 0*- 248*
dmesg:
OpenBSD 3.9-current (GENERIC) #870: Wed Jun 7 17:11:37 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.54
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536379392 (523808K)
avail mem = 481722368 (470432K)
using 4256 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b1) BIOS, date 06/30/03, BIOS32 rev. 0 @ 0xfb490,
SMBIOS rev. 2.2 @ 0xf0000 (37 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 11, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 5, version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 12
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 12, address
00:04:61:4d:30:9f
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
eap0 at pci1 dev 8 function 0 "Ensoniq CT5880" rev 0x02: irq 5
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
rl0 at pci1 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:04:61:4d:30:3b
rlphy1 at rl0 phy 0: RTL internal PHY
"AT&T/Lucent FW322 1394" rev 0x61 at pci1 dev 13 function 0 not configured
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-0>
wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG SV1604N>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4165B, DL03> SCSI0 5/cdrom
removable
wd2 at pciide0 channel 1 drive 1: <WDC WD2000BB-00GUA0>
wd2: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce4 MX 440" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub2 port 1
ugen0: Canon CanoScan, rev 2.00/3.06, addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub1 port 2 configuration 1 interface 0
uhidev2: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0 at uhidev2: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: CREATIVE Zen Nano Plus, rev 2.00/11.11, addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <CREATIVE, Zen Nano Plus, 1111> SCSI4 0/direct
removable
sd0: 994MB, 248 cyl, 64 head, 32 sec, 2048 bytes/sec, 509184 sec total
--
Antti Nykdnen | [EMAIL PROTECTED] | http://aon.iki.fi/
