My firewall just failed over to the standby firewall (running carp).
They have been running fine for nearly a year, the only thing done to
them was upgrade to 3.9 last may.
The primary firewall is set to preempt but will not take over as master.
Probably a good thing because I think a card (fxp2) has failed.
I saw something in the archive about testing a patch for 3.6 that
writes the eeprom on first boot, but then doesn't again after. This
dmesg is after about 3 reboots in a row, does this mean the firwmware
is fried?
dmesg:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 1600+ ("AuthenticAMD" 686-class, 256KB L2
cache) 1.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 1073307648 (1048152K)
avail mem = 972660736 (949864K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(82) BIOS, date 05/07/03, BIOS32 rev. 0 @ 0xf17b0
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
apm0: flags b0102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1e62
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1d90/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xcc00 0xd0000/0x1800 0xd4000/0x1000 0xd8000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cmpci0 at pci0 dev 5 function 0 "C-Media Electronics CMI8738/C3DX
Audio" rev 0x10: irq 10
audio0 at cmpci0
uhci0 at pci0 dev 9 function 0 "VIA VT83C572 USB" rev 0x50: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 9 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 9 function 2 "VIA VT6202 USB" rev 0x51: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
fxp0 at pci0 dev 12 function 0 "Intel 8255x" rev 0x0c, i82550: irq 5,
address 00:0e:0c:71:1d:91
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 13 function 0 "Intel 8255x" rev 0x08, i82559: irq 11,
address 00:90:37:34:55:26
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci0 dev 14 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
address 00:90:37:34:54:4d
fxp2: Disabling dynamic standby mode in EEPROM, New ID 0x4080, cksum @
0x3f: 0xffff -> 0xc701
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
fxp3 at pci0 dev 15 function 0 "Intel 8255x" rev 0x08, i82559: irq 12,
address 00:90:27:43:4f:b6
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4
fxp4 at pci0 dev 16 function 0 "Intel 8255x" rev 0x0c, i82550: irq 5,
address 00:0e:0c:74:ef:11
inphy4 at fxp4 phy 1: i82555 10/100 PHY, rev. 4
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
asbtm0 at iic0 addr 0x2d
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00CRA1>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CyberDrv, CW078D CD-R/RW, 120D> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 9
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 9
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
