On Sat, Jun 17, 2006 at 01:41:27AM +0000, Travers Buda wrote: > Looks like a crappy bios (pardon the redundancy,) try > > boot> boot -c > > UKC > disable pcibios > UKC > quit
this obviously has nothing to do w/ pcibios. disable ipmi would be a better solution. i think this was fixed in -current that you should try as well plz. cu > On Sat, 17 Jun 2006 00:45:29 +0100 > Craig Skinner <[EMAIL PROTECTED]> wrote: > > > Hi List, > > > > I've just installed 3.9 RELEASE on an i386 and got a kernel page > > fault. > > > > Booted the box from the floppy39.fs, sliced the disk, installed some > > sets & rebooted, as per normal. > > > > I don't use this box very often and the last release I had on it was > > 3.6, which worked fine. > > > > Where do I go from here? 3.8? > > > > I piped the boot output from tip into a file: > > > > =07connected=0D > > =FC>> OpenBSD/i386 BOOT 2.10 > > =0Dbooting hd0a:/bsd: \=08|=08/=08-=08\=084966344|=08/=08-=08\=08|=08/ > > =08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08- > > =08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= > > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/ > > =08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08- > > =08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08 > > \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= > > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/ > > =08-= =08\=08+867848 [52+255872|=08/=08-=08\=08|=08/=08-=08\=08|=08/ > > =08-=08\=08|= =08/=08-=08+237161\=08|=08/=08-=08\=08|=08/=08-=08\=08| > > =08/=08-=08\=08|=08/= =08]=3D0x608d64 entry point at 0x100120 > > > > [ using 493460 bytes of bsd ELF symbol table ] > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights > > reserved. Copyright (c) 1995-2006 OpenBSD. All rights reserved. > > http://www.OpenBSD.o= rg > > > > OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006 > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > > cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) > > 635 MHz cpu0: > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE= > > 36,MMX,FXSR,SSE real mem =3D 199729152 (195048K) > > avail mem =3D 175271936 (171164K) > > using 2463 buffers containing 10088448 bytes (9852K) of memory > > mainbus0 (root) > > bios0 at mainbus0: AT/286+(00) BIOS, date 01/15/99, BIOS32 rev. 0 @ > > 0xfdb70 apm0 at bios0: Power Management spec V1.2 > > apm0: AC on, battery charge unknown > > apm0: flags 30102 dobusy 0 doidle 1 > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > > pcibios0: PCI BIOS has 9 Interrupt Routing table entries > > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev > > 0x00) pcibios0: PCI bus #1 is the last bus > > bios0: ROM list: 0xc0000/0x8000 > > uvm_fault(0xd05c2f60, 0xdeeb8000, 0, 1) -> e > > kernel: page fault trap, code=3D0 > > Stopped at scan_smbios+0xb9: cmpb $0,0(%ebx) > > ddb>=20 > -- paranoic mickey (my employers have changed but, the name has remained)
