I have upgraded the kernel but not userland to 3.9-current as of a few hours ago. I do plan to update userland, I just wanted to check that the kernel would boot on the machine before I do.
Bob Beck suggested testing current as it has fixes for ami/bge problems we have been experiencing. See http://marc.theaimsgroup.com/?l=openbsd-misc&m=115024220026846&w=2 http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=5144 After rebooting with the new kernel the ipmi card which is a Tyan Taro M3289 is no longer being configured. This was working on 3.9, dmesg is available in linked post above, 3.9-current dmesg is below. On the upside we now have a adt0 device that did not seem to exist before. Thanks for any suggestions. -- nich OpenBSD 3.9-current (GENERIC.MP) #1: Fri Jun 16 15:21:33 EST 2006 [EMAIL PROTECTED]:/usr/src/current-20060615/sys/arch/amd64/compile/GENERIC .MP real mem = 4227461120 (4128380K) avail mem = 3632005120 (3546880K) using 22937 buffers containing 422952960 bytes (413040K) of memory mainbus0 (root) bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf98a0 (64 entries) bios0: To Be Filled By O.E.M. To Be Filled By O.E.M. ipmi at mainbus0 not configured mainbus0: Intel MP Specification (Version 1.1) (TYAN S2882 ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Opteron(tm) Processor 246, 1991.42 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16- way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD Opteron(tm) Processor 246, 1991.24 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF LUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16- way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type PCI mpbios: bus 5 is type ISA ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins ioapic1 at mainbus0 apid 3 pa 0xfebff000, version 11, 4 pins ioapic2 at mainbus0 apid 4 pa 0xfebfe000, version 11, 4 pins pci0 at mainbus0 bus 0: configuration mode 1 ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07 pci1 at ppb0 bus 4 ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq 9), v ersion 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq 9), v ersion 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered siop0 at pci1 dev 4 function 0 "Symbios Logic 53c895" rev 0x02: apic 2 int 16 (i rq 10), using 4K of on-board RAM scsibus0 at siop0: 16 targets pciide0 at pci1 dev 5 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA pciide0: using apic 2 int 19 (irq 9) for native-PCI interrupt vga1 at pci1 dev 6 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 18 (irq 11), address 00:e0:81:41:0c:06 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05 pciide1 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 configu red to compatibility, channel 1 configured to compatibility pciide1: channel 0 disabled (no drives) atapiscsi0 at pciide1 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4167B, DL10> SCSI0 5/cdrom r emovable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2 amdiic0 at pci0 dev 7 function 2 "AMD 8111 SMBus" rev 0x02: SCI iic0 at amdiic0 amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active iic1 at amdpm0 lm1 at iic1 addr 0x28: W83627HF adt0 at iic1 addr 0x2e: adm1027 rev 0x60 ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12 pci2 at ppb1 bus 3 bge0 at pci2 dev 9 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 (0x2003): apic 3 int 0 (irq 10), address 00:e0:81:41:0c:70 brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge1 at pci2 dev 9 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 (0x2003): apic 3 int 1 (irq 5), address 00:e0:81:41:0c:71 brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 aapic0 at pci0 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01 ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12 pci3 at ppb2 bus 1 ppb3 at pci3 dev 3 function 0 "Intel IOP331 PCIX-PCIX" rev 0x07 pci4 at ppb3 bus 2 ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev 0x07: api c 4 int 0 (irq 10) ami0: LSI 3008, 32b, FW 814C, BIOS vH431, 128MB RAM ami0: 1 channels, 0 FC loops, 3 logical drives scsibus2 at ami0: 40 targets sd0 at scsibus2 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 31744MB, 31744 cyl, 64 head, 32 sec, 512 bytes/sec, 65011712 sec total sd1 at scsibus2 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed sd1: 287396MB, 287396 cyl, 64 head, 32 sec, 512 bytes/sec, 588587008 sec total sd2 at scsibus2 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed sd2: 287396MB, 287396 cyl, 64 head, 32 sec, 512 bytes/sec, 588587008 sec total scsibus3 at ami0: 16 targets aapic1 at pci0 dev 11 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01 pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627HF lm1 detached fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec dkcsum: sd0 matches BIOS drive 0x80 dkcsum: sd1 matches BIOS drive 0x81 dkcsum: sd2 matches BIOS drive 0x82 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
