On Fri, Jun 16, 2006 at 10:39:44AM -0800, Jon Holderith wrote:
> Supermicro 5015M-MR uses Supermicro PDSMi motherboard (Intel E7230 chipset)
>
> Kernel hangs after "pcibios0: PCI bus #6 is the last bus"
> Changed pcibios flags to 1 with UKC and enabled verbose mode.
> Kernel then hangs during ppb probe
> Changed pcibios flags to 1 and disabled ppb and Kernel finished loading.
>
> Same result with bsd.mp
>
> Is there anything else I can try that will shed more light on this issue?
yes. flags 2 or otherwise just disable pcibios completely.
> OpenBSD 3.9-current (GENERIC) #882: Thu Jun 15 12:43:50 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.78 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16
> real mem = 1072128000 (1047000K)
> avail mem = 970346496 (947604K)
> using 4256 buffers containing 53710848 bytes (52452K) of memory
> User Kernel Config
> UKC> change pcibios
> 284 pcibios0 at bios0 flags 0x0
> change (y/n) ?
> flags [0] ? 1
> 284 pcibios0 changed
> 284 pcibios0 at bios0 flags 0x1
> UKC> disable ppb
> 89 ppb* disabled
> UKC> quit
> Continuing...
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(66) BIOS, date 04/17/06, BIOS32 rev. 0 @ 0xfd470,
> SMBIOS rev. 2.51 @ 0x3feea000 (33 entries)
> bios0: Supermicro PDSMi
> pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
> pcibios0: PCI BIOS has 20 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
> pcibios0: PCI bus #6 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> ipmi at mainbus0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x81
> "Intel E7230 PCIE" rev 0x81 at pci0 dev 1 function 0 not configured
> "Intel 82801GB PCIE" rev 0x01 at pci0 dev 28 function 0 not configured
> "Intel 82801G PCIE" rev 0x01 at pci0 dev 28 function 4 not configured
> "Intel 82801G PCIE" rev 0x01 at pci0 dev 28 function 5 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 10
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 5
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> "Intel 82801BA AGP" rev 0xe1 at pci0 dev 30 function 0 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
> channel 0
> configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E-N, 1.AA> SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
> channel 0
> configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using irq 10 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <ST3250623NS>
> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
> iic0 at ichiic0
> lm1 at iic0 addr 0x2d: W83627HF
> lm2 at iic0 addr 0x2f: W83792D rev D
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
> wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> lm1 detached
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ff65 netmask ff65 ttymask ffe7
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
--
paranoic mickey (my employers have changed but, the name has remained)
