Hello,
I am running gnokii apllication (http://www.gnokii.org/) version 0.6.12 to get
SMS messages from a Nokia mobile phone
connected to USB. From time to time the uhci1 host controller stops responding.
The error message is:
uhci1: host controller process error
uhci1: host controller halted
uhci_freex: xfer=0xd1e83900 not busy, 0x4f4e5155
uhci_freex: xfer=0xd1e1d900 not busy, 0x4f4e5155
uhci_freex: xfer=0xd1ea8f00 not busy, 0x4f4e5155
Any hints?
Dmesg:
=====================================================================
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1073258496 (1048104K)
avail mem = 972615680 (949820K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e2) BIOS, date 08/03/04, BIOS32 rev. 0 @ 0xfbb30
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf64
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "S3 Trio64V2/DX" rev 0x16
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci2 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: irq 5,
address 00:0e:0c:37:bf:52
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:04:61:4b:0c:e4
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1
configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HDS722525VLAT80>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6Y120P0>
wd1: 16-sector PIO, LBA, 117246MB, 240121728 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1
configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd2 at pciide1 channel 0 drive 0: <WDC WD2500SD-01KCB0>
wd2: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd3 at pciide1 channel 1 drive 0: <WDC WD2500SD-01KCB0>
wd3: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd3(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 11, ICH5
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
umodem0 at uhub1 port 1 configuration 1 interface 0
umodem0: vendor 0x0421 product 0x0802, rev 1.10/1.00, addr 2, iclass 2/2
umodem0: data interface 1, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhci1: host controller process error
uhci1: host controller halted
uhci_freex: xfer=0xd1e83900 not busy, 0x4f4e5155
uhci_freex: xfer=0xd1e1d900 not busy, 0x4f4e5155
uhci_freex: xfer=0xd1ea8f00 not busy, 0x4f4e5155
